• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.19-27
• /
• 1982

Minimization of total routing and number of cuts has been adopted for the placement problem in LSI and printed wire board as the object function, recently. Although it is considered that in the general situation this object function reflects the final goal which is wiring of 100% of layout, it often seems to be insufficient because it does not exhibit partial wire congestion. This paper introduces a new concept called the wire congestion of segestion to get the partial wire congestion and proposes the object function to minimize the wire congestion of segmests. In order to optimize this object function, an effective heuristic algorithm is also suggestsl Experimental results show that this algorithm sustains its efficiency. The experimental consequences point out that if the total routing length is short, maximum wire congestion of segment is small and vice versa. Therefore control parameter, that is, congestion parameter, which mintnizes total length and concurrently reduces maximal wire congestion of segment, is obtained by experiment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.109-119
• /
• 2016

In South Korea the need of sustainably managing development on forest lands has required to develop a new approach to estimating environmental impacts on forest surrounding development sites in a scientific manner. As for forest-related development, two types of development were selected: golf courses and industrial complexes. Using Fragstats 4.2, the fragmentation effects and patterns of each type by forest area within project sites and buffer zones ranging from the outside of project sites up to 2,000 meters were analyzed. As a result, golf courses were strongly related to a group of fragmentation indexes: CA, NP, PD, TE, LSI, TCA, NDCA and CONNECT, whereas industrial complexes were associated with CA, NP, PD, TE, LSI and CONNECT. Among them, NP, LSI, TCA and NDCA of golf courses were considered as representative indexes reflecting the average impact ranges of each sub-group by forest area, and focussing on the size of core areas. In the case of industrial complexes, PD, TE and LSI were the representatives, vulnerable to the composition of given landscape. For two case studies, one for golf courses and the other for industrial complexes, they showed there existed a difference between the average of a group and the individual results. Therefore, to minimize the variations in impact range within a group, it is needed to analyze more individual cases. This study proved there was a distinction between project types in terms of the range of environmental impact. To effectively and comprehensively manage forest development, further research on analyzing other development types related to forests with more cases is needed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1807-1824
• /
• 2015

As the technologies advance, mobile peer-to-peer (MP2P) networks or systems become one of the major ways to share resources and information. On such a system, the information retrieval (IR), including the development of scalable infrastructures for indexing, becomes more complicated due to a huge increase on the amount of information and rapid information change. To keep the systems on MP2P networks more reliable and consistent, the index structures need to be updated frequently. For a semantic IR system, the index structure is even more complicated than a classic IR system and generally has higher update cost. The most well-known indexing technique used in semantic IR systems is Latent Semantic Indexing (LSI), of which the index structure is generated by singular value decomposition (SVD). Although LSI performs well, updating the index structure is not easy and time consuming. In an MP2P environment, which is fully distributed and dynamic, the update becomes more challenging. In this work, we consider how to update the sematic index generated by LSI and keep the index consistent in the whole MP2P network. The proposed Concept Space Update (CSU) protocol, based on distributed 2-Phase locking strategy, can effectively achieve the objectives in terms of two measurements: coverage speed and update cost. Using the proposed effective synchronization mechanism with the efficient updates on the SVD, re-computing the whole index on the P2P overlay can be avoided and the consistency can be achieved. Simulated experiments are also performed to validate our analysis on the proposed CSU protocol. The experimental results indicate that CSU is effective on updating the concept space with LSI/SVD index structure in MP2P semantic IR systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.776-783
• /
• 2009

Current-cut circuit is an effective method to obtain low power consumption in wireless communication systems as high speed OFDM. For the operation of current-mode FFT LSI with analog signal processing essentially requires current-mode serial-to-parallel/parallel-to-serial converter with multi input and output structure. However, the Hold-mode operation of current-mode serial-to-parallel/parallel-to-serial converter has unnecessary power consumption. We propose a novel current-mode serial-to-parallel/parallel-to-serial converter with current-cut circuit and full chip simulation results agree with experimental data of low power consumption. The proposed current-mode serial-to-parallel/parallel-to-serial converter promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.339-344
• /
• 2017

A novel structure of phase locked loop (PLL) which has small size and fast locking time with Early-late detector, Duty-rate modulator, and Lock status indicator (LSI) is proposed in this paper. The area of loop filter usually occupying the larger portion of the chip is minimized using a single small capacitor. While the conventional PLL with a single capacitor loop filter cannot work stably, the proposed PLL with two charge pumps works stably because the output voltage waveform of the proposed a single capacitor loop filter is the same as the output voltage waveform of the conventional 2nd-order loop filter. The two charge pumps are controlled by the Early-late detector which detects early-late status of UP and DN signals, and Duty-rate modulator which generates a steady duty-rate signal. Fast locking time is achieved using LSI. It has been simulated and proved by HSPICE in a CMOS $0.18{\mu}m$ 1.8V process.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.27-33
• /
• 2010

We have successfully demonstrated a high-pin-count and thin embedded-LSI package to realize next generation's mobile terminals. The following three design key points were applied: (i) Using Cu posts, (ii) Using the coreless structure, (iii) Using a Cu plate as the ground plane. In order to quantitatively determine the contribution of the three points, the five-stage process for reducing the number of metal layers is described by means of the electrical simulation. The point-(i) and (ii) are effective from the viewpoint of the power integrity (PI); that is, these points play important roles in reducing the number of metal layers, and especially the point-(ii) contributes at least twice as the point-(i). The point-(iii) is not effective in the PI, but has a few effects on the signal integrity (SI). For reducing the number of metal layers, we should, at first, pay attention whether the PI characteristics fulfill the specification, and then we should confirm the SI characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.481-482
• /
• 2006

Chemical-mechanical polishing, the dominant technology for LSI planarization, is trending to play an important function in micro-electro mechanical systems (MEMS). However, MEMS CMP process has a couple of different characteristics in comparison to LSI device CMP since the feature size of MEMS is bigger than that of LSI devices. Preliminary CMP tests are performed to understand material removal rate (MRR) with blanket wafer under a couple of polishing pressure and velocity. Based on the blanket CMP data, this paper focuses on the consumable approach to enhance MEMS CMP by the adjustment of slurry and pad. As a mechanical tool, newly developed microstructured (MS) pad is applied to compare with conventional pad (IC 1400-k Nitta-Haas), which is fabricated by micro melding method of polyurethane. To understand the CMP characteristics in real time, in-situ friction force monitoring system was used. Finally, the topography change of poly-si MEMS structures is compared according to the pattern density, size and shape as polishing time goes on.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.36-42
• /
• 2004

In this paper, we compare the vector model performance with the probabilistic model of information system. We use LSI(Latent Semantic Indexing) model for vector model, while Condor information search system that is ready to sell on business is used as a probabilistic model. Each model produces the search results from the original queries and the queries extended by a dictionary definition. We compare those results between two models and find out the vector model is much better than the probabilistic model for the most queries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.573-574
• /
• 2006

The planarization technology of Chemical-mechanical polishing(CMP), used for the manufacturing of multi-layer various material interconnects for Large-scale Integrated Circuits (LSI), is also readily adaptable as an enabling technology in MicroElectroMechanical System (MEMS) fabrication, particularly polysilicon surface micromachining. However, general LSI device CMP has partly distinction aspects, the pattern scale and material sorts in comparison with MEMS CMP. This study performed preliminary CMP tests to identify slurry characteristic used in general IC device. The experiment result is possible to verify slurry characteristic in MEMS structure material.