• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.9-14
• /
• 1998

One of the areas in the continuous casting process that up to this point, has not been definitively instrumented is a method of reliably locating the part of a continuously cast strand that remains liquid for a period after the outer portion has solidified. To solve the problem. Electromagnetic Trandsducers(EMAT) which operate across an air gap without the need for a coupling medium has been developed. The system was designed to employ a through transmission technique which enhanced the signal-to-noise ratio. The Al 75$\times$75mm and 75$\times$100mm simulators with 2, 4, 8, 16, 32 mm hole respectively has been produced in order to verify the developed EMAT system and to measure to liquid core in continuous casting strand. The system developed can be employed for the optimization of torch cutting speed and for the final cut length of the bloom as well as calculation of average bloom temperature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.1005-1011
• /
• 2011

In this paper, we present a marching-on-in-degree(MOD) finite difference method(FDM) based on the Helmholtz wave equation for analyzing transient electromagnetic responses in a general dispersive media. The two issues related to the finite difference approximation of the time derivatives and the time consuming convolution operations are handled analytically using the properties of the Laguerre functions. The basic idea here is that we fit the transient nature of the fields, the flux densities, the permittivity with a finite sum of orthogonal Laguerre functions. Through this novel approach, not only the time variable can be decoupled analytically from the temporal variations but also the final computational form of the equations is transformed from finite difference time-domain(FDTD) to a finite difference formulation through a Galerkin testing. Representative numerical examples are presented for transient wave propagation in general Debye, Drude, and Lorentz dispersive medium.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2348-2350
• /
• 2005

LHM (Left Handed Material)은 특정 주파수 범위에서 음의 유전율과 투자율을 가지는 물질이며 유효 유전율과 투자율은 분산 특성을 가지고 로렌츠(Lorentz) 물질과 비슷한 형태를 가진다. 본 논문에서는 FDTD (Finite Difference Time Domain) 법을 바탕으로 한 PLRC (Piecewise Linear Recursive Convolution) 법을 이용하여 LHM 내의 유효 전파특성을 모의한다. 모의실험 결과는 음의 유전율과 투자율을 가지는 주파수 범위를 보여준다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.977-982
• /
• 2004

In this paper, a dispersive anisotropic perfectly matched layer(APML) is proposed using piecewise linear recursive convolution(PLRC) for finite difference time domain(FDTD) methods. This proposed APML can be utilized for the analysis of a nonlinear dispersive medium as absorbing boundary condition(ABC). The formulation is simple modification to the original AMPL and can be easily implemented. Also it has some advantages of the PLRC approach-fast speed, low memory cost, and easy formulation of multiple pole susceptibility. We applied this APML to 2-D propagation problems in dispersive media such as Debye and Lorentz media The results showed good absorption at boundaries.

• Journal of The Korean Astronomical Society
• /
• v.49 no.3
• /
• pp.83-92
• /
• 2016

The Toothbrush radio relic associated with the merging cluster 1RXS J060303.3 is presumed to be produced by relativistic electrons accelerated at merger-driven shocks. Since the shock Mach number inferred from the observed radio spectral index, M_radio ≈ 2.8, is larger than that estimated from X-ray observations, M_X ≲ 1.5, we consider the re-acceleration model in which a weak shock of M_s ≈ 1.2 - 1.5 sweeps through the intracluster plasma with a preshock population of relativistic electrons. We find the models with a power-law momentum spectrum with the slope, s ≈ 4.6, and the cutoff Lorentz factor, γ_e,c ≈ 7-8×10⁴ can reproduce reasonably well the observed profiles of radio uxes and integrated radio spectrum of the head portion of the Toothbrush relic. This study confirms the strong connection between the ubiquitous presence of fossil relativistic plasma originated from AGNs and the shock-acceleration model of radio relics in the intracluster medium.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.15-18
• /
• 2004

LHM (Left Handed Material)은 특정 주파수 범위에서 음의 유전율과 투자율을 가지는 물질이다. 이 물질의 유효 유전율과 투자율은 분산 특성을 가지며 로렌츠 (Lorentz) 물질과 비슷한 형태를 가진다. 본 논문에서는 FDTD (Finite Difference Time Domain) 법을 바탕으로 한 PLRC (Piecewise Linear Recursive Convolution) 법을 이용하여 LHM 내의 유효 전파특성을 모의한다. 모의실험 결과는 음의 유전율과 투자율을 가지는 주파수 범위를 보여준다.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.322-329
• /
• 2015

This paper presents a new overlapped coilgun configuration to launch medium weight projectiles. The proposed configuration consists of a two-stage coilgun with overlapped coil covers with spacing between them. The theoretical operation of a multi-stage coilgun is introduced, and a transient simulation was conducted for projectile motion through the launcher by using a commercial transient finite element software, ANSOFT MAXWELL. The excitation circuit design for each coilgun is reported, and the results indicate that the overlapped configuration increased the exit velocity relative to a non-overlapped configuration. Different configurations in terms of the optimum length and switching time were attempted for the proposed structure, and all of these cases exhibited an increase in the exit velocity. The exit velocity tends to increase by 27.2% relative to that of a non-overlapped coilgun of the same length.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.153-158
• /
• 2016

This paper aims to discuss the Non Darcy boundary layer flow of non-conducting viscous fluid with magnetic ferroparticles over a permeable linearly stretching surface with ohmic dissipation and mixed convective heat transfer. A magnetic dipole is applied "a" distance below the surface of stretching sheet. The governing equations are modeled. Similarity transformation is used to convert the system of partial differential equations to a system of non-linear but ordinary differential equations. The ODEs are solved numerically. The effects of sundry parameters on the flow properties like velocity, pressure, skin-friction coefficient and Nusselt number are presented. It is deduced the frictional resistance of Lorentz force decreases with stronger electric field and the trend reverses for temperature. Skin friction coefficient increase with increase in ferromagnetic interaction parameter. Whereas, Nusselt number decrease.

• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1840-1844
• /
• 2018

Working in an arbitrary Lorentz frame, we address the question of formulating the covariant variational principle for classical, single-particle, dissipative, relativistic mechanics. First, within a Minkowskian geometry, the basic properties of the proper time ${\tau}$ and the covariant velocity $u_{\mu}$ are recapitulated. Next, using a scalar function ${\psi}(x)$ and its negative derivatives ${\varphi}_{\mu}{^{\prime}}s$, we construct a covariant Lagrangian ${\Lambda}$ that generalizes the famous Bateman-Caldirola-Kanai Lagrangian of nonrelativistic frictional mechanics. Finally, we propose a deterministic model for ${\psi}$ (involving the drag coefficient A) whose explicit solution leads to relativistic damped Rayleigh motion in the rest frame of the medium.

• Advances in materials Research
• /
• v.12 no.3
• /
• pp.243-261
• /
• 2023

This study aims to analyze the mechanical buckling behavior of a single-walled carbon nanotube (SWCNT) integrated with a one-parameter elastic medium and modeled as a Kerr-type foundation under a longitudinal magnetic field. The structure is considered homogeneous and therefore modeled utilizing the nonlocal first shear deformation theory (NL-FSDT). This model targets thin and thick structures and considers the effect of the transverse shear deformation and small-scale effect. The Kerr model describes the elastic matrix, which takes into account the transverse shear strain and normal pressure. Using the nonlocal elastic theory and taking into account the Lorentz magnetic force acquired from Maxwell relations, the stability equation for buckling analysis of a simply supported SWCNT under a longitudinal magnetic field is obtained. Moreover, the mechanical buckling load behavior with respect to the impacts of the magnetic field and the elastic medium parameters considering the nonlocal parameter, the rotary inertia, and transverse shear deformation was examined and discussed. This study showed useful results that can be used for the design of nano-transistors that use the buckling properties of single-wall carbon nanotubes(CNTs) due to the creation of the magnetic field effect.