• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.17-20
• /
• 2001

Nonvolatile semiconductor memory devices with reoxidized nitrided oxide(RONO) gate dielectric were fabricated, and nitrogen distribution and bonding species which contributing memory characteristics were analyzed. Also, memory characteristics of devices according to anneal temperatures were investigated. The devices were fabricated by 0.35$\mu\textrm{m}$ retrograde twin well CMOS processes. The processes could be simple by in-situ process of nitridation anneal and reoxidation. The nitrogen distribution and bonding state of gate dielectric were investigated by Dynamic Secondary Ion Mass Spectrometry(D-SIMS), Time-of-Flight Secondary ton Mass Spectrometry(ToF-SIMS), and X-ray Photoelectron Spectroscopy(XPS). Nitrogen concentrations are proportional to nitridation anneal temperatures and the more time was required to form the same reoxidized layer thickness. ToF-SIMS results show that SiON species are detected at the initial oxide interface and Si$_2$NO species near the new Si-SiO$_2$ interface that formed after reoxidation. As the anneal temperatures increased, the device showed worse retention and degradation properties. These could be said that nitrogen concentration near initial interface is limited to a certain quantity, so excess nitrogen are redistributed near the Si-SiO$_2$ interface and contributed to electron trap generation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.180-184
• /
• 2002

In this paper, the electrical properties of PVD Ta and $TaN_x$ gate electrodes on $SiO_2$ and their thermal stabilities are investigated. The results show that the work functions of $TaN_x$ gate electrode are modified by the amount of N, which is controlled by the flow rate of $N_2$during reactive sputtering process. The thermal stability of Ta and $TaN_x$ with RTO-grown $SiO_2$ gate dielectrics is examined by changes in equivalent oxide thickness (EOT), flat-band voltage ($V_{FB}$), and leakage current after post-metallization anneal at high temperature in $N_2$ambient. For a Ta gate electrode, the observed decrease in EOT and leakage current is due to the formation of a Ta-incorporated high-K layer during the high temperature annealing. Less change in EOT and leakage current is observed for $TaN_x$ gate electrode. It is also shown that the frequency dispersion and hysteresis of high frequency CV curves are improved significantly by a post-metallization anneal.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.10-17
• /
• 2009

Nano-Electro-Mechanical MOSFET (NEMFET) using Double-Gate MOSFET (DGMOS) structure can efficiently control the short channel effect. Espatially, subthreshold current of depletion-mode Double-Gate NEMFET (Dep-DGNEMFET) decreases in the off-state due to the thin equivalent-oxide thickness. Analytical $t_gap$ vs. $V_g$ equation for Dep-DGNEMFET is derived and characteristics for different device structures are analyzed. Dep-DGNEMFET structure is optimized to satisfy ITRS criteria.

• Journal of the Korean Ceramic Society
• /
• v.31 no.1
• /
• pp.74-78
• /
• 1994

Degradation of thin oxide by doped poly-Si and its improvement were studied. The gate oxide can be degraded by phosphorous in poly-Si doped POCl3. The degradation is increased with the decrement of sheet resistance and poly-Si thickness. Oxide failures of amorphous-Si are higher than those of poly-Si. In-situ double deposition of amorphous-Si, 54$0^{\circ}C$/30 nm, and poly-Si, 6$25^{\circ}C$/220 nm, forms the mismatch structure of grain boundary between amorphous-Si and poly-Si, and suppresses the excess phosphorous on oxide surface by the mismatch structure. The control of phosphorous through grain boundary improves the oxide reliability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.881-883
• /
• 2005

In case is below length 100nm of gate, various kinds problem can be happened with by threshold voltage change of device, occurrence of leakage current by tunneling because thickness of oxide by 1.5nm low scaling is done and doping concentration is increased. SiO$_2$ dielectric substance can not be used for gate insulator because is expected that tunneling current become 1A/cm$^2$ in 1.5nm thickness low. In this paper, devised double gate MOSFET(DGMOSFET) to decrease effect of leakage current by this tunneling. Therefore, could decrease effect of these leakage current in thickness 1nm low of SiO$_2$ dielectric substance. But, very big gate insulator of permittivity should be developed for develop device of nano scale.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.738-742
• /
• 2011

This paper has studied drain induced barrier lowering(DIBL) for Double Gate MOSFET(DGMOSFET) using analytical potential model. Two dimensional analytical potential model has been presented for symmetrical DGMOSFETs with process parameters. DIBL is very important short channel effects(SCEs) for nano structures since drain voltage has influenced on source potential distribution due to reduction of channel length. DIBL has to be small with decrease of channel length, but it increases with decrease of channel length due to SCEs. This potential model is used to obtain the change of DIBL for DGMOSFET correlated to channel doping profiles. Also device parameters including channel length, channel thickness, gate oxide thickness and doping intensity have been used to analyze DIBL.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.285-291
• /
• 2013

In this paper, MOS-Capacitor and MOSFET devices with a Low Level Leakage Current of oxide thickness, channel width and length respectively were to investigate the reliability characterizations mechanism of ultra thin gate oxide films. These stress induced leakage current means leakage current caused by stress voltage. The low level leakage current in stress and transient current of thin silicon oxide films during and after low voltage has been studied from strss bias condition respectively. The stress channel currents through an oxide measured during application of constant gate voltage and the transient channel currents through the oxide measured after application of constant gate voltage. The study have been the determination of the physical processes taking place in the oxides during the low level leakage current in stress and transient current by stress bias and the use of the knowledge of the physical processes for driving operation reliability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.6
• /
• pp.32-37
• /
• 2003

In this paper, the trap characteristics of thin silicon oxides is investigated in the ULSI implementation with nano structure transistors. The stress and transient currents associated with the on and off time of applied voltage were used to measure the distribution of high voltage stress induced traps in thin silicon oxide films. The stress and transient currents were due to the charging and discharging of traps generated by high stress voltage in the silicon oxides. The transient current was caused by the tunnel charging and discharging of the stress generated traps nearby two interfaces. The stress induced leakage current will affect data retention in electrically erasable programmable read only memories. The oxide current for the thickness dependence of stress current, transient current, and stress induced leakage currents has been measured in oxides with thicknesses between 113.4nm and 814nm, which have the gate area 10$\^$-3/ $\textrm{cm}^2$. The stress induced leakage currents will affect data retention, and the stress current and transient current is used to estimate to fundamental limitations on oxide thicknesses.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.359-365
• /
• 2007

In this paper we present a bottom-gate type of zinc oxide (ZnO) and Gallium (Ga) doped zinc oxide (GZO) based thin film transistors (TFTs) through applying a radio frequency (RF) magnetron sputtering method at room temperature. The gate leakage current can be reduced up to several ph by applying $SiO_2$ thermally grown instead of using new gate oxide materials. The root mean square (RMS) values of the ZnO and GZO film surface were measured as 1.07 nm and 1.65 nm, respectively. Also, the transmittances of the ZnO and GZO film were more than 80% and 75%, respectively, and they were changed as their film thickness. The ZnO and GZO film had a wurtzite structure that was arranged well as a (002) orientation. The ZnO TFT had a threshold voltage of 2.5 V, a field effect mobility of $0.027\;cm^2/(V{\cdot}s)$, a on/off ratio of $10^4$, a gate voltage swing of 17 V/decade and it operated in a enhancement mode. In case of the GZO TFT, it operated in a depletion mode with a threshold voltage of -3.4 V, a field effect mobility of $0.023\;cm^2/(V{\cdot}s)$, a on/off ratio of $2{\times}10^4$ and a gate voltage swing of 3.3 V/decade. We successfully demonstrated that the TFTs with the enhancement and depletion mode type can be fabricated by using pure ZnO and 1wt% Ga-doped ZnO.