Proceedings of the Safety Management and Science Conference (대한안전경영과학회:학술대회논문집)
Korea Safety Management & Science
- Semi Annual
Domain
- Construction/Transportation > Infra-structure Inspection/Evaluation
2003.05a
-
We purpose a decision model to select the optimal facilities for the Decision Making problems with multiple characteristics(nominal-is-best characteristics, larger-is -better characteristics, smaller- is -better characteristics). Using this model, concept of the loss function is used in this comprehensive method of for select the optimal preferred facilities. To solve the issue on the optimal preferred facilities for multiple characteristics, this study propose the loss function with cross-product terms among the characteristics and derived range of the coefficients of the terms.
-
오늘날 건설산업분야는 기술적인 것은 물론 경제, 정보면에서도 그 어느때보다 치열한 경쟁 상태에 직면하고 있다. 이러한 건설산업 전반의 무한 경쟁에서 대응할 우수한 기술력과 체계적인 건설사업관리(CM)기법에 따른 안전관리가 필요한 실정이다. 따라서 CM단계별 안전관리지침이 시설물 life cycle 전단계에 걸쳐 활용되는 방안에 대해 연구하고 각 단계별 안전관리를 유도하여 안전성확보에 주력하며 각단계별 Safety management를 하고자 한다.
-
Human being can be divided into five elements in the Oriental Medicine. The remedy by using five elements constitution has been shown great effects clinically during that time. Therefore, The job design research considering Oriental Human Constitution is needed for job efficiency and safety. In This study, we examine whether the theory can be applied for job design through the experiment by 'Digital-type Speed Anticipation Reaction Tester' and suggest the desirable direction of job design.
-
In this study, it was researched a kind of the press machines which had been retained in the domestic press working companies. And then it was analysed the present conditions with the working types, the size of companies, the aging types and the continuous working periods. Specially, the purpose of this paper is decreased the industrial accidents of the domestic press working companies by the proposing the safe prevention which are obtained by the analysing the accidential reasons.
-
Recently, information systems(IS) outsourcing has become a very important management strategy of implementing IS and many studies on the IS outsourcing approach had been largely performed in the organizations, but it isn't still show how to outsource the IS functions and how to decide quantitative magnitude for judgement. To offer a quantitative decision model that can help practitioners set priority and reap the most benefits from outsourcing, we show outsourcing structure including 3 factors(strategic benefit, economic benefit and technological benefit) and sub-levels which. is different from the Yang and Huang's model. Also, we compute the weight of alternatives using analytic hierarchy process to find a priority of the IS outsourcing. As a result of analysis, we suggest systematic steps and quantitative model to increase the precision of decision making.
-
제품 설계 및 디자인의 과정이 고도로 높은 기술력을 바탕으로 이루어지고 있으며, 국내의 기업체도 우수한 기술력과 높은 품질로 경쟁력을 키우며 다양한 고객의 요구에 대응하여 고객만족을 꾀하여야 한다 이의 기반이 되는 제품의 품질과 사양은 설계에서 시작되는데 아직 국내의 많은 기업들은 설계 및 제작 단계에서 많은 시간과 비용을 낭비하고 있다. 3D Modeling Solution은 설계오류가 적으며 시각적인 설계를 할 수 있어 최소의 인력으로 제품을 설계할 수 있는 장점이 있지만 너무 많은 기능으로 인해 사용자가 쉽게 적용하고 사용하기 어려운 단점을 가지고 있다. 본 연구에서는 이러한 산업현장의 어려움을 덜기 위해 3D 전용 Modeling Solution에 사용자가 쉽게 부품을 조림할 수 있는 엔진을 접목시켜 누구나 사용가능하고 신속한 신제품 개발이 이루어지도록 하였다. 본 연구에서는 Autodesk사의 Inventor와 Microsoft Visual Basic으로 Inventor에서 제공하고 있는 API함수를 이용하여 조립자동화를 위한 조립조건 생성, 조립자동화, 부품 재질변경, 수동조립 그리고 부품의 DB화를 구현하였다. 이 프로그램은 조립조건 설정 폼을 이용하여 부품의 조립속성을 생성하고 부품조립 폼을 이용하여 조립자동화를 실행할 수 있도록 하였다. 또한 모든 부품을 Database화 하여 부품을 손쉽게 탐색할 수 있으며, 추후에도 언제든지 재사용이 가능하여 제품설계 효율성을 극대화 할 수 있다. 현장 적용 시 신속한 신제품 개발과 품질의 우수성으로 고객만족을 꾀할 수 있으며, 시간과 비용을 동시에 줄여 경쟁사와의 경쟁우위를 높이는 해결책이 될 수 있다.-110 마이크로프로세서와 21285 주제어기가 장착된 EBSA-285 보드이다. 측정하면서 수행하였다. 검증 결과 random 상태에서는 문헌자료에 부합되는 예측결과를 보여주었으나, intermediate와 constant 상태에서는 문헌보다 다소 낮은 속도를 보여주었다 이러한 속도차는 추후 현장 데이터를 수집하여 보다 실질적인 검증을 통하여 조정되어야 할 것으로 판단된다.지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.
-
The process of railway traffic planning is composed of several steps such as long - term, mid - term, short - term, and real - time plan. The planning of vehicle and manpower resources is a main research topic in tactical short - term planning step Railway vehicle is usually consisted of a power car, passenger/freight cars and human resource is composed of engine driver, cabin crew, ground personnel. So far , power car was main research target in railway vehicle scheduling problem. Recently according as the light electric railway or high - speed railway is introduced, the operational planning of train set vehicles become important . In this paper , we introduce the conceptional model for trainset restoring problem and developed heuristic algorithm.
-
The purpose of this study is to carry out comparative analysis of the differences between the trend of biometrics-related test St evaluation standardization in the world and that of Korea, and to suggest ideal directions and building plans for domestic biometrics industry. Its purpose also includes constructing promptly a standardization of domestics biometrics industry based on the suggested standards.
-
The Purpose of this study is to carry out comparative analysis of the differences between the trend of biometrics-related software standardization in the world and that of Korea, and to suggest ideal directions and building plans for domestic biometrics industry. Its purpose also includes constructing promptly a standardization of domestic biometrics industry based on the suggested standards.
-
One of the recent trends of cockpit development is to integrate (ore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration. module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. After that process, next-generation Automotive cockpit has been embodied as graphical image designing. Henceforth, applying this module to real will be considered after evaluation of utilization. This study is indicated that one example for evaluation of utilization.
-
An experiment was conducted to identify salient colours for information coding at electronic video displays. CRT and TFT-LCD were used to evaluate the effect of different types of electronic displays on the salience of colours. Total of 100 Subjects, 50 for each display were asked to select more salient 10 colours among 24 given colours. There was no statistically significant difference in the salience of colours between the two display types. The result showed that the tested colours could be clustered into 5 categories according to their brightness, saturation, and the number of R, G, B elements occupied to reproduce the colours. Three achromatic colours (black, white, grey) and eight chromatic colors (red, yellow, green, blue, cyan, orange, magenta, and indigo) were identified as the salient colours at the electronic video displays. The result also showed that the eight chromatic colours could be clustered into two distinct categories, landmark colours(red, yellow, green, and blue) and the other basic colours (cyan, magenta, orange, and indigo). It is noticeable that cyan, magenta, and indigo substituted for pink, purple, and brown that were recommended as the salient colours for the environment not using electronic video displays by the previous researches.
-
This study is to develop a device of bath-seat with massage which is attached to bath-seat and is able to sustain massage on perineal region and anus effectively. And also develop new programmed driving-seat that is able to protect drowsiness. This seat is operated easily by user controlling time period (eg. 30 minutes or 60 minutes) of vibration. During the vibration, user can make a choice of making n sound which is proved as a better effects for concentration and comfort.
-
Method of Total System Construction about Safety of Agriculture machine in Korea - Focused Tracter -In this paper, I analyzed the industrial system and agriculture system about safety between korea and australia. An agriculture which is one of the national security industry, has recognized the importance. International country have attention to the automatization of machine for the improvement of agriculture. However, because of modernization of agriculture, the rate of accurrence about agriculture accident has increased dramatically. Especially the rate of accurence of agricultural accident is higher than the other industrial accident in the developed country. Because of these reasons, developed country has efforted to the agriculture systemabout safety. Australia law for the safety system of agriculture is very well and the rate of accident in the self-management agriculture is included in the statistics of industrial but The rate of accident in self-management agriculture is very higher. Korea has many middle size factory to make new goods and factory accurre very many accident. Because Korea government research the theory and practical affairs for the industrial system about safety and health to protect industrial accident In future we have to try new method about Agriculture Safety of Korea.
-
It should be needed to realize a general system which make it possible to enjoy cyber tourism based on knowledge information system to recover a local potential growth power, catch a jumping chance again, and hold a new competitive power. But to discuss a tourism information system, the matters of hard ware, software and information mediating system should be reviewed generally, this research is likely to provide a cyber tourism information system through internet as a way of cyber tours through multimedia technology and stereoscopic image technique using geographic information system centering on the networking system of tourism information. Constructing
$\ulcorner$ cyber touristy city$\lrcorner$ on internet, foster a new industry, to go balanced with a present tourism industry and experience a virtual reality, various theme tours create high profit to shrunken tourism industry. Remark : multimedia technology, stereoscopic image, geographic information system -
This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for I-commerce applications to quickly incorporate new standards. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems.
-
This study investigated the management environment of medium and small business by examining the role of medium and small business in national economics, the change in management condition, and the problems in Qualify and technique. Also we analyzed problems in the past quality control activity of our medium and small business, and examined the driving direction and introduction method of QM. And to understand the effect of manager's concern in quality management to observe the quality system before and after introduction of QM. A target for this investigation is the medium and small business which has introduced QM through ISO 9000.
-
In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point.
-
The health industry is highly value-added, compared to other industries. The reason is that increase of income growth and the expanded human life expectancy bring about positively needs of products at health industry. This is related with increase in expenses of health care and R&D investment of health industry. After 1995, the share of GDP at drug & biomedical industry is increased. Especially, the share of GDP at biomedical is 0.12% in 1995 1
$^{st}$ quarter, but 0.17% in 2002 3$^{rd}$ quarter, 0.24% in 2008. Biomedical's contribution about GDP growth is to jump into 6.01% in 2008. The share of GDP at drug will continuously expand, compared to other manufacture industries. Also, drug's contribution about GDP growth will increase, compared with before. Conclusionally, total shares of GDP at drug St biomedical industry are to increase, compared with before. Also, this health industry's contribution is to expand as value-added industry and increase of sales. -
In general, manufacture of medicine has demerit of long period in investment effect, high risk, expensiveness through new drug development. At empirical test, R&D investment for new drug development positively affects on profit in manufacture of medicine. In Korea, effect on R&D investment in manufacture of medicine occur faster than previous period. Manufacture of medicine is value added industry, compared to other industries. Moreover, U.S & Japan in R&D expenditure on sales respectively has 10.1%, 8.07%. This is 3-4 times, compared to R&D expenditure on sales of Korea. Conclusionally, the importance of R&D investment increase more and more in future. So, manufacture of medicine and Companies related this will care for R&D investment.
-
The drug industry of China is faster than before, so it will rank 5
$^{th}$ at world-wide markets in 2010. This is because of expansion of purchase power on increase in economic growth, extended human life expectancy. As it is entered the WTO in January 2002, it will positively affect on export of Korea for China. This paper focuses on the analysis of export increase caused by reduction of custom tariff in China. The time schedule on average reduction of custom tariff is 15% in 2000, 10% in 2005, 5% in 2010. As the empirical test, it presents 8.48% export increase rate for China of Korea on reduction of custom tariff. -
EPC seeks to minimize variability by transferring the output variable to a related process input(controllable) variable, while SPC seeks to reduce variability by detecting and eliminating assignable causes of variation. Tn the case of product control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We consider an alternative EPC model with second-order autoregressed disturbance. We compare three control systems; EPC, EPC combined system with EWMA, CUSUM and Shewhart. This paper shows through simulation that the performance of the integrated model of EPC and SPC is more preferable than that of EPC.
-
There is only one server available and arriving work require services from this server. Job are processed by the machine one at a time. The most common objective is to sequence jobs on the severs so as to minimize the penalty for being late, commonly called tardiness penalty Based on other objectives, many criteria may serve as s basis for developing job schedules. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem and reducing inventory, product development time, cycle time, and order lead time.
-
In fact, some cases that successfully introduced CRM show that CRM is migrating from small scale which is typical when introduced to larger scale through various tests. The process also comprises all strategic planning, capital investments, management decisions, and tasks necessary to create a new product. manufacturing processes must be created so that the product can be produced in the product facility Therefore, this study tries to segment customer for the sieving the problem. And it make efficient customer management.
-
Manufacturing companies must possess a new type of production system with characteristics of reconfigurability, reusability and scalability (Dove 1995), i.e. an agile manufacturing system. Such system will allow flexibility not only in producing a variety of part, but also in changing the system itself, which is a difference form flexible manufacturing systems. A fundamental early step in the reconfiguring process for agile manufacturing system is to develop a model that adequately describes the proposed systems, in order to be able to study and evaluate the impact of the reconfiguring decision on the system performance, before its construction. Therefore, in this paper, an Object & Knowledge-based Interval Timed Petri-Net (OKITPN) approach is proposed.