• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.164-169
• /
• 2014

We investigated the etching characteristics of $HfAlO_3$ thin films in $O_2/Cl_2/Ar$ and $O_2/BCl_3/Ar$ gas, using a high-density plasma (HDP) system. The etch rates of the $HfAlO_3$ thin film obtained were 30.1 nm/min and 36 nm/min in the $O_2/Cl_2/Ar$ (3:4:16 sccm) and $O_2/BCl_3/Ar$ (3:4:16 sccm) gas mixtures, respectively. At the same time, the etch rate was measured as a function of the etching parameter, namely as the process pressure. The chemical states on the surface of the etched $HfAlO_3$ thin films were investigated by X-ray photoelectron spectroscopy. Auger electron spectroscopy was used for elemental analysis on the surface of the etched $HfAlO_3$ thin films. These surface analyses confirm that the surface of the etched $HfAlO_3$ thin film is formed with nonvolatile by-product. Also, Cl-O can protect the sidewall due to additional $O_2$.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.287-291
• /
• 2012

We investigated the etching characteristics of TaN thin films in an $O_2/BCl_3/Cl_2/Ar$ gas using a high density plasma (HDP) system. A maximum etch rate of the TaN thin films and the selectivity of TaN to $SiO_2$ were obtained as 172.7 nm/min and 6.27 in the $O_2/BCl_3/Cl_2/Ar$ (3:2:18:10 sccm) gas mixture, respectively. At the same time, the etch rate was measured as a function of the etching parameters, such as the RF power, DC-bias voltage, and process pressure. The chemical states on the surface of the etched TaN thin films were investigated using X-ray photoelectron spectroscopy. Auger electron spectroscopy was used for elemental analysis on the surface of the etched TaN thin films. These surface analyses confirm that the surface of the etched TaN thin film is formed with the nonvolatile by-product.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.1-7
• /
• 2001

This paper investigates the characteristics of a newly developed high density hollow cathode plasma(HCP) system and its application for the etching of silicon wafers. We used $SF_6$ and $O_2$ gases in the HCP dry etch process. This paper demonstrates very high plasma density of $2{\times}10^{12}cm^{-3}$ at a discharge current of 20 rna, Silicon etch rate of 1.3 ${\mu}m$/min was achieved with $SF_6/O_2$ plasma conditions of total gas pressure of 50 mTorr, gas flow rate of 40 seem, and RF power of200W. This paper presents surface etching characteristics on a crystalline silicon wafer and large area cast type multicrystlline silicon wafer. We obtained field emitter tips size of less than 0.1 ${\mu}m$ without any photomask step as well as with a conventional photolithography. Our experimental results can be applied to various display systems such as thin film growth and etching for TFT-LCDs, emitter tip formations for FEDs, and bright plasma discharge for PDP applications. In this research, we studied silicon etching properties by using the hollow cathode plasma system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.187-190
• /
• 2004

In this work, we investigated etching characteristics and mechanism of BST thin films using $Cl_2$/Ar, $CF_4/Cl_2$/Ar and $BCl_3/Cl_2$/Ar gas mixtures using inductively coupled plasma (ICP) system. A chemically assisted physical etch of BST was experimentally confirmed by ICP under various gas mixtures. The etch rate of the BST thin films had a maximum value at 20 $BCl_3$ and 10% $CF_4$ gas concentration, and decreased with further addition of $BCl_3$ or $CF_4$ gas, because $BaCl_x$, $SrCl_x$, $BaF_x$ and $SrF_x$ compounds have higher melting and boiling points. The maximum etch rate of the BST thin films was 57nm/min at the 30% $Cl_2(Cl_2+Ar)$. The characteristics of the plasma were analyzed by using OES and Langmuir probe.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.46-50
• /
• 2005

BST thin films were etched with inductively coupled CF$_{4}$/(Cl$_{2}$+Ar) plasmas. The etch characteristics of BST thin films as a function of CF$_{4}$/(Cl$_{2}$+Ar) gas mixtures were analyzed using optical emission spectroscopy (OES) and Langmuir probe. The BST films in CF$_{4}$/Cl$_{2}$/Ar plasma is mainly etched by the formation of metal chlorides which depends on the emission intensity of the atomic Cl and the bombarding ion energy. The maximum etch rate of the BST thin films was 53.6 nm/min because small addition of CF$_{4}$ to the Cl$_{2}$/Ar mixture increased chemical and physical effect. A more fast etch rate of BST films can be obtained by increasing the DC bias and the RF power, and lowering the working pressure.

• Transactions on Electrical and Electronic Materials
• /
• 제14권6호
• /
• pp.304-307
• /
• 2013

Reverse engineering of semiconductor devices utilizes delayering processes, in order to identify how the interconnection lines are stacked over transistor gates. Cu metal has been used in recent fabrication technologies, and de-processes becomes more difficult with the shrinking device dimensions. In this article, reverse engineering technologies to reveal the Cu interconnection lines and Cu via-plugs embedded in dielectric layers are investigated. Stacked dielectric layers are removed by $CF_4$ plasma etching, then the exposed planar Cu metal lines and via-plugs are selectively delineated by wet chemical solution, instead of the commonly used plasma-based dry etch. As a result, we have been successful in extracting the layouts of multiple layers within a system IC, and this technique can be applicable to other logic IC, analog IC, and CMOS IC, etc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1269-1271
• /
• 2008

We find some array mura are caused by S/D bridge or channel open in 4 mask process. The gray tone PR thickness non-uniformity is the main reason of these defects. By the adjustment of exposure and dry etch parameters, S/D bridge and channel open ratio drops by 10.87%.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1271-1276
• /
• 2004

Two-dimensionally arrayed nanocolumn lattices were fabricated by using double-exposure laser holographic method. The hexagonal lattice was formed by rotating the sample with 60 degree while the square lattice by 90 degree before the second laser-exposure. The reactive ion etching for a typical time of 30 min using CH$_4$/H$_2$ plasma enhanced the aspect-ratio by more than 1.5 with a slight increase of the bottom width of columns. The etch-damage was observed by photoluminescence (PL) spectroscopy which was removed by the wet chemical etching using HBr/$H_2O$$_2$/$H_2O$ solution, leading into the enhanced PL intensities of the PCs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.383-383
• /
• 2010

TiN is one of the mostly used barrier materials in copper metallization because of low friction coefficient and superior electrical properties. We need to investigate for the etching characteristic of TiN. In this study, we investigated about etching characteristic of TiN using $BCl_3$/Ar inductively coupled plasma system. The etch rate was measured by a depth pro filer. The chemical etching reactions of the TiN surface was investigated X-ray photoelectron spectroscopy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1977-1979
• /
• 1996

Single-crystaIline silicon diaphgrams and features are fabricated without using an etch stop process. The process involves vertical dry etching, double-sided alignment, followed by wet-chemical etching from the back side. The abvantages of this process are that $5{\sim}50{\mu}m$ diaphgrams and features can be fabricated accurately and inexpensively. In addition, since no impurity-based process is introduced, highly uniform and homogenous properties can be achieved