• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.91-96
• /
• 2014

Through silicon via (TSV) technology is to form a via hole in a silicon chip, and to stack the chips vertically for three-dimensional (3D) electronics packaging technology. This can reduce current path, power consumption and response time. In this study, Cu-filling substrate size was changed from Si-chip to a 4" wafer to investigate the behavior of Cu filling in wafer level. The electrolyte for Cu filling consisted of $CuSO_4$ $5H_2O$, $H_2SO_4$ and small amount of additives. The anode was Pt, and cathode was changed from $0.5{\times}0.5cm^2$ to 4" wafer. As experimental results, in the case of $5{\times}5cm^2$ Si chip, suitable distance of electrodes was 4cm having 100% filling ratio. The distance of 0~0.5 cm from current supplying location showed 100% filling ratio, and distance of 4.5~5 cm showed 95%. It was confirmed good TSV filling was achieved by plating for 2.5 hrs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.3
• /
• pp.137-140
• /
• 2014

With the recent advent of through silicon via (TSV) technology, wafer level-TSV interconnection become feasible in high volume manufacturing. To increase the manufacturing productivity, it is required to develop equipment for backside passivation layer deposition for TSV wafer bonding process with high deposition rate and low film stress. In this research, we investigated the relationship between process parameters and the induced wafer stress of PECVD silicon nitride film on 300 mm wafers employing statistical and artificial intelligence modeling. We found that the film stress increases with increased RF power, but the pressure has inversely proportional to the stress. It is also observed that no significant stress change is observed when the gas flow rate is low.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.18-18
• /
• 2008

3차원 패키징 System In Package (SIP)구조에서 Chip to Chip 단위 Interconnection 역할을 하는 Through Silicon Via(TSV)를 형성하기 위하여 Pulsating RF bias가 장착된 Inductively Coupled Plasma Etcher 장비를 이용하였다. 이 Pulsating 플라즈마 공정 방법은 주기적인 펄스($50{\sim}500Hz$)와 듀티($20{\sim}99%$) cycle 조절이 가능하며, 플라즈마 에칭특성에 영향을 주는 플라즈마즈마 발생 On/Off타임을 조절할 수 있다. 예를 들면, 플라즈마 발생 Off일 경우에는 이온(SFx+, O+)과 래디컬(SF*, F*, O*)의 농도 및 활성도를 급격하게 줄이는 효과를 얻을 수가 있는데, 이러한 효과는 식각 에칭시, 이온폭격의 손상을 급격하게 줄일 수 있으며, 실리콘 표면과 래디컬의 화학적 반응을 조절하여 에칭 측벽 식각 보호막 (SiOxFy : Silicon- Oxy- Fluoride)을 형성하는데 영향을 미친다. 그리고, TSV 형성에 있어서 큰 문제점으로 지적되고 있는 언더컷과 수평에칭 (Horizontal etching)을 개선하기 위한 방법으로, Black-Siphenomenon을 이번 실험에 적용하였다. 이 Black-Si phenomenon은 Bare Si샘플을 이용하여, 언더컷(Undercut) 및 수평 에칭 (Horizontal etching)이 최소화 되는 공정 조건을 간편하게 평가 할 수 있는 방법으로써, 에칭 조건 및 비율을 최적화하는 데 효율적이었다. 결과적으로, Pulsating RF bias가 장착된 Inductively Coupled Plasma Etcher 장비를 이용한 에칭실험은 펄스 주파수($50{\sim}500Hz$)와 듀티($20{\sim}99%$) cycle 조절이 가능하여, 이온(SFx+, O+)과 래디컬(SF*, F*, O*)의 농도와 활성화를 조절 하는데 효과적이었으며, Through Silicon Via (TSV)를 형성 하는데 있어서 Black-Si phenomenon 적용은 기존의 Continuous 플라즈마 식각 결과보다 향상된 에칭 조건 및 에칭 프로파일 결과를 얻는데 효과적이었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.27-31
• /
• 2015

Thermal management becomes a key technology as the power density of high performance and high density devices increases. Conventional heat sink or TIM methods will be limited to resolve thermal problems of next-generation IC devices. Recently, to increase heat flux through high powered IC devices liquid cooling system has been actively studied. In this study a chip-level liquid cooling system with TSV and microchannel was fabricated on Si wafer using DRIE process and analyzed the cooling characteristics. Three different TSV shapes were fabricated and the effect of TSV shapes was analyzed. The shape of liquid flowing through microchannel was observed by fluorescence microscope. The temperature differential of liquid cooling system was measured by IR microscope from RT to $300^{\circ}C$.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.667-673
• /
• 2010

Copper filling into TSV (through-silicon-via) and reduction of the filling time for the three dimensional chip stacking were investigated in this study. A Si wafer with straight vias - $30\;{\mu}m$ in diameter and $60\;{\mu}m$ in depth with $200\;{\mu}m$ pitch - where the vias were drilled by DRIE (Deep Reactive Ion Etching) process, was prepared as a substrate. $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to reduce the time required complete the Cu filling into the TSV, the PPR (periodic pulse reverse) wave current was applied to the cathode of a Si chip during electroplating, and the PR (pulse-reverse) wave current was also applied for a comparison. The experimental results showed 100% filling rate into the TSV in one hour was achieved by the PPR electroplating process. At the interface between the Cu filling and Ti/ Au functional layers, no defect, such as a void, was found. Meanwhile, the electroplating by the PR current showed maximum 43% filling ratio into the TSV in an hour. The applied PPR wave form was confirmed to be effective to fill the TSV in a short time.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.191-191
• /
• 2015

반도체 소자 성능 향상을 위한 3차원 TSV배선 공정이 연구되었다. 전기도금을 이용한 TSV 공정 시 기존에는 황산 구리 수용액내에 억제제, 가속제, 평탄제등을 첨가한 복잡한 전해질이 사용되었지만 본 연구에서는 억제제만을 이용하여 Cu bottom-up filling에 성공하여 전해질의 조성을 단순화 시켰다.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.2
• /
• pp.68-74
• /
• 2014

The seed step-coverage enhancement process (SSEP) using Pd/Cu/PVP colloids was investigated for the filling of through silicon via (TSV) without void. TEM analysis showed that the Pd/Cu nano-particles were well dispersed in aqueous solution with the average diameter of 6.18 nm. This Pd/Cu nano-particles were uniformly deposited on the substrate of Si/$SiO_2$/Ti wafer using electrophoresis with the high frequency Alternating Current (AC). After electroless Cu deposition on the substrate treated with Pd/Cu/PVP colloids, the adhesive property between deposited Cu layer and substrate was evaluated. The Cu deposit obtained by SSEP with Pd/Cu/PVP colloids showed superior adhesion property to that on Pd ion catalyst-treated substrate. Finally, by implementing the SSEP using Pd/Cu/PVP colloids, we achieved 700% improvement of step coverage of Cu seed layer compared to PVD process, resulting in void-free filling in high aspect ratio TSV.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.1-6
• /
• 2013

3D integrated circuit(IC) technology with TSV(through Si via) liquid cooling system is discussed. As a device scales down, both interconnect and packaging technologies are not fast enough to follow transistor's technology. 3D IC technology is considered as one of key technologies to resolve a device scaling issue between transistor and packaging. However, despite of many advantages, 3D IC technology suffers from power delivery, thermal management, manufacturing yield, and device test. Especially for high density and high performance devices, power density increases significantly and it results in a major thermal problem in stacked ICs. In this paper, the recent studies of TSV liquid cooling system has been reviewed as one of device cooling methods for the next generation thermal management.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.229-231
• /
• 2007

Recently, 3D-electronic packaging by TSV is in interest. TSV(Through Silicon Via) is a interconnection hole on Si-wafer filled with conducting metal such as Copper. In this research, chips with TSV are connected by electroplated Sn bump without PR. Then chips with TSV are put together and stacked by the methode of Reflow soldering. The stacking was successfully done and had no noticeable defects. By eliminating PR process, entire process can be reduced and makes it easier to apply on commercial production.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.19-24
• /
• 2009

Formation of an adhesion/barrier layer and a seed layer by sputtering techniques followed by electroplating has been one of the most widely used methods for the filling of through-Si via (TSV) with high aspect ratio for 3-D packaging. In this research, the adhesion and diffusion-barrier properties of the $TaN_x$ film deposited by reactive sputtering were investigated. The adhesion strength between Cu film and $SiO_2$/Si substrate was quantitatively measured by $180^{\circ}$ peel test and topple test as a function of the composition of the adhesive $TaN_x$ film. As the nitrogen content increased in the adhesive $TaN_x$ film, the adhesion strength between Cu and $SiO_2$/Si substrate increased, which was attributed to the increased formation of interfacial compound layer with the nitrogen flow rate. We also examined the diffusion-barrier properties of the $TaN_x$ films against Cu diffusion and found that it was improved with increasing nitrogen content in the $TaN_x$ film up to N/Ta ratio of 1.4.