• Applied Microscopy
• /
• v.25 no.3
• /
• pp.33-39
• /
• 1995

To compare the quality of ultrastructural preservation of Scanning Electron Microscopic specimens dried with different methods; pure air-drying, air-drying with using Tetramethylsilane(TMS), four kind of air-drying using Hexamethyldisilazane(HMDS) and critical point drying(CPD), we conducted scanning electron microscopic observation on liver, skeletal muscle and intestinal tissues from laboratory rat treated with each method. In pure air drying group, severe distortion of tissue surface was observed, and in HMDS treated group, only liver tissue showed slight distortion. But in TMS treated group, each tissue showed a good presentation comparable to CPD group. The results suggest that the method of air-drying using TMS may be the former is less expensive and simple be and also time-saving.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.386-388
• /
• 1995

The polymerization rate, chemical structure and optical properties of tetramethyldisiloxane(TMS) have been investigated. The rate of polymerization of TMS films increased nonlinearly with the discharge power. The refractive indices of thin films varied from 1.40 to 1.43 and they also increased with increasing discharge power. Also, the extinction coefficient was about 0.2 and is independent of photon energy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.9
• /
• pp.1226-1233
• /
• 2002

The purpose of the present study was to examine some basic aspects of laser chemical vapor deposition that will be ultimately utilized for solid freeform fabrication of three dimensional objects. Specifically, deposition of silicon carbide (SiC) using tetramethylsilane (TMS) as precursor was studied for a rod grown by $CO_2$laser-assisted chemical vapor deposition. First, temperature distribution for substrate was analyzed to select proper substrate where temperature was high enough for SiC to be deposited. Then, calculations of chemical equilibrium and heat and mass flow with chemical reactions were performed to predict deposition rates, deposit profiles, and deposit components. Finally, several rods were experimentally grown with varying chamber pressure and compared with the theoretical results.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.4
• /
• pp.174-178
• /
• 2005

Chemical vapor deposition technique has been used to grow epitaxial SiC thin films on Si wafers using tetramethylsilane(TMS) precursor. The films were observed to grow along (110) direction of 3C-SiC at $800^{\circ}C$. The quality of the films was significantly influenced by the TMS flow rate and growth temperature. Nanocrystal SiC films were grown at flow rates of TMS 10 sccm with $H_2$ carrier gas of 100 sccm. The temperature and gas pressure in the reactor have a great influence on the crystallinity and morphology of the SiC film grown. The growth mechanism of the SiC film on the Si substrate without the carbonization process was discussed based on the experimental results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.233-239
• /
• 1998

SiC thin films were deposited by chemical vapor deposition method using tetramethylsilane (TMS) and hexamethyldisilane (HMDS). The chamber pressure during the deposition was kept at about 1 torr. Precursor was transported to the reaction chamber by $H_2$gas and SiC deposition was carried out at the reaction temperature of $1200^{\circ}C$. Si-wafer masked with tantalum and MgO single crystal covered with platinum and molybdenum were used as substrates. The selectivity of SiC deposition was observed by comparing the microstructure between metal (Ta, Pt, and Mo) surfaces and substrate surfaces (Si and MgO). The deposited films were identified as the $\beta-SiC$ phase by X-ray diffraction pattern. Also, the deposition -behavior of SiC on each surface was investigated by the scanning electron microscope analysis.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.2
• /
• pp.83-89
• /
• 2010

Diamond-like carbon (DLC) coating was studied to be a good tribological problem-solver due to its low friction characteristics and high hardness. However, generally hydrogenated DLC film has shown a weak thermal stability above $300^{\circ}C$. However, the silicon doping DLC process by DC pulse plasma enhanced chemical vapor deposition (PECVD) for the new DLC coating which has a good characterization with thermal stability at high temperature itself has been observed. And we were discussed a process for optimizing silicon content to promote a good thermal stability using various tetramethylsilane (TMS) and methane gas at high-temperature. The chemical compositions of silicon-containing DLC film was analyzed using X-ray photoelectron spectroscopy (XPS) before and after heat treatment. Raman spectrum analysis showed the changed structure on the surface after the high-temperature exposure testing. In particular, the hardness of silicon-containing DLC film showed different values before and after the annealing treatment.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.789-794
• /
• 2002

In this study, nano-sized Si-C-N precursor powders were synthesized by Chemical Vapor Condensation Method(CVC) using TMS(Tetramethylsilane: $Si(CH_3)_4$), $NH_3$ and $H_2$ gases under the various reaction conditions of the reaction temperature, TMS/$NH_3$ ratio and TMS/$H_2$ ratio. XRD and FESEM were used to analysis the crystalline phase and the average particle size of the synthesized powders. It was found that the obtained powders under the considering conditions were all spherical amorphous powder with the particle size of 87∼130 nm. The particle size was decreased as the reaction temperature increased and TMS/$NH_3$ and TMS/$H_2$ ratio decreased. As the results of EA analysis, it was found that the synthesized powders had been formed the powders composed of Si, N, C and H. Through FT-IR results, it was found that the synthesized powders were Si-C-N precursor powders with Si-C, Si-N and C-N bonds.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.783-788
• /
• 2002

In this study, nano-sized Si-C-N precursor powders were synthesized by Chemical Vapor Condensation Method(CVC) using TMS(Tetramethylsilane: Si($CH_3)_4$), $NH_3$ and $H_2$ gases under the various reaction conditions of the reaction temperature, TMS/$NH_3$ ratio and TMS/$H_2$ ratio. XRD and FESEM were used to analysis the crystalline phase and the average particle size of the synthesized powders. It was found that the obtained powders under the considering conditions were all spherical amorphous powder with the particle size of 87∼130 nm. The particle size was decreased as the reaction temperature increased and TMS/$NH_3$ and TMS/$H_2$ ratio decreased. As the results of EA analysis, it was found that the synthesized powders had been formed the powders composed of Si, N, C and H. Through FT-IR results, it was found that the synthesized powders were Si-C-N precursor powders with Si-C, Si-N and C-N bonds.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.141-144
• /
• 1997

High quality 3C-SiC epilayer was grown on Si(111) at 125$0^{\circ}C$ using chemical vapor deposition(CVD) technique by pyrolyzing tetramethylsilane(TMS). 3C-SiC epilayer was doped by tetramethylgallium(TMGa) during the CVD growth. The crystallinity of 3C-SiC was significantly enhanced by doping the gallium impurity.

• YAKHAK HOEJI
• /
• v.33 no.3
• /
• pp.203-205
• /
• 1989

A method is presented for calculating the $^{13}C$ chemical shifts produced in liquid solution by referenced relative to RF frequency. The method is useful to get the real variations of chemical shifts in magnetic field by eliminating the affects of the variation of a reference substance.