DOI QR코드

DOI QR Code

Scale Effects and Field Applications for Continuous Intrusion Miniature Cone Penetrometer

연속관입형 소형콘관입시험기에 대한 크기효과 및 현장적용

  • 윤성수 (삼성물산(주) 건설부문 미주법인) ;
  • 김규선 (삼성물산(주) 건설부문 기술연구센터) ;
  • 이진형 (삼성물산(주) 건설부문 기술연구센터) ;
  • 신동현 (삼성물산(주) 건설부문 기술연구센터)
  • Received : 2012.12.14
  • Accepted : 2013.09.04
  • Published : 2013.11.30

Abstract

Cone penetration tests (CPTs) have been increasingly used for site characterizations. However, the site investigations using CPTs are often limited due to soil conditions depending on the cone size and capacity of the CPT system. The small sectional area of a miniature cone improves the applicability of the CPT system due to the increased capacity of the CPT system. A continuous intrusion system using a coiled rod allows fast and cost effective site investigation. In this study, the performance of the continuous intrusion miniature cone penetration test (CIMCPT) system has been evaluated by comparison tests with the standard CPT system at several construction sites in Korea. The results show that the CIMCPT system has a same performance with the CPT system and has advantages on the mobility and applicability. According to field verification tests for scale effect evaluation, the cone tip resistance evaluated by CIMCPT overestimates by 10% comparing to standard CPTs. A crawler mounted with the CIMCPT system has been implemented to improve accessibility to soft ground, and has shown improvement over the truck type CIMCPT system. Therefore, the improved CIMCPT system can be utilized as a cost effective and highly reliable soil investigation methodology to detect the depth of soft ground and to evaluate soil classification.

콘관입시험은 현장조사 시험법으로 사용 빈도가 증가되고 있다. 그러나 콘관입시험은 콘크기와 용량 등에 따라 적용 가능한 현장조건이 제한되는 단점이 있다. 소형콘의 감소된 단면적은 시스템 용량을 증대시켜 적용성을 향상시킬 수 있으며, 코일식 롯드를 이용한 연속관입 시스템은 신속하고 경제적인 지반조사를 가능하게 한다. 본 연구에서는 국내 여러 현장에서 연속관입형 소형콘관입시험 시스템의 성능을 표준 콘관입시험 시스템과의 비교시험을 통하여 평가하였다. 소형콘관입시험 장비는 기존의 표준콘관입시험 장비와 비교하여 지반정수 도출 및 지반분류에 동일한 성능을 발휘하는 것을 확인하였으며, 장비의 기동성 및 적용대상 토질 확대 등의 장점을 나타내는 것으로 평가되었다. 크기효과 검증을 위한 현장시험 결과 기존 시험 방법에 비해 콘저항력의 경우는 약 10% 과대평가하는 것으로 나타났다. 차량 형태의 조사장비는 표층이 연약하거나 진입이 어려운 경우에는 조사의 한계가 있으므로, 궤도장치에 탑재된 연속관입형 소형콘관입시험 시스템으로 개선하여 적용성을 확대시켰다. 따라서 개선된 연속관입형 소형콘관입시험 시스템은 연약지반 심도탐지 및 흙분류시 경제적이고 신뢰성 높은 지반조사 방법으로 활용할 수 있다.

Keywords

References

  1. Abu-Farsakh, M. Y., Zhang, Z., Tumay, M. T. and Morvant, M. (2008). "Computerized cone penetration test for soil classification: Development of MS-Windows Software." Journal of the Transportation Research Board, TRR 2053, National Research Council, Washington, D.C., pp. 47-64.
  2. Hird, C. C., Johnson, P. and Sills, G. C. (2003). "Performance of miniature piezocones in thinly layered soils." Geotechnique, Vol. 53, No. 10, pp. 885-900. https://doi.org/10.1680/geot.2003.53.10.885
  3. Kim, R., Cho, Y., Yoon, S. and Lee, W. (2008). "Effect of the cone's size on the tip resistance of sandy soil." Proc. of the 34th KSCE Conference 2008, pp. 3897-3901 (in Korean).
  4. Kurup, P. U. and Tumay, M. T. (1998). "Calibration of a miniature cone penetrometer for highway applications." Transportation Research Record, No. 1614, pp. 8-14.
  5. Kurup, P. U. and Tumay, M. T. (1999). "Continuous intrusion miniature cone penetration test system for transportation applications." Transportation Research Record, No. 1652, pp. 228-235.
  6. Lima, D. C. and Tumay, M. T. (1991). "Scale effects in cone penetration tests." Proc. of the Geotechnical Engineering Congress 1991, ASCE, Boulder, CO, Vol. 1, pp. 38-51.
  7. Lunne, T., Robertson, P. K. and Powell J. J. M. (1997). Cone penetration testing in geotechnical practice, Chapman & Hall, London.
  8. Powell, J. J. M. and Quarterman, R. S. T. (1988). "Interpretation of cone penetration tests in clays, with particular reference to rate effects." Proc. of the First International Symposium on Penetration, Orlando, FL, Vol. 2, pp. 903-910.
  9. Robertson, P. K. and Campanella, R. G. (1988). Guidelines for Geotechnical Design Using CPT and CPTU, University of British Columbia, Vancouver, Department of Civil Engineering, Soil Mechanics Series 120.
  10. Titi, H. H. and Morvant, M. (2001). "Implementation of miniature cone penetrometer in roadway design and construction." Journal of the Transportation Research Board, TRR 1755, National Research Council, Washington, D.C., pp. 60-68.
  11. Titi, H. H., Mohammad, L. N. and Tumay, M. T. (2000). "Miniature cone penetration tests in soft and stiff clays." Geotechnical Testing Journal, Vol. 23, No. 4, pp. 432-443. https://doi.org/10.1520/GTJ11064J
  12. Tumay, M. T. and Kurup, P. U. (1997). Calibration and implementation of miniature electronic cone penetrometers for road and highway design and construction, Louisiana Transportation Research Center, Project No. 88-1GT Final Report.
  13. Tumay, M. T. and Kurup, P. U. (1999). A continuous intrusion miniature cone penetration test system for transportation applications, Louisiana Transportation Research Center, Project No. 96-3GTX Final Report.
  14. Tumay, M. T. and Kurup, P. U. (2001). "Development of a continuous intrusion miniature cone penetration test system for subsurface explorations." Soils and Foundations, Vol. 41, No. 6, pp. 129-138.
  15. Yoon, G. and Lee, K. (2004). Applications of cone penetration test for geotechnical design, Goomibook (in Korean).
  16. Yoon, S. (2009). "Miniature cone penetration tests for detecting the depth of a clay layer." Proc. of the 35th KSCE Conference 2009, pp. 1930-1933 (in Korean).
  17. Yoon, S., Hwang, D., Kim, J. and Ji, W. (2010). "Case studies on the field application of miniature CPT's in South Korea." Proc. of the KGS Fall National Conference 2010, pp. 269-280 (in Korean).
  18. Yoon, S., Ji, W., Kim, J. and Kim, R. (2009). "The field application of miniature cone penetration test system in Korea." Proc. of the KGS Spring National Conference 2009, pp. 349-360 (in Korean).
  19. Zhang, Z. and Tumay, M. T. (1999). "Statistical to fuzzy approach toward CPT soil classification." Journal of Geotechnical and Geoenvironmental Engineering, Vol. 125, No. 3, pp. 179-186. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:3(179)