• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.31-33
• /
• 2007

In this paper, a simple digital control scheme for the single/parallel module buck converters is proposed using a digital state feedback control method. The discrete state feedback controller structure for the robust tracking control is derived by using the error state. The proposed control system can precisely achieve the interleaved current sharing and the output regulation, and can achieve the systematical controller design for a given converter specification using the pole placement technique. For a design example, the single module buck converter is simulated using the MATLAB Simulink software and two 100W parallel module buck converters with a TMS320F2812 DSP is implemented.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1327-1334
• /
• 1999

The stabilization control of ball-beam system is difficult because of its nonlinearity and structural unstability. Futhermore, a series of classical methods such as the PID and the full state feedback controller(FSFC) based on the local linearizations have narrow stabilizable regions. At the same time, the fine tunings of their gain parameters are also troublesome. Therefore, in this paper, three improved design techniques of stabilization controller for a ball-beam system were proposed. These parameter tuning methods in the double PID controller(DPIDC), the FSFC and the a sliding mode controller(SMC) were dependent upon the Real Value Elitist Genetic Algorithm (RVEGA). Finally, by applying the DPIDC, the FSFC and the Real Variable Elitist Genetic Algorithm based Sliding Mode Control(RVEGA SMC) to the stabilizations of a ball-beam system, the performances of the RVEGA SMC technique were showed to be superior to those of two other type controllers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.398-403
• /
• 1998

This paper describes a controller design for the stator reactive power generator in the transmission system. The controller of static reactive power generator was designed using a mathematical model and non-linear state feedback. The performance of controller was verified using computer simulation with EMTP code and experimental work with scaled-model. The dynamic interaction with a simple power system was also analyzed using both the simulation model and hardware scaled-model. Both simulation and experimental results prove that the controller using PI block and non-linear state feedback offers better performance than the controller using PI block only.

• 한국지능시스템학회논문지
• /
• 제20권6호
• /
• pp.768-773
• /
• 2010

본 논문에서는 도립진자 시스템을 이용한 최적 상태 되먹임 제어기 설계 및 성능 검증을 소개한다. 제안하고 있는 최적 상태 되먹임 제어기는 최적제어 이론을 기반으로 입력크기와 응답성능의 최적값을 고려하였고 뿐만 아니라, 적분제어기법을 도입함으로써 정상상태오차를 줄이도록 하였다. 실험에 사용된 도립진자 시스템은 (주)셈웨어의 PC기반 CEM-IP-01으로써 제안된 제어기를 적용한다. 마지막으로 제안된 제어기와 일반 상태 되먹임 제어기를 모의실험과 실험을 통하여 비교함으로써 제안된 제어기의 성능을 검증한다.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.86-92
• /
• 1998

This paper deals with an output feedback H control problem for linear time ivariant systems with state delay. The proposed output feedback controller is represented by the lower linear fractional transformation of alinear time invariant system and a delay operator. Sufficient conditions for the existence of the output feedback controller are given in the form of linear matrix inequalities which are less conservative than those for the existence of a rational output feedback controler. We also present a numerical example to demonstrate the efficacy of the proposed method.of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2480-2482
• /
• 2005

This paper presents a complete solution to intelligent digital redesign problem (IDR) for sampled-data fuzzy systems. The IDR problem is the problem of designing a sampled-data state feedback controller such that the sampled-data fuzzy system is equivalent to the continuous-time fuzzy system in the sense of the state matching. Its solution is simply obtained by linear transformation. Under the proposed sampled-data controller, the states of the discrete-time model of the sampled-data fuzzy system completely matches the state of the discrete-time model of the closed-loop continuous-time fuzzy systems are completely matched at every sampling points.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.332-335
• /
• 1997

In the industrial motor drive system, a shift torsional vibration si often generated when a motor and a load are connected with a flexible shaft. This paper treats the vibration suppression control of such a system. In this paper, the state feedback controller of the two-mass resonant system using the H$\infty$ filter is proposed. The H$\infty$ filter is robust in noise and disturbance. Simulation results show the validity proposed controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.665-666
• /
• 2009

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.70-71
• /
• 2007

This paper presents an application of LQR(Linear Quadratic Regulator) for experimental control moment gyroscope. To be specific, mathematical model is first derived based on the quaternion and Lagrange's equation, state feedback controller using LQR scheme is designed, and to show the stability of the scheme, experimental results are given.

• 제어로봇시스템학회논문지
• /
• 제20권6호
• /
• pp.641-646
• /
• 2014

In this paper, we propose a controller for a ball and beam system which reduces the measurement error effect under AC and DC noise. The ball and beam system measures data through a sensor. If sensor noise is included in a controller via the feedback channel, the signal is distorted and the entire system cannot work normally. Therefore, some appropriate action for the measurement error effect is essential in the controller design. Our controller is equipped with a gain-scaling factor and a compensator to reduce the effect of measurement error in the feedback signal. Effectively, our proposed controller can reduce the AC and DC noise of a feedback sensor. We analyze the proposed controller by Laplace transform technique and illustrate the improved control performance via an experiment for a ball and beam system.