• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.520-530
• /
• 2021

This study conducted a meta-analysis on the variables related with case management performance in Korea. In order to do a meta-analysis, a total of 27 journals, theses and dissertations published between 1998 and 2020 were reviewed systematically. Through this process, this study calculated average effect size of each variable and explored moderator variables. This study results were as follows. First, this study identified a total of 14 individual, enviroment of institution, population variables related with case management performance. Second, the results indicated that case management performance variables which showed large effect sizes included professional capability, supervision, network, case management significance recognition, manual, agency support. Third, variables with medium effect sizes included self-efficacy, case management education, autonomy, motivation, number of conference and variables with small effect sizes included work experience, academic ability, age. Fourth, Moderator effects were identified in the field, target, publication of case management. Finally, the implications of the study findings were discussed.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2022

The copper plating process used to fabricate the submicron damascene pattern of Cu wiring for Si wafer was applied to the plating of a PCB pattern of several tens of microns in size using the same organic additives and current density conditions. In this case, the non-uniformity of the plating thickness inside the pattern was observed. In order to quantitatively analyze the cause, a numerical calculation considering the solution flow and electric field was carried out. The calculation confirmed that the depletion of Cu²⁺ ions in the solution occurred relatively earlier at the bottom corner than the upper part of the pattern due to the plating of the sidewall and the bottom at the corner of the pattern bottom. The diffusion coefficient of Cu²⁺ ions is 2.65 10^-10 m²/s, which means that Cu²⁺ ions move at 16.3 ㎛ per second on average. In the cases of small damascene patterns, the velocity of Cu²⁺ ions is high enough to supply sufficient ions to the inside of the patterns, while sufficient time is required to replenish the exhausted copper ions in the case of a PCB pattern having a size of several tens of microns. Therefore, it is found that the thickness uniformity can be improved by reducing the current density to supply sufficient copper ions to the target area.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.481-488
• /
• 2022

The Cu₂ZnSn(S_xSe_1-x)₄ (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se₂ (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn²⁺ element with a Cd²⁺element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd²⁺ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (J_sc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd²⁺ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd²⁺ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd²⁺ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, J_sc of 34.0 mA/cm², and fill factor (FF) of 62.7 %, respectively.

• Korean Journal of Environmental Biology
• /
• v.40 no.1
• /
• pp.54-69
• /
• 2022

We conducted a field survey from 2018 to 2020 to analyze the spatial distribution of phytoplankton communities at 13 stations in the East Sea. The diatom Chaetoceros curvisetus appeared as the dominant species in winter, and small flagellates less than 20 ㎛ prevailed in all seasons except winter. The seasonal average range of the micro (>20 ㎛), nano (20 ㎛≥Chl-a>3 ㎛), and picophytoplankton (≤3 ㎛) was 20.6-26.2%, 27.1-35.9%, and 40.8-49.0%, respectively. The composition ratio of nano and picophytoplankton was high at the surface mixed layer from spring to autumn when the water columns were strongly stratified. Especially, the stability of the water mass was increased when the summer surface water temperature was higher than that of the previous year. As a result, the nutrient inflow from the lower layer to the surface was reduced as the ocean stratification layer was strengthened. Therefore, the composition ratio of nano and picophytoplankton was the highest at 77.9% at the surface mixed layer. In conclusion, the structure of the phytoplankton community in the East Sea has been miniaturized, which is expected to form a complex microbial food web structure and lower the carbon transfer rate to the upper consumer stage.

• The Korean Journal of Franchise Management
• /
• v.5 no.1
• /
• pp.143-160
• /
• 2014

This study focuses that the business starters can refer to this study, select better franchise headquarter and make the franchise member agreement. The most concerned part for the people who want to open franchise shop is what brand is reliable and safe to them. I have analyzed disclosure report that contains overall information of franchise headquarters and researched 300 franchise shops as sample. I drew the conclusion of the decision factors of franchise member agreement, overlooked demographical status by frequency analysis with SPSS 18.0 and performed disperse analysis to examine the decision factors of franchise member agreement and the difference between sex, service type, shop size and income level. In conclusion, the most concerned factor for the franchise agreement is sales management. Sex, shop size and income level are not meaningful factors, but the cost and training management factors are considered differently based on the service type. I hope 1) this study can be utilized for the franchise business starters judge and refer information level provided by the headquarters and make a successful franchise shop business. 2) this study can make solid relationship between franchise members and present a long term vision to them. Finally, this study can be a foundation to promote franchise field through making and supplementing the law of promoting proficient and good franchise headquarters and fairness of franchise transaction and franchise encouragement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2359-2368
• /
• 2013

Cone penetration tests (CPTs) have been increasingly used for site characterizations. However, the site investigations using CPTs are often limited due to soil conditions depending on the cone size and capacity of the CPT system. The small sectional area of a miniature cone improves the applicability of the CPT system due to the increased capacity of the CPT system. A continuous intrusion system using a coiled rod allows fast and cost effective site investigation. In this study, the performance of the continuous intrusion miniature cone penetration test (CIMCPT) system has been evaluated by comparison tests with the standard CPT system at several construction sites in Korea. The results show that the CIMCPT system has a same performance with the CPT system and has advantages on the mobility and applicability. According to field verification tests for scale effect evaluation, the cone tip resistance evaluated by CIMCPT overestimates by 10% comparing to standard CPTs. A crawler mounted with the CIMCPT system has been implemented to improve accessibility to soft ground, and has shown improvement over the truck type CIMCPT system. Therefore, the improved CIMCPT system can be utilized as a cost effective and highly reliable soil investigation methodology to detect the depth of soft ground and to evaluate soil classification.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.47-56
• /
• 2020

The sound source localization technique has various application fields in the era of internet-of-things, for which the probe size becomes critical. The localization methods using the acoustic intensity vector has an advantage of downsizing the layout of the array owing to a small finite-difference error for the short distance between adjacent microphones. In this paper, the acoustic intensity vector and the Time Difference of Arrival (TDoA) method are compared in the viewpoint of the localization error in the far-field. The comparison is made according to the change of spacing between adjacent microphones of the three-dimensional microphone array arranged in a tetrahedral shape. An additional test is conducted in the reverberant field by varying the reverberation time to verify the effectiveness of the methods applied to the actual environments. For estimating the TDoA, the Generalized Cross Correlation-Phase transform (GCC-PHAT) algorithm is adopted in the computation. It is found that the mean localization error of the acoustic intensimetry is 2.9° and that of the GCC-PHAT is 7.3° for T₆₀ = 0.4 s, while the error increases as 9.9°, 13.0° for T₆₀ = 1.0 s, respectively. The data supports that a compact array employing the acoustic intensimetry can localize of the sound source in the actual environment with the moderate reflection conditions.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.824-828
• /
• 2006

Introduction of motion capture system to the field of digital entertainment paved the way to accelerate the development of 3D character animation all the more. Motion capture system has been developed of the level that it can capture the fierce motions of character particularly in the digital game image and improve the dynamic characteristics by capturing the movement of human muscle or express the human's true emotion by capturing wrinkles and expression on face. Such an extension of realistic expression enables them to be used increasingly in movie, TV, advertisement, music video, etc centering around the game industry in the field of digital entertainment. The fact is, however, that many difficulties are held in the image production process compared with the competing countries such as USA and Japan, owing to inferiorities in technical expertise and capital in the image production process using the local motion capture, insufficient professional human resources of motion capture and small size of local motion capture image market. Hence, this study intends to suggest the plan to improve the technical problems in terms of integrated motion capture system, motion capture professional human resources and motion capture in-house program development in the production process of digital entertainment image using the motion capture system by surveying local and overseas examples of image production.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.30-39
• /
• 2006

Iris recognition is that identifies a user based on the unique iris texture patterns which has the functionalities of dilating or contracting pupil region. Iris recognition systems extract the iris pattern in iris image captured by iris recognition camera. Therefore performance of iris recognition is affected by the quality of iris image which includes iris pattern. If iris image is blurred, iris pattern is transformed. It causes FRR(False Rejection Error) to be increased. Optical defocusing is the main factor to make blurred iris images. In conventional iris recognition camera, they use two kinds of focusing methods such as lilted and auto-focusing method. In case of fixed focusing method, the users should repeatedly align their eyes in DOF(Depth of Field), while the iris recognition system acquires good focused is image. Therefore it can give much inconvenience to the users. In case of auto-focusing method, the iris recognition camera moves focus lens with auto-focusing algorithm for capturing the best focused image. However, that needs additional H/W equipment such as distance measuring sensor between users and camera lens, and motor to move focus lens. Therefore the size and cost of iris recognition camera are increased and this kind of camera cannot be used for small sized mobile device. To overcome those problems, we propose method to increase DOF by iris image restoration algorithm based on focus value of iris image. When we tested our proposed algorithm with BM-ET100 made by Panasonic, we could increase operation range from 48-53cm to 46-56cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.668-676
• /
• 2018

Most reservoirs in Korea have a low water depth and are small in size. Water pollution of the reservoir is serious because of the organic matter flowing from livestock wastewater, domestic sewage, and farmland. In this study, an attempt was made to improve the water purification effect by replacing the secondary dam installed in the depression area of the agricultural reservoir with the riprap dam. To evaluate the long-term performance, a riprap dam was installed in a reservoir in Gyeonggi province and water purification effect for 36 months was measured. The field test results showed that COD was 14.6%, SS 38.6%, T-N 9.5%, and T-P 11.2%. The concentrations in the influent water exhibited a significant change according to season, and the water purification effect increased with increasing concentration of influent water. The pollutant flowing into the lake from the depression area can be blocked effectively if the secondary riprap dam for water purification is installed in the agricultural reservoir.