• Transactions on Electrical and Electronic Materials
• /
• v.17 no.3
• /
• pp.143-145
• /
• 2016

In order to find suitable source and drain (S/D) electrodes for amorphous InGaZnO thin film transistors (a-IGZO TFTs), the specific contact resistance of interface between the channel layers and various S/D electrodes, such as Ti/Au, a-IZO and multilayer of a-IGZO/Ag/a-IGZO, was investigated using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes had good performance and low contact resistance due to the homo-junction with channel layer. The stability was measured with different electrodes by a positive bias stress test. The result shows the a-IGZO TFTs with a-IGZO/Ag/a-IGZO electrodes were more stable than other devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.119-122
• /
• 2008

In this paper, we describe the current status and issues of the oxide thin-film transistors (OTFTs), which attract much attention as an emerging new backplane technology replacing conventional silicon-based TFTs technologies. First, the unique benefits of OTFTs will be presented as a backplane for large-sized AMOLED including note-book PC, second TV and HD-TV. And then, the state-of-the-art transistor performance and uniformity characteristics of OTFTs will be highlighted. The obtained a-IGZO TFTs exhibited the field-effect mobility of $18\;cm^2/Vs$, threshold voltage of 1.8 V, on/off ratio of $10^9$, and subthreshold gate swing of 0.28 V/decade. In addition, the world largest-sized 12.1-inch WXGA active-matrix organic light emitting diode (AMOLED) display is demonstrated using indium-gallium-zinc oxide (IGZO) TFTs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.8-8
• /
• 2009

Thin-film transistors (TFTs) were fabricated using amorphous indium gallium zinc oxide (a-IGZO) channels by rf-magnetron sputtering at room temperature. We have studied the effect of oxygen partial pressure on the threshold voltage($V_{th}$) of a-IGZO TFTs. Interestingly, the $V_{th}$ value of the oxide TFTs are slightly shifted in the positive direction due to increasing $O_2$ ratio from 1.2 to 1.8%. The device performance is significantly affected by varying $O_2$ ratio, which is closely related with oxygen vacancies provide the needed free carriers for electrical conduction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.10
• /
• pp.648-652
• /
• 2014

We have investigated the effect of electrical properties of amorphous InGaZnO thin film transistors (a-IGZO TFTs) by post thermal annealing in $O_2$ ambient. The post-annealed in $O_2$ ambient a-IGZOTFT is found to be more stable to be used for oxide-based TFT devices, and has better performance, such as the on/off current ratios, sub-threshold voltage gate swing, and, as well as reasonable threshold voltage, than others do. The interface trap density is controlled to achieve the optimum value of TFT transfer and output characteristics. The device performance is significantly affected by adjusting the annealing condition. This effect is closely related with the modulation annealing method by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1199-1202
• /
• 2008

High mobility bottom gate thin film transistors (TFTs) with an amorphous gallium tin zinc oxide (a-GSZO) channel layer have been produced by rf magnetron cosputtering using a gallium zinc oxide (GZO) and tin (Sn) targets. The effect of the post annealing temperatures ($200^{\circ}C$, $250^{\circ}C$ and $300^{\circ}C$) was evaluated and compared with two series of TFTs produced at room temperature and $150^{\circ}C$ during the channel deposition. From the results it was observed that the effect of pos annealing is crucial for both series of TFTs either for stability as well as for improving the electrical characteristics. The a-GSZO TFTs operate in the enhancement mode (n-type), present a high saturation mobility of $24.6\;cm^2/Vs$, a subthreshold gate swing voltage of 0.38 V/decade, a turn-on voltage of -0.5 V, a threshold voltage of 4.6 V and an $I_{ON}/I_{OFF}$ ratio of $8{\times}10^7$, satisfying all the requirements to be used in active-matrix backplane.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.47-49
• /
• 2012

In this paper, we investigated the anomalous hump in the bottom gate staggered a-IGZO TFTs. During the positive bias stress, a positive threshold voltage shift was observed in the transfer curve and an anomalous hump occurred as the stress time increased. The hump became more serious in higher gate bias stress while it was not observed under the negative bias stress. The analysis of constant gate bias stress indicated that the anomalous hump was influenced by the migration of positively charged mobile interstitial zinc ion towards the top side of the a-IGZO channel layer.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.594-600
• /
• 2014

A threshold voltage compensation pixel circuit was developed for active-matrix organic light emitting diodes (AMOLEDs) using amorphous indium-gallium-zinc-oxide thin-film transistors (a-IGZO-TFTs). Oxide TFTs are n-channel TFTs; therefore, we developed a circuit for the n-channel TFT characteristics. The proposed pixel circuit was verified and proved by circuit analysis and circuit simulations. The proposed circuit was able to compensate for the threshold voltage variations of the drive TFT in AMOLEDs. The error rate of the OLED current for a threshold voltage change of 3 V was as low as 1.5%.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.539-542
• /
• 2011

Thin-film transistors (TFTs) are fabricated using an amorphous indium gallium zinc oxide (a-IGZO) channel layer by rf-magnetron sputtering. Oxygen partial pressure significantly changed the transfer characteristics of a-IGZO TFTs. Measurements performed on a-IGZO TFT show the change of threshold voltage in the transistor channel layer and electrical properties with varying $O_2$ ratios. The device performance is significantly affected by adjusting the $O_2$ ratio. This ratio is closely related with the modulation generation by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• Journal of Information Display
• /
• v.11 no.4
• /
• pp.160-164
• /
• 2010

Organic light-emitting devices (OLEDs) have shown superior characteristics and are expected to dominate the nextgeneration flat-panel displays. Active-matrix organic light-emitting diode (AMOLED) displays, however, have stringent demands on the performance of the backplane. In this paper, the development of thin-film transistors (TFTs) based on indium gallium zinc oxide (IGZO) on both Gen 1 and 6 glasses, and their decent characteristics, which meet the AMOLED requirements, are shown. Further, several display prototypes (e.g., 2.4" AMOLED, 2.4" transparent AMOLED, and 32" AMLCD) using IGZO TFTs are demonstrated to confirm that they can indeed be strong candidates for the next-generation TFT technology not only of AMOLED but also of AMLCD (active-matrix liquid crystal display).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1002-1004
• /
• 2009

Solution-processed indium-gallium-zinc-oxide thin-film transistors were fabricated by sol-gel method. By a combinatorial study of InGaZnO multi-component system, optimum molar ratio of In, Ga, and Zn has been selected. By adjusting the In:Ga:Zn molar ratio, TFTs with field-effect mobility of 0.5 ~ 1.5 $cm^2$/V-s, threshold voltage of -5 ~ 5 V, and subthreshold slope of 1.5 ~ 2.5 V/decade were achieved.