• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.11
• /
• pp.271-276
• /
• 2019

Conventional ARIA algorithm which is used LUT based-S-Box is fast the processing speed. However, the algorithm is hard to applied to small portable devices. This paper proposes the hardware design of optimized ARIA crypto-processor based on the modified composite field S-Box in order to decrease its hardware area. The Key scheduling in ARIA algorithm, both diffusion and substitution layers are repeatedly used in each round function. In this approach, an advanced key scheduling method is also presented of which two functions are merged into only one function for reducing hardware overhead in scheduling process. The designed ARIA crypto-processor is described in Verilog-HDL, and then a logic synthesis is also performed by using Xilinx ISE 14.7 tool with target the Xilnx FPGA XC3S1500 device. In order to verify the function of the crypto-processor, both logic and timing simulation are also performed by using simulator called ModelSim 10.4a.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2000

This paper considers the consturction of 24/25 I-NRZI (Interleaved - Non Return to Zero Inverse) modulator designs for DVCR (Digital Video Cassette Recorder), and size of validity bit in order to store the amplitude value of square-wave and the standard data ( sine and cosine coefficients) at ROM Table that to acceptable the spectrum standard. The validity bit size of the standard data and the amplitude value of square-wave that to store at ROM Table are affected the size of pilot signal on the output spectrum, and the hardware size of modulator. At the designable 24/25 I-NRZI modulator, we simulated using random pattern (F0,F1,F2) that to verification the output data of the spectrum. Moreover, the resultant of the spectrum analysis, at the optimizing value, is 0.065 on the amplitude value of square-wave, and 3bit on the size of bit in order to store the standared data at ROM Table. In order to verify the hardware of designable 24/25 I-NRZI modulator, we perform to modeling of C-language firstly, and coding to Verilog HDL (Cadence Verilog XL) and synthesized using Synopsys (Library "Samsung KG75") tool as a base of spectrum results. In a foundation of this result, we are considered the size of hardware. In this paper, a considerable 24/25 I-NRZI modulator designable less than 10,000 gates as that is improved consturction as regards the path method of pre-coder etc, and able to application digital camcorders as now practical use.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.182-184
• /
• 2009

FlexRay is a new standard of network communication system which provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for future automotive and ship applications. FlexRay communication controller(CC) is the core of the FlexRay protocol specification. In this paper, we first design the FlexRay CC protocol specification and function parts using SDL(Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay CC system was synthesized using Samsung $0.35{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 80 MHz. In addition, to show the validity of the designed FlexRay system, the FlexRay system is combined with sound source localization system in Robot applications. The combined system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.19-24
• /
• 2020

This paper presents a 3-level, 2-level SVPWM technique with 100 kHz switching using Verilog HDL, one of the languages of FPGA. In the case of IGBT devices mainly used in inverters, they have a switching frequency around 20kHz. Recent research and development of next-generation power semiconductor devices such as GAN has enabled switching of more than 100kHz, which can miniaturize power converters, and apply various new algorithms due to the injection of harmonics. In the existing system using the IGBT, the control using the DSP is common, but the controller configuration for 100 kHz switching requires the use of FPGA. Therefore, this paper explains the theory and implementation of SVPWM applied to two-level and three-level inverters using FPGAs and verifies the performance through the output waveform. In addition, this paper implements 3-level SVPWM by using only one carrier instead of using two carriers in the conventional method.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.145-152
• /
• 2010

In this paper, we first propose a fast division algorithm in GF($2^{163}$) using standard basis representation, and then it is mapped into divider for GF($2^{163}$) with iterative hardware structure. The proposed algorithm is based on the binary ExtendedGCD algorithm, and the arithmetic operations for modular reduction are performed within only one "while-statement" unlike conventional approach which uses two "while-statement". In this paper, we use reduction polynomial $f(x)=x^{163}+x^7+x^6+x^3+1$ that is recommended in SEC2(Standards for Efficient Cryptography) using standard basis representation, where degree m = 163. We also have implemented the proposed iterative architecture in FPGA using Verilog HDL, and it operates at a clock frequency of 85 MHz on Xilinx-VirtexII XC2V8000 FPGA device. From implementation results, we will show that computation speed of the proposed scheme is significantly improved than the existing two approaches.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1653-1659
• /
• 2013

In this paper, we propose a new ECAD software for efficiently analyzing and debugging of digital architecture implemented in Verilog HDL or VHDL codes. This software firstly elaborates HDL codes so as to extract internal architecture structure, then generates several graphical aids such as hierarchical schematics by applying placement and routing algorithm, object tree to show configuration of each module, instance tree to show hierarchical structure of instances, and SPD (Signal Propagation Diagram) to show internal interconnections. It is more important function that same objects in different views(HDL codes, object tree, instance tree, SPD, waveform etc.) can be highlighted at the starting any object. These functions are sure to improve efficiency of manual job to fix bugs or to analyze HDL codes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.103-110
• /
• 2008

In this paper, an efficient butterfly structure for 8K/2K-Point Radix-4 FFT algorithm using CORDIC(coordinate rotation digital computer) is proposed. It is shown that CORDIC can be efficiently used in twiddle factor calculation of the Radix-4 FFT algorithm. The Verilog-HDL coding results for the proposed CORDIC butterfly structure show 36.9% cell area reduction comparison with those of the conventional multiplier butterfly structure. Furthermore, the 8K/2K-point Radix-4 pipeline structure using the proposed butterfly and delay commutators is compared with other conventional structures. Implementation coding results show 11.6% cell area reduction. Due to its efficient processing scheme, the proposed FFT structure can be widely used in large size of FFT like OFDM Modem.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.115-121
• /
• 2016

Currently there is a lack of literature on SPICE-level models of double-gate (DG) tunnel field-effect transistors (TFETs). A DG TFET compact model is presented in this work that is used to develop a SPICE model for DG TFETs implemented with Verilog-A language. The compact modeling approach presented in this work integrates several issues in previously published compact models including ambiguity about the use of tunneling parameters A_k and B_k, and the use of a universal equation for calculating the surface potential of DG TFETs in all regimes of operation to deliver a general SPICE modeling procedure for DG TFETs. The SPICE model of DG TFET captures the drain current-gate voltage (I_ds-V_gs) characteristics of DG TFET reasonably well and offers a definite computational advantage over TCAD. The general SPICE modeling procedure presented here could be used to develop SPICE models for any combination of structural parameters of DG TFETs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.2
• /
• pp.31-38
• /
• 2012

In this paper, a low area timing synchronization structure for the IEEE 802.11a OFDM MODEM SoC is proposed. The timing synchronization block of the IEEE 802.11a OFDM MODEM SoC requires large implementation area. In the proposed timing synchronization structure, it is shown that the number of multiplication can be reduced by using the transposed direct form filter. Furthermore, implementation area of the proposed structure can be more reduced using CSD(Canonic Signed Digit) and Common Sub-expression Sharing techniques. Through Verilog-HDL coding and synthesis, it is shown that the 22.7 % of implementation area can be reduced compared with the conventional one.