• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권10호
• /
• pp.479-485
• /
• 2001

In this paper, we introduce a charge pump phase-locked loop (PLL) architecture which employs a precharge phase frequency detector (PFD) and a sequential PFD to achieve a high frequency operation and a fast acquisition. Operation frequency is increased by using the precharge PFD when the phase difference is within $-{\pi}{\sim}{\pi}$ and acquisition time is shortened by using the sequential PFD and the increased charge pump current when the phase difference is larger than ${\pm}{\pi}$. So error detection range of the proposed PLL structure is not limited to $-{\pi}{\sim}{\pi}$ and a high frequency operation and a higher speed lock-up time can be achieved. The proposed PLL was designed using 1.5 ${\mu}m$ CMOS technology with 5V supply voltage to verify the lock in process. The proposed PLL shows successful acquisition for 200 MHz input frequency. On the other hand, the conventional PLL with the sequential PFD cannot operate at up to 160MHz. Moreover, the lock-up time is drastically reduced from 7.0 ${\mu}s\;to\;2.0\;{\mu}s$ only if the loop bandwidth to input frequency ratio is regulated by the divide-by-4 counter during the acquisition process. By virtue of this dual PFDs, the proposed PLL structure can improve the trade-off between acquisition behavior and locked behavior.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1132-1135
• /
• 2002

In this paper, we propose a phase-locked loop (PLL) with dual loops in which advantages of both loops can be combined. Frequency-locked loop (FLL) which is composed of two frequency-to-voltage converters (FVC) and an amplifier makes the frequency synchronize very fast and output signal is synchronized in phase with the input reference signal by charge pump PLL. This structure can improve the trade-off between acquisition behavior and locked behavior.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권2호
• /
• pp.152-156
• /
• 2013

This paper presents a fast-lock dual-loop successive approximation register-controlled duty-cycle corrector (SARDCC) circuit using a mixed (binary+sequential) search algorithm. A wider duty-cycle correction range, higher operating frequency, and higher duty-cycle correction accuracy have been achieved by utilizing the dual-loop architecture and the binary search SAR that achieves the fast duty-cycle correcting property. By transforming the binary search SAR into a sequential search counter after the first DCC lock-in, the proposed dual-loop SARDCC keeps the closed-loop characteristic and tracks variations in process, voltage, and temperature (PVT). The measured duty cycle error is less than ${\pm}0.86%$ for a wide input duty-cycle range of 15-85 % over a wide frequency range of 0.5-2.0 GHz. The proposed dual-loop SARDCC is fabricated in a 0.18-${\mu}m$, 1.8-V CMOS process and occupies an active area of $0.075mm^2$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2625-2628
• /
• 2003

Phase locked loops are widely used in many applications such as frequency synthesis, clock/data recovery and clock generation. In nearly all the PLL applications, low jitter and fast locking time is required. Without using adaptive loop filter, this paper proposes very simple method for improving locking time and jitter reduction simultaneously in charge pump PLL(CPPLL) using Daul Phase/Frequency Detector(Dual PFD). Based on the proposed scheme, the lock time is improved by 23.1％, and the jitter is reduced by 45.2％ compared with typical CPPLL.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.21-29
• /
• 2005

The Purpose of this study was to seek determinant factors through analysis of 65 snatch skill kinematic factors of Athletics participated in 2001 Asian weightlifting competetion. The conclusion were as follows ; 1. In order to enhance snatch skill, when barbell move on knee position, One should be flex knee joint to 105-110 degree, and In pull motion, One should be move powerful extension of knee and hip joint. 2. In last pull motion, One try to make more lock out motion than extra extention motion of hip joint 3. In order to enhance snatch skill, It is inportant that elevate barbell highly by last pull motion through powerful knee extention, poweful hip flextion and One should be make lock out motion fast in the same time. 4. In order to enhance snatch skill, anterior-posterior movement width of shoulder joint should be small. 5. In order to enhance snatch skill, Hip joint should be move vertically on start and lock out phase, but In pull phase, extension motion of hip joint shoulde be performed more largely and powerfully.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.387-394
• /
• 2016

This paper presents a fully digital delay locked loop (DLL) that can acquire lock in four clock cycles with a resolution of a 1/4 NAND-delay. The proposed DLL with a multi-dither-free phase detector acquires the initial lock in four clock cycles with 1/2 NAND-delay. Then, it utilizes a multi-dither-free phase detector, a region accumulator, and phase blenders, to improve the resolution to a 1/4 NAND-delay. The region accumulator which continuously steers the control registers and the phase blender, adaptively controls the tracking bandwidth depending on the amount of jitter, and effectively suppresses the dithering jitter. Fabricated in a 65 nm CMOS process, the proposed DLL occupies $0.0432mm^2$, and consumes 3.7 mW from a 1.2-V supply at 2 GHz.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.1081-1082
• /
• 2005

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.339-344
• /
• 2017

본 논문에서는 Early-late detector, Duty-rate modulator, 그리고 LSI(Lock Status Indicator)를 사용하여 작은 크기와 빠른 위상고정 시간을 갖는 위상고정루프를 제안하였다. 제안된 위상고정루프는 작은 용량을 가진 하나의 커패시터를 사용하게 됨으로써 칩의 크기를 결정하는 루프필터의 크기가 작아지게 되어 크기를 최소화 하였다. 기존의 전하펌프와 달리 2개의 전하펌프를 사용하여 하나의 커패시터를 사용하더라도 2차 루프필터를 사용 한 것과 같은 전압파형을 만들어 줌으로써 위상을 고정시킬 수 있다. 2개의 전하펌프는 UP, DN신호 위상의 빠르기를 감지해주는 Early-late detector와 일정한 비율의 파형을 만들어주는 Duty-rate modulator에 의해 제어된다. LSI회로를 사용함으로써 빠른 위상고정시간을 얻을 수 있다. 제안된 위상고정루프는 1.8V $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였고, Hspice 시뮬레이션을 통해 회로의 동작을 검증하였다.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.258-264
• /
• 2011

본 논문은 GSM(Global System for Mobile communications)에서 주로 사용되는 Offset-PLL(Phase Locked Loop) 방식을 사용하여 낮은 위상 잡음과 빠른 위상 고정 시간, 우수한 불요파 특성을 갖는 주파수 합성기를 설계 제작하였다. 제안된 주파수 합성기의 구조는 3번의 주파수 하향 변환을 통해 낮은 위상 잡음 갖도록 하였으며, 높은 주파수 해상도를 갖도록 세 개의 offset 주파수중 최종 offset 주파수를 DDS(Direct Digital Synthesizer)를 이용하여 생성하였다. 또한, 빠른 스위칭 속도를 가질 수 있도록 DAC(Digital to Analog Converter)를 사용하였다. DAC 사용에 따른 위상 잡음 열화를 줄이기 위해 DAC 노이즈 제거를 위한 필터를 설계하여 성능을 개선하였다.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1558-1563
• /
• 2007

논문은 fractional-N 방식의 주파수 합성기(PLL)를 낮은 차수의 ${\Delta}{\Sigma}$변조기로 더욱 높은 성능의 PLL로 설계하기 위하여 대역폭 가변 방식의 PLL과 ${\Delta}{\Sigma}$방식의 fractional-N PLL의 구조를 합성한 새로운 방식의 PLL을 제안한다. Matla으로 대역폭 가변을 이용한 ${\Delta}{\Sigma}$방식의 fractional-N PLL의 시뮬레이션을 수행하여 제안된 구조의 특성을 관찰하였다. 본 논문의 대역폭 가변 PLL은 HSPICE 0.35um CMOS 공정을 이용하여 시뮬레이션 하였고, 그 결과 제안된 PLL은 빠른 록이 가능하고 fractional spur를 20dB 정도 낮출 수 있었다.