• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.430-431
• /
• 2006

This letter reports the fabrication of polycrystalline silicon thin-film transistors (poly-Si TFT) on flexible plastic substrates using amorphous silicon (a-Si) precursor films by sputter deposition. The a-Si films were deposited with mixture gas of argon and helium to minimize the argon incorporation into the film. The precursor films were then laser crystallized using XeCl excimer laser irradiation and a four-mask-processed poly-Si TFTs were fabricated with fully self-aligned top gate structure.

• Information Display
• /
• v.5 no.1
• /
• pp.25-30
• /
• 2004

Poly-Si TFT(Thin Film Transistor) technology are reviewed and discussed. Poly-Si TFTs fabricated on glass using low-temperature process were studied extensively for the application to LCD (Liquid Crystal Display) as well as to OLED(Organic Light Emitting Diode) Display. Currently, one of the application targets of the poly-Si TFT is emphasized on the highly functional SOG(System on Glass). Improvement of device characteristics such as an enhancement of carrier mobility has been studied intensively by enlarging the grain size. Reduction of the voltage and shrinkage of the device size are the trend of AM FPD(Active Matrix Flat Panel Display) as well as of Si LSI, which will arise a peculiar issue of uniformity for the device performance. Some approaches such as nucleation control of the grain seed or lateral grain growth have been tried, so far.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.445-446
• /
• 2005

This letter reports the fabrication of polycrystalline silicon thin-film transistors (poly-Si TFT) on flexible plastic substrates using amorphous silicon (a-Si) precursor films by sputter deposition. The a-Si films were deposited with mixture gas of argon and helium to minimize the argon incorporation into the film. The precursor films were then laser crystallized using XeCl excimer laser irradiation and a four-mask-processed poly-Si TFTs were fabricated with fully self-aligned top gate structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.62-63
• /
• 2006

In this paper, the characteristics of polycrystalline silicon thin-film transistors (poly-Si TFTs) fabricated on polymer substrates are investigated. The a-Si films was laser annealed by using a XeCl excimer laser and a four-mask-processed poly-Si TFT was fabricated with fully self-aligned top gate structure. The fabricated nMOS TFT showed field-effect mobility of $30cm2/V{\cdot}s$, on/off ratio of 105 and threshold voltage of 5 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.169-172
• /
• 2000

A-Si:H and poly-Si TFT characteristics were investigated using an inverted staggered type TFT. The poly-Si films were achieved by various anneal techniques ; isothermal, RTA, and excimer laser anneal. The TFT on as-grown a-Si:H exhibited a low field effect mobility, transconductance, and high gate threshold voltage. Some films were annealed at temperatures from $200^{\circ}C$ to $1000^{\circ}C$. The TFT on poly-Si showed an improved $I_{on}/I_{off}$ ratio of $10^6$, reduced gate threshold voltage, and increased field effect mobility by three orders. Inverter operation was examined to verify logic circuit application using the poly-Si TFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.501-504
• /
• 2006

The Process technology for uniform SLS poly-Si and performance enhancement of furnace activated poly-Si TFTs are reported. By strictly optimizing SLS optics, threshold voltage variation in pixel TFTs was remarkably decreased and the non-uniformity such as SLS shot mark was removed. Optimized doping process for low sheet resistance and passivation annealing are critical for the enhancement of device performances.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.470-470
• /
• 2013

Recently, active materials such as amorphous silicon (a-Si), poly crystalline silicon (poly-Si), transition metal oxide semiconductors (TMO), and organic semiconductors have been demonstrated for flexible electronics. In order to apply flexible devices on the polymer substrates, all layers should require the characteristic of flexibility as well as the low temperature process. Especially, pentacene thin film transistors (TFTs) have been investigated for probable use in low-cost, large-area, flexible electronic applications such as radio frequency identification (RFID) tags, smart cards, display backplane driver circuits, and sensors. Since pentacene TFTs were studied, their electrical characteristics with varying single variable such as strain, humidity, and temperature have been reported by various groups, which must preferentially be performed in the flexible electronics. For example, the channel mobility of pentacene organic TFTs mainly led to change in device performance under mechanical deformation. While some electrical characteristics like carrier mobility and concentration of organic TFTs were significantly changed at the different temperature. However, there is no study concerning multivariable. Devices actually worked in many different kinds of the environment such as thermal, light, mechanical bending, humidity and various gases. For commercialization, not fewer than two variables of mechanism analysis have to be investigated. Analyzing the phenomenon of shifted characteristics under the change of multivariable may be able to be the importance with developing improved dielectric and encapsulation layer materials. In this study, we have fabricated flexible pentacene TFTs on polymer substrates and observed electrical characteristics of pentacene TFTs exposed to tensile and compressive strains at the different values of temperature like room temperature (RT), 40, 50, $60^{\circ}C$. Effects of bending and heating on the device performance of pentacene TFT will be discussed in detail.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.1
• /
• pp.20-28
• /
• 2003

In this paper, we present results of the comparative analysis of the flicker phenomena in the poly-Si TFT-LCD and a-Si:H TFT-LCD arrays for the development and manufacturing of wide-area and high-quality TFT-LCD displays. We used four different types of TFTs; a-Si:H TFT, excimer laser annealed (ELA) poly-Si TFT, silicide mediated crystallization (SMC) poly-Si TFT, and counter-doped lateral body terminal (LBT), poly-Si TFT. We defined the electrical quantity of the flicker so that we could compare the flickers quantitatively for four different 40" UXGA TFT-LCDs. We identify three factors contributing to the flicker, such as charging time, kickback voltage and leakage current, and analyze how much each of three factors give rise to the flincker in the different TFT-LCD arrays. In addition, we suggest and show that, in the case of the poly-Si TFT-LCD arrays, the low-level (minimum) gate voltages should be carefully chosen to minimize the flicker because of their larger leakage currents compared with a-Si TFT-LCD arrays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.307-309
• /
• 2005

We investigated light absorption layer effect on metal-induced lateral crystallization (MILC) growth rate and MILC thin films transistors (TFTs). As annealing method, we used scanning-rapid thermal annealing (RTA). MILC growth rate which was crystallized by light absorption layer and using scanning-RTA was 3 times than normal MILC which was without light absorption layer growth rate. Also we compared MILC TFTs characteristics which were combined to light absorption layer with conventional MILC TFTs. After scanning-RTA process, MILC-TFTs which were with light absorption layer were superior to conventional MILC-TFTs. With this new MILC-TFTs structure, we could reduced crystallization time and obtain good electrical properties.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.166-171
• /
• 2016

Nickel silicide is main issue in Polycrystalline silicon Thin Film Transistor (TFT) which is made by Metal Induced Lateral Crystallization (MILC) method. This Nickel silicide acts as a defect center, and this defect is one of the biggest reason of the high leakage current. In this research, we fabricated polycrystalline TFTs with novel method called Edge Cut (EC). With this new fabrication method, we assumed that nickel silicide at the edge of the channel region is reduced. Electrical properties are measured and trap state density also calculated using Levinson & Proano method.