• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.40-54
• /
• 1990

Recently, Fine Ceramics have been concerned significantly with some excellent properties and many functions as new industrial materials to the industry at alrge. For the manufacture of Fine Ceramics, sintering is essential process. Thus the most of a Fine Ceramics used for precision parts are in need of machining proces. It is, however, very difficult to manufacture the Advanced Ceramics with high efficiency because they have not only high strength and brittl- eness but also high hardness. In present research, experiments are carried out to obtain the basic knowledge of Fine Ceramics grinding with high efficiency. Representative advanced ceramics, such as A1/sub 2/0/sub 3/, Z/sub r/O/sub 2/SiC snd Si/sub 2/N/sub 4/are ground with diamond wheels using conventional surface grinding machine. This research is carried out for the purpose of saving machining technology required for manufactiring Fine Ceramics parts

• Composites Research
• /
• 제23권6호
• /
• pp.19-25
• /
• 2010

본 논문은 유리섬유/에폭시 4-매 주자직 적층 복합재와 PVC 폼 코어로 제작된 철도차량용 복합재 대차프레임의 금속재 체결부 볼트 위치 최적화 연구에 대해 서술했다. 최적화 해석은 APDL(Ansys Parameter Design Language)을 이용한 서브모델링 기법을 적용하였으며 부분문제 근사방법에 의한 최적화를 수행하였다. 이때, 최적화 해석에 적용된 서브모델링 기법은 관심영역을 포함한 부분모델에 대한 계산을 재수행 함으로써 해석에 소요되는 시간을 절약하고 상세한 결과를 도출 할 수 있다. 복합재 대차프레임의 구조해석은 JIS E 4207에 의거하여 수행하였다. 서브모델링 기법을 적용한 복합재 대차프레임의 최적화 해석은 전체모델에 대한 결과에 비해 요소망 밀도의 조절을 통한 해석시간 절약과 상세한 결과를 얻을 수 있으며, 또한 볼트위치의 최적화로 인해 보다 낮은 Von-Mises 응력값이 나타남을 확인하였다.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.365-370
• /
• 2021

In this research, we proceeded with research on plasma resistance of the cleaning process of APS(Atmospheric Plasma Spray)-Y₂O₃ coated parts used for semiconductor and display plasma process equipment. CF₄, O₂, and Ar mixed gas were used for the plasma environment, and respective alconox, surfactant, and piranha solution was used for the cleaning process. After APS-Y₂O₃ was exposed to CF₄ plasma, the surface changed from Y₂O₃ to YF₃ and a large amount of carbon was deposited. For this reason, the plasma corrosion resistance was lowered and contamination particles were generated. We performed a cleaning process to remove the defect-inducing surface YF₃ layer and carbon layer. Among three cleaning solutions, the piranha cleaning process had the highest detergency and the alconox cleaning process had the lowest detergency. Such results could be confirmed through the etching amount, morphology, composition, and accumulated contamination particle analysis results. Piranha cleaning process showed the highest detergency, but due to the very large thickness reduction, the base metal was exposed and a large number of contaminated particles were generated. In contrast, the surfactant cleaning process exhibit excellent properties in terms of surface detergency, etching amount, and accumulated contamination particle analysis.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.159-166
• /
• 2019

Objectives: The purpose of this study was to evaluate the personal exposure to $PM_{10}$ by body parts for the development of dust monitoring wearable device for swine farmers. Methods: Tasks were classified by using motion pictures taken by action cameras attached to swine farmers. Concentrations of $PM_{10}$ were measured by attaching direct-reading instruments at the head, neck and waist of worker. Differences of $PM_{10}$ exposure between body parts were analyzed with linear regression. Results: We identified three tasks(vaccination, moving pigs, and manure treatment). $PM_{10}$ concentration during vaccination was the highest among the tasks, and the body part showing the highest concentration of $PM_{10}$ was the waist regardless of task. In all tasks, the closer distance between the body parts, the higher were the R-squared values(vaccination 0.4221, moving pigs 0.6990, and manure treatment 0.2164). Conclusions: We presumed that $PM_{10}$ concentrations were affected by the parts of the body in which they were measured. In order to develop swine farmer's wearable device for monitoring dust concentration in air, the determination of the positions of monitoring sensor to ensure accurate measurement is essential. Considering the results of this study, wearable sensor should be positioned at the waist.

• 대한수학회논문집
• /
• 제38권3호
• /
• pp.715-723
• /
• 2023

In this paper, we construct explicitly an infinite family of primes P with h^±_P ≡ 0 (mod q^{deg P}), where h^±_P are the plus and minus parts of the divisor class number of the P-th cyclotomic function field over 𝔽_q(T). By using this result and Dirichlet's theorem, we give a condition of A, M ∈ 𝔽_q[T] such that there are infinitely many primes P satisfying with h^±_P ≡ 0 (mod p^e) and P ≡ A (mod M).

• 대한산업공학회지
• /
• 제42권6호
• /
• pp.404-411
• /
• 2016

In footwear manufacturing systems, the upper parts of the shoes are manually sewed on a sub-line while bottom parts are produced by machines such as injection and molding machines on a sub-line before these two parts are combined into complete shoes on a final assembly line. The manual operations for the upper parts lead to a large variability in processing times, resulting in higher work-in-process inventory. In most footwear industries, production lines have been controlled by MRP-based push systems. Some industries attempt to introduce Kanban-based pull systems. This paper identifies the characteristics of the footwear manufacturing processes, and discusses the problems of the current control systems. As an operational alternative, a CONWIP-based control strategy is presented. Simulation experiments are performed to examine the performance of the control strategies.

• 센서학회지
• /
• 제33권3호
• /
• pp.179-184
• /
• 2024

In the car industry, welding is a fundamental linking technique used for joining components, such as steel, molds, and automobile parts. However, accurate inspection is required to test the reliability of the welding components. In this study, we investigate the detection of weld beads using 2D image processing in an automatic recognition system. The sample image is obtained using a 2D vision camera embedded in a lighting system, from where a portion of the bead is successfully extracted after image processing. In this process, the soot removal algorithm plays an important role in accurate weld bead detection, and adopts adaptive local gamma correction and gray color coordinates. Using this automatic recognition system, geometric parameters of the weld bead, such as its length, width, angle, and defect size can also be defined. Finally, on comparing the obtained data with the industrial standards, we can determine whether the weld bead is at an acceptable level or not.

• 충청수학회지
• /
• 제23권4호
• /
• pp.861-870
• /
• 2010

In this paper, we define the $M_{\alpha}$-integral and prove the integration by parts formula for the $M_{\alpha}$-integral.

• 대한수학회지
• /
• 제57권2호
• /
• pp.471-487
• /
• 2020

We find congruences modulo 32, 64 and 128 for the partition function ${\overline{PP}_o}(n)$, the number of overpartition pairs of n into odd parts, with the aid of Ramamnujan's theta function identities and some known identities of t_k(n), for k = 6, 7, where t_k(n) denotes the number of representations of n as a sum of k triangular numbers. We also find two Ramanujan-like congruences for ${\overline{PP}_o}(n)$ modulo 128.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.742-748
• /
• 2003

The structural parameters such as Lc, La and d of $CO_2$activated isotropic carbon fibers(ACFs) were obtained from XRD in order to understand a development mechanism of micropores. And the structural parameters were compared with specific surface area(SSA) data. The $d_{002}$, Lc, and La of the original fiber were measured to be 4.04$\AA$, 6.2$\AA$, and 23.6$\AA$, respectively. Carbonization of outer-parts and oxidization of inner-parts of the original fibers were far from completeness. It was observed that the structural changes of the ACFs during activation take place severely, therefore the carbonization and the oxidization of the fibers take place simultaneous with pore developments. The $d_{002}$ of the ACFs was increased to be 2.80$\AA$, and the La of the ACFs was decreased to be 17.0$\AA$ by activation. It was shown that the pores are developed continuously from the outer-parts to the inner-parts of the fibers, therefore the SSA increases as a result of the development of pores fully to the inner-parts of the fiber when the burn-off degree was over :39%. It seems that the (002) planes of crystallites contribute to the micropore wall related to the super high SSA.SSA.