• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.300-309
• /
• 2010

Melamincyanurate(MC), as an non halogen flame retardant are used as the polymer and plastic materials. In this study, melamine and cyanuric acid were used for the synthesis of MC. The optimum condition of synthetic MC were controlled by different molar ratio of melamine to cyanuric acid. MC was modified by coupling reaction with four different agents. The influences of modified MC were based on the coupling agent types. Preparation methods are available to offer the prospect of improved morphology control deposit stability in polyol. The results reveal that glycidoxypropyltrimethoxysilane(GDS) has the best storage stability. The best properties were obtained with melamine and cyanuric acid from 1:1 molar ratio. Modification of MC through coupling agent can efficiently enhanced the deposit stability in polyol up to 30 %.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1280-1285
• /
• 1998

Foaming method is presented the preparation of porous materials from high-concentrated kaolin silica and flyash slurries. The slurries were foamed dried and sintered respectively. The porosity of sintered ma-terials was about 70-75% Mean pore-size was the range of 70-150$\mu\textrm{m}$ and pore structure was continuous Sodium lauryl sulfate anionic surfactant was used as a foaming agent. The foaming ability and the froth sta-bility were increased with increasing the concentration of the foaming agent. But the size of the constituent bubble of froth after foaming process was not affected by the concentration of the foaming agent. These results showed that the mean pore-size of sintered materials was closely related to the froth stability which is related to the change of bubble-size during the drying process.

• Transactions on Electrical and Electronic Materials
• /
• 제6권1호
• /
• pp.29-32
• /
• 2005

Chemical mechanical polishing is an essential process in the production of copper-based chips. On this work, the stability of hydrogen peroxide ($H_{2}O_{2}$) as an oxidizer of copper CMP slurry has been investigated. $H_{2}O_{2}$ is known as the most common oxidizer in copper CMP slurry. But $H_{2}O_{2}$ is so unstable that its stabilization is needed using as an oxidizer. As adding KOH as a pH buffering agent, stability of $H_{2}O_{2}$ decreased. However, $H_{2}O_{2}$ stability in slurry went up with putting in small amount of BTA as a film forming agent. There was no difference of $H_{2}O_{2}$ stability between pH buffering agents KOH and TMAH at similar pH value. Addition of $H_{2}O_{2}$ in slurry in advance of bead milling led to better stability than adding after bead milling. Adding phosphoric acid resulted in the higher stability. Using alumina C as an abrasive was good at stabilizing for $H_{2}O_{2}$.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.75-81
• /
• 2018

At present research on mining backfill materials is being carried out to prevent ground subsidence and breaking by underground cavern of exhausted mines. However, backfill materials can cause secondary environmental issues such as ground pollution. To solve these issues, liner and cover materials are constructed before backfill materials constructed, to inhibit toxic substances form moving to the surroundings. Liner and cover materials, however, should have an accelerating performance after construction and when the accelerating performance is degraded, the work efficiency can be lowered, and the construction cost can be increased, by many rebound content. Therefore, this study develops mining liner and cover materials, and evaluates their accelerating performance and physical properties of liner and cover materials by types and content of accelerating agent. In case of aluminate accelerating agent, it is mixed with more than 5% of liner and cover materials(binder/ratio); thus an accelerating performance satisfying Korean Industrial Standards(KS) occurs, and in case of alkali-free accelerating agent, when it is mixed with more than 7%(binder/ratio), accelerating performance satisfying KS occurs. The more the accelerating agent capacity increases, the more compressive strength decreases. In addition, it is confirmed that compressive strength of aluminate accelerating agent is more degraded than compressive strength of the alkali-free accelerating agent. It is also confirmed that drying shrinkage stability of the alkali-free accelerating agent is better than the drying shrinkage stability of the aluminate accelerating agent.

• Transactions on Electrical and Electronic Materials
• /
• 제4권2호
• /
• pp.1-4
• /
• 2003

The purpose of this study was to investigate the characteristics of slurry including phosphoric acid for chemical-mechanical planarization of copper and tantalum nitride. In general, the slurry for copper CMP consists of alumina or colloidal silica as an abrasive, organic acid as a complexing agent, an oxidizing agent, a film forming agent, a pH control agent and additives. Hydrogen peroxide (H$_2$O$_2$) is the material that is used as an oxidizing agent in copper CMP. But, the hydrogen peroxide needs some stabilizers to prevent decomposition. We evaluated phosphoric acid (H$_3$PO$_4$) as a stabilizer of the hydrogen peroxide as well as an accelerator of the tantalum nitride CMP process. We also estimated dispersion stability and zeta potential of the abrasive with the contents of phosphoric acid. An acceleration of the tantalum nitride CMP was verified through the electrochemical test. This approach may be useful for the development of the 2$\^$nd/ step copper CMP slurry and hydrogen peroxide stability.

• Journal of Pharmaceutical Investigation
• /
• 제1권1호
• /
• pp.101-108
• /
• 1971

The stability and toxicity test for p.p'-DDT, DDVP and dipterex that put to used sample in this study effects is follows A. about p.p'-DDT (1) In elevating the stability of p.p'-DDT, best stabilizing solvent was benzene. (2) The stability-agent has no difficulty as long as it not contain metal ion for instance $Z_n^{2+}$,$C_r^{3+}$,$Al^{3+}$,and $Fe^{2+or3+}$ but in case of contain $F_e^{3+}$, the combination of salicylaminoguanidine is best effective. (3) Using this product for water-suspension, We must use span 40 for stability agent and adding it at the same time. (4) We must use container which does not week alkali and metal ion but it is to preserved in tight light-resistant container. (5) The stopper of container is adapted with above-mentioned condition of container, but it is better not to use metal material. (6) This product needs opening ventilation more than 30 minutes after diffusion or spray and in the room we remove cause of remained poison by cleaning the bottom. B. about DDVP and Dipterex (1) Benzene or toluene in best solvent to preserve stability of DDVP and Dipterex. (2) Span 40 is superior for stability agent of this product and second is span 80. (3) The pH of solution is very stable in pH 5-6 and comparative stable in alkali more than p,p'-DDT. (4) Container is to preserved in tight, lightresistant container and especially be careful of outflow and inflow of water. (5) Because this product is centeral stimulant poison, we must pay attention to prevent cause of contact diadermic toxicity after use.

• 대한화장품학회지
• /
• 제18권1호
• /
• pp.132-149
• /
• 1992

이 논문은 외관, 안정도, 얇고 균일하게 끈적이지 않는 Film 형성 등의 우수한 특징을 갖고 있기 때문에 Cosmetic preparations의 여러 방면에 응용하고 있는 Microemulsion gel에 관한 것이다. 우리의 연구는 Microemulsion의 Clarifying agent 또는 Coupling agent로 이용되고 있는 Polyol류가 Microemulsion에 미치는 영향을 해명함으로써, Consistency, Stability, Clarity, Pick-up from a container등이 우수한 최적의 Microemulsion gel의 형성 조건을 확립하여 Cosmetic preparations에 응용할 수 있도록 하는 것이다. 연구한 System은 De-ionized water, Oil로는 Polar한 Ester oil, Emulsifying agent는 Nonionic syrfactant, Coupling agent는 Polyol로 구성하였으며, Three component phase diagram과 Tetrahedral phase diagram을 이용하여, Polyol의 비율에 따라 Microemulsion gel의 투명 영역, Consistency, 충격에 의한 Resonance 효과, Pick-up from a container등의 변화를 고찰하였다. 연구결과 구성 성분 중 De-ionized water의 Coupling agent의 비율변화에 의한 영향이 가장 크게 나타났으며, Coupling agent로 사용된 Glycerine의 물에 대한 비율이 63-75%일 때 최적 Microemulsion gel 형성 영역이 가장 넓게 나타났다. 특히 Polyol의 비율을 적절히 선택함으로써, 최근 관심이 모아지고 있는 최소의 유화제량으로 최대의 유상량을 함유한 Microemulsion gel을 얻는데 기여할 수 있을 것으로 생각된다.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.526-532
• /
• 2014

In this paper, we present and analyze a LQ (Linear Quadratic) inverse optimal state-consensus protocol for continuous-time multi-agent systems with undirected graph topology. By Lyapunov analysis of the state-consensus error dynamics, we show the sufficient conditions on the algebraic connectivity of the graph to guarantee LQ inverse optimality and closed-loop stability. A more relaxed stability condition is also provided in terms of the algebraic connectivity. Finally, a formation control protocol for multiple mobile robots is proposed based on the target LQ inverse optimal consensus protocol, and the simulation results are provided to verify the performance of the proposed LQ inverse formation control method.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2012

Dyeing and fastness characteristics of 100% meta-aramid fiber were investigated with cationic dyes and swelling agents under various dyeing conditions such as dyeing temperature and pH of dye bath. Dye exhaustion started at around $80^{\circ}C$ and settled down at $130^{\circ}C$. Among swelling agents used, N-methyl formanilide showed comparatively higher K/S values comparing to 1-phenoxypropan-2-ol. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption and stability of colorimetric property. Wash and rubbing fastness were generally good but low light fastness found can be attributable to the poor photo-stability of the cationic dyes.

• Geomechanics and Engineering
• /
• 제37권5호
• /
• pp.499-510
• /
• 2024

In northern China, abundant summer rainfall and a higher water table can weaken the soil due to salt heave, collapsibility, and increased moisture absorption, thus the chlorine saline soil (silty clay) needs to be stabilized prior to use in road embankments. To optimize chlorine saline soil stabilizing programs, unconfined compressive strength tests were conducted on soil treated with five different stabilizers before and after soaking, followed by field compaction test and unconfined compressive strength test on a trial road embankment. In situ testing were performed with the stabilized soils in an expressway embankment, and the results demonstrated that the stabilized soil with lime and SH agent (an organic stabilizer composed of modified polyvinyl alcohol and water) is suitable for road embankments. The appropriate addition ratio of stabilized soil is 10% lime and 0.9% SH agent. SH agent wrapped soil particles, filled soil pores, and generated a silk-like web to improve the moisture stability, strength, and stress-strain performance of stabilized soil.