• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2133-2138
• /
• 2013

In this paper, the variation of a steep subthreshold slope at elevated temperature in nanowire n-channel junctionless and inversion mode MuGFETs has been compared. It has been observed that the subthreshold slopes are increased with the increase of the operation temperature in junctionless and inversio-mode transistors. The variation of a subthreshold slope with operation temperature is more significant in junctionless transistor than inversion-mode transistor. The temperature dependence on the variation of a subthreshold slope for different fin widths shows a similar behavior regardless of fin width. From the temperature dependence on the variation of a subthreshold slope for different substrate biases, it has been observed that the variation of a subthreshold slope is less significant when the substrate bias was applied. It is worth noting that one can achieve a subthreshold slope of below 41mV/dec at elevated temperature of 400K using the junctionless MuGFETs with a positive substrate bias.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.105-106
• /
• 2005

The impact ionization MOS (I-MOS) transistor with 50nm channel length is presented by using 2-D device simulator ISE-TCAD. The subthreshold slope cannot be steeper than kT/q since the subthreshold conduction is due to diffusion current. As MOSFETs are scaled down, this problem becomes significant and the subthreshold slope degrades which leads an increase in the off-current and off-state power dissipation. The I-MOS is based on a gated p-i-n structure and the subthreshold conduction is induced by impact ionization. The simulation results show that the subthreshold slope is 11.7 mV/dec and this indicates the I-MOS improves the switching speed and off-state characteristics.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.711-714
• /
• 2003

In this presentation, we investigated the abnormal subthreshold slope of the FD SOI MOSFETs upon the rapid thermal annealing. Based on subthreshold technique and C-V measurement, we deduced that the hump of the subthreshold slope comes from the abnormal D$_{it}$ distribution after RTA. The local kink in the interface trap density distribution by RTA drastically degrades the subthreshold characteristics and mini hump can be eliminated by S-PGA.A.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.486-489
• /
• 2002

In this paper, we have investigated characteristics of sub-50nm double gate MOSFET. From I-V characteristics, we obtained =510$\mu$A/${\mu}{\textrm}{m}$ at VMG=VDS=1.5V and VSG=3.0V. Then, the transconductance is 111$\mu$A/V, subthreshold slope is 86mV/dec and DIBL (Drain Induced Barrier Lowering) is 51.3mV. Also, we have presented that TCAD simulator is suitable for device simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.490-493
• /
• 2002

In this study, we have investigated optimum value for side gate length and side gate voltage of double gate (DG) MOSFET with main gate and side gate. We know that optimum side gate voltage for each side length is about 3V. Also, we know that optimum side gate length for each main gate length is about 70nm. We have presented the transconductance and subthreshold slope for each side gate length. We have simulated using ISE-TCAD tool for characteristics analysis of device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.171-172
• /
• 2018

Dual gate L-shaped tunnel field-effect-transistor (DG-LTFET) is presented in this study. DG-LTFET achieves near vertical subthreshold slope (SS) and its ON current is also found to be higher then both conventional TFET and LTFET. This device could serve as a potential replacement for conventional complimentary metal-oxide-semiconductor (CMOS) technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.713-716
• /
• 2013

The device performances of N-channel Tunneling FET have been characterized with different intrinsic length between drain and gate($L_{in}$), drain and source doping, permittivity and oxide thickness when the total effective channel length is constant. N-channel Tunneling FET of SOI structure have been used in characterization. $L_{in}$ was from 30nm to 70nm, dose concentration of drain and source were from $2{\times}10^{12}cm^{-2}$ to $2{\times}10^{15}cm^{-2}$ and from $1{\times}10^{14}cm^{-2}$ to $3{\times}10^{15}cm^{-2}$, permittivity was from 3.9 to 29, and oxide thickness was from 3nm to 9nm. The device performances were characterized by Subthreshold slope(S-slope), On/off ratio, and leakage current. From the simulation results, the leakage current have been reduced for long $L_{in}$ and low drain doping. S-slope have been reduced for high source doping, high permittivity and thin oxide thickness. With considering the leakage current and S-slope, it is desirable that are long $L_{in}$, low drain doping, high source doping, high permittivity and thin oxide thickness to optimize device performance in n-channel Tunneling FET.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.290-296
• /
• 2013

We analysed interfacial traps in organic thin-film transistors (TFTs) in which pentacene and 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-pentacene) organic semiconductors were deposited by means of vacuum-thermal evaporation and drop-coating methods, respectively. The thermally-deposited pentacene film consists of dentritic grains with the average grain size of around 1 m, while plate-like crystals over a few hundred microns are observed in the solution-processed TIPS-pentacene film. From the transfer characteristics of both TFTs, lower subthreshold slope of 1.02 V/decade was obtained in the TIPS-pentacene TFT, compared to that (2.63 V/decade) of the pentacene transistor. The interfacial trap density values calculated from the subthreshold slope are about $3.4{\times}10^{12}/cm^2$ and $9.4{\times}10^{12}/cm^2$ for the TIPS-pentacene and pentacene TFTs, respectively. Herein, lower subthreshold slope and less interfacial traps in TIPS-pentacene TFTs are attributed to less domain boundaries in the solution-processed TIPS-pentacene film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1288-1291
• /
• 2007

We investigated the effect of Cr thickness on the electrical properties of triisopropylsilyl pentacene organic thin-film transistor (OTFT) employing suspended source-drain electrode. With Cr thickness of 10 nm, the field-effect mobility, on/off ratio and subthreshold slope were $0.017\;cm^2/Vs$, $8.78\;{\times}\;10^3$ and 10 V/decade, respectively. By increasing the Cr thickness to 100 nm, the fieldeffect mobility was increased to $0.032\;cm^2/Vs$, on/off ratio to $1.12{\times}10^5$ and subthreshold slope to 1 V/decade.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.6
• /
• pp.253-256
• /
• 2010

Different active layer thicknesses for zinc oxide (ZnO) bottom-contact thin-film transistors (TFTs) were fabricated with a poly-4-vinyphenol polymeric dielectric using injector type atomic layer deposition. The properties of the ZnO TFTs were influenced by the active thickness and width-to-length (W/L) ratio of the device. The threshold voltage of ZnO TFTs shifted positively as the active layer thickness decreased, while the subthreshold slope decreased. The W/L ratio of ZnO TFTs also affected the mobility and subthreshold slope. An optimized TFT structure exhibited an on-tooff current ratio of above 106 with solid saturation.