• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.98-102
• /
• 2011

This paper describes inverse E class frequency multiplier which is lower inductance and peak switching voltage than E class frequency multiplier. The frequency multiplier is designed to generate 5.8[GHz] frequency by doubling the input frequency 2.9[GHz]. The peak switching voltage of designed inverse E class frequency multiplier with 11[V] is lower 4[V] than that of E class frequency multiplier with 15[V]. The inverse E class frequency multiplier has a conversion gain 6[dB] at output power 21[dBm] and maximum 35[%] power efficiency.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.8
• /
• pp.416-422
• /
• 2006

With the increasing demand for renewable energy, distributed power included in fuel cells have been studied and developed as a future energy source. For this system, a power conversion circuit is necessary to interface the generated power to the utility. In many cases, a high step-up dc/dc converter is needed to boost low input voltage to high voltage output. Conventional methods using cascade dc/dc converters cause extra complexity and higher cost. The conventional topologies to get high output voltage use flyback dc/dc converters. They have the leakage components that cause stress and loss of energy that results in low efficiency. This paper presents a high boost converter with a voltage multiplier and a coupled inductor. The secondary voltage of the coupled inductor is rectified using a voltage multiplier and series-connected with the boost voltage of primary voltage of the coupled inductor. Therefore, high boost voltage is obtained with low duty cycle. Theoretical analysis and experimental results verify the proposed solutions using a 300W prototype.

• Journal of electromagnetic engineering and science
• /
• v.14 no.1
• /
• pp.25-30
• /
• 2014

This paper discusses the design of a high frequency Greinacher voltage multiplier as rectifier; it has a greater conversion efficiency and higher output direct current (DC) voltage at high power compared to a simple halfwave rectifier. Multiple diodes in the Greinacher voltage multiplier with distributed circuits consume excited power to the rectifier equally, thereby increasing the overall power capacity of the rectifier system. The proposed rectifiers are a Greinacher voltage doubler and a Greinacher voltage quadrupler, which consist of only diodes and distributed circuits for high frequency applications. For each rectifier, the RF-to-DC conversion efficiency and output DC voltage for each input power and load resistance are analyzed for the maximum conversion efficiency. The input power with maximum conversion efficiency of the designed Greinacher voltage doubler and quadrupler is 3 and 7 dB higher, respectively;than that of the halfwave rectifier.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.189-197
• /
• 2017

This paper elaborates two novel proposed topologies (type-I and type-II) of the high step-up DC-DC converter using switched inductor and voltage multiplier cell. The advantages of these proposed topologies are the less voltage stress on semiconductor devices, low device count, high power conversion efficiency, high switch utilization factor and high diode utilization factor. We analyze the Type-II topologies operating principle and mathematical analysis in detail in continuous conduction mode. High-intensity discharge lamp for the automotive application can use the derived topologies. The proposed converters give better performance when compared to the existing types. Also, it is found that the proposed type-II converter has relatively higher voltage gain compared to the type-I converter. A 40 W, 12 V input voltage and 72 V output voltage has developed for the type-II converter and the performances are validated.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.84-88
• /
• 2000

In this paper, a low voltage CMOS analog four-quadrant multiplier is presented. The proposed multiplier is composed of two fully differential transconductors and lowers supply voltage down to VT+2VDS,sat+VDS,triode. The designed analog four-quadrant multiplier has simulated by HSPICE using 0.25㎛ n-well CMOS process with a 1.2V supply voltage. Simulation results show that the THD can be 1.28% at maximum differential input of 0.7VP-P.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.16-21
• /
• 2007

A Dual-Path Voltage Multiplier for passive RFID Tags was proposed and fabricated by using a 0.25um CMOS process with additional steps for schottky diodes. The proposed circuit needs only 4 additional diodes, and the area increment compared to conventional one is negligible in multi-stage voltage multipliers. The simulation and measurement results show that the output power capability of proposed multiplier are about two times larger than the conventional half-wave multiplier.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.72-79
• /
• 2003

This paper proposes a 32${\times}$32 Modified Booth multiplier using CMOS multiple-valued logic circuits. The multiplier based on the radix-4 algorithm is designed with current mode CMOS quaternary logic circuits. Designed multiplier is reduced the transistor count by 67.1% and 37.3%, compared with that of the voltage mode binary multiplier and the previous multiple-valued logic multiplier, respectively. The multiplier is designed with a 0.35${\mu}{\textrm}{m}$ standard CMOS technology at a 3.3V supply voltage and unit current 10$mutextrm{A}$, and verified by HSPICE. The multiplier has 5.9㎱ of propagation delay time and 16.9mW of power dissipation. The performance is comparable to that of the fastest binary multiplier reported.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.279-284
• /
• 2005

We investigated the impedance matching characteristics of UHF-band RFID tag antenna and tag chip for increased reading range. A voltage multiplier designed using 0.4 $\mu$m zero-$V_T$ MOSFET showed that DC output voltage of about 2 V can be obtained using standard CMOS process. The input impedance of the voltage multiplier was examined to achieve impedance matching to the RFID tag antenna using analytical and numerical approaches. The input impedance of the voltage multiplier could be varied in a wide range by selecting the size of MOSFET and the number of multiplying stages, and thus can be impedance matched to a tag antenna in presence of other tag circuit blocks. A meander line inductively-coupled RFID tag antenna operating at UHF band also shows the feasibility of impedance matching to tile RFID tag chip.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3E
• /
• pp.44-48
• /
• 1999

The CMOS four-quadrant analog multiplier for low-voltage low-power applications are presented in this thesis. The circuit approach is based on the characteristic of the LV (Low-Voltage) composite transistor which is one of the useful analog building block. SPICE simulations are carried out to examine the performances of the designed multiplier. Simulation results are obtained by 0.6㎛ CMOS parameters with 2V power supply. The basic configuration of the multiplier is the CMOS Gilbert cell with two LV composite transistors. The linear input range of the multiplier is over ±0.4V with a linearity error of less than 1.3%. The measured -3dB bandwidth is 288MHz and the power dissipation is 255 ㎼.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.2 no.2
• /
• pp.9-16
• /
• 1965

The characteristics of electronic multipliers and their accuracy are analyzed. From the analysis a low cost, four-quadrant timedivision electronic multiplier jis built. This multiplier produces an output voltage equal to 0.01 of the instantaneous product of two input voltage representing independent variables. Each input may either be constant or vary with time over a range of ${\pm}$100 volts. Drift and noise in this multiplier are kept at very low level and dynamic response is below 0.5 decibels up to 700 cycles per second. Methods of testing this multiplier and the results are also described. It is shown that the results agree with theoretical values satisfactorily.