• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1301-1308
• /
• 2012

In this paper, the low-power clock generator synchronized with the AC power signal using the adiabatic dynamic CMOS logic (ADCL) buffer is proposed for adiabatic logics. To reduce the power dissipation in conventional CMOS logic and to maintain adiabatic charging and discharging with low power for the ADCL, the clock signal of logic circuits should be synchronized with the AC power source. The clock signal for an adiabatic charging and discharging with the AC power signal was generated with the designed Schmitt trigger circuit and ADCL frequency divider using the ADCL buffer. From the simulation result, the power consumption of the proposed clock generator was estimated with approximately 1.181uW and 37.42uW at output 3kHz and 10MHz respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.42-45
• /
• 2002

A low power SDRAM output buffer with reduced power line noise and feedthrough current is presented. In multi I/O SDRAM output buffer, feedthrough current as well as the corresponding power dissipation are reduced utilizing proposed undershoot protection circuits. Ground bounce is minimized by the pull down driver using intelligent feedback scheme. Ground bounce noise is reduced by 66.3% and instantaneous and average power are reduced by 27.5% and 11.4%, respectively.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.52-58
• /
• 2001

This paper describes a TTL-to-CMOS input buffer of an SRAM which dissipates a small operating power dissipation. The input buffer utilizes a transistor structure with latch circuit controlled by a internal activation clock pulse. During the low state of that pulse, input buffer is disabled to eliminate dc current. Otherwise, the input buffer operates normally. Simulation results showed that the power-delay product of the purposed input buffer is reduced by 33.7% per one input.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.3
• /
• pp.151-156
• /
• 2015

Recently, an embedded flash memory has been widely used for the Internet of Things(IoT). Due to its nonvolatility, economical feasibility, stability, low power usage, and fast speed. With respect to power consumption, the embedded memory system must consider the most significant design factor. The objective of this research is to design high performance and low power NAND flash memory architecture including a dual buffer as a replacement for NOR flash. Simulation shows that the proposed NAND flash system can achieve better performance than a conventional NOR flash memory. Furthermore, the average memory access time of the proposed system is better that of other buffer systems with three times more space. The use of a small buffer results in a significant reduction in power consumption.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.462-466
• /
• 2010

A new buffer cache management scheme that aims at reducing power consumption in mixed HDD and NAND flash memory storage systems is presented. The proposed scheme reduces power consumption by considering different energy-consumption rate of storage devices, I/O operation type (read or write), and reference potential of cached blocks in terms of both recency and frequency. Simulation shows that the proposed scheme reduces power consumption by 18.0% on average and up to 58.9%.

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.180-181
• /
• 1999

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.686-689
• /
• 2003

This paper describes two kind of new concept for low power consumption for small area TFT-LCDs. First, the proposed analog buffer could reduce the static current by adopting new scheme. Second, new data driver structure reduced DC power consumption by reducing the number of operational amplifier (op-amp). As simulation results of Hspice, the quiescent current of proposed analog buffer is less than $0.8{\mu}A$ and the DC power consumption is reduced about $40{\sim}50%$ compared with conventional ones.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.4
• /
• pp.201-207
• /
• 2012

Currently, NAND Flash memory has been widely used in consumer storage devices due to its non-volatility, stability, economical feasibility, low power usage, durability, and high density. However, a high capacity of NAND flash memory causes the high power consumption and the low performance. In the convention memory research, a hierarchical filter mechanism can archive an effective performance improvement in terms of the power consumption. In order to attain the best filter structure for NAND flash memory, we selected a direct-mapped filter, a victim filter, a fully associative filter and a 4-way set associative filter for comparison in the performance analysis. According to the results of the simulation, the fully associative filter buffer with a 128byte fetching size can obtain the bet performance compared to another filter structures, and it can reduce the energy*delay product(EDP) by about 93% compared to the conventional NAND Flash memory.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2010

This paper presents a low noise CMOS regulator for a low power capacitive sensor interface in a $0.5{\mu}m$ CMOS standard technology. Proposed LDO regulator circuit consist of a voltage reference block, an error amplifier and a new buffer between error amplifier and pass transistor for a good output stability. Conventional source follower buffer structure is simple, but has a narrow output swing and a low S/N ratio. In this paper, we use a 2-stage wide band OTA instead of source follower structure for a buffer. From SPICE simulation results, we got 0.8 % line regulation and 0.18 % load regulation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.2
• /
• pp.140-145
• /
• 2002

A new CMOS buffer removing short-circuit power consumption is proposed. The gate-driving signal of the pull-up(pull-down) transistor at the output is controlled by delayed internal signal to get tri-state output momentarily by shunting off the path of the short-circuit current. The SPICE simulation results verified the operation of the proposed buffer and showed the enhancement of the power-delay product at 3.3V supply voltage about 42% comparing to the conventional tapered CMOS buffer(1).