• 전자공학회논문지A
• /
• 제30A권2호
• /
• pp.36-45
• /
• 1993

The n-channel MOSFETs with gate-$n^{-}$S/D overlapped structure have been fabricated by ITLDD(inverse-T gate lightly doped drain) technology. The gate length(L$_{mask}$) was 0.8$\mu$m. The degradation effects of hot carriers injected into the gate oxide were analyzed in terms of threshold voltage, transconductance and drain current variations. The degradation dependences on the gate voltage and drain voltage were characterized. The devices with higher n-concentration showed higher resistivity against the hot carrier injection. As the results of investigating the lifetime of the device, the lifetime showed longer than 10 years at V$_{d}$ = 5V for the overlapped devices with the implantation of an phosphorus dose of 5$\times$10$^{13}$ cm$^{-2}$ and an energy of 80 keV in the n$^{-}$resion.

• Journal of information and communication convergence engineering
• /
• 제11권4호
• /
• pp.288-292
• /
• 2013

In this paper, a carbon implant is investigated in detail from the perspectives of performance advantages and side effects for the thick n-type metal-oxide-semiconductor field-effect transistor (n-MOSFET). Threshold voltage ($V_{th}$) adjustment using a carbon implant significantly improves the $V_{th}$ mismatch performance in a thick (3.3-V) n-MOS transistor. It has been reported that a bad mismatch occurs particularly in the case of 0.11-${\mu}m$ $V_{th}$ node technology. This paper investigates a carbon implant process as a promising candidate for the optimal $V_{th}$ roll-off curve. The carbon implant makes the $V_{th}$ roll-off curve perfectly flat, which is explained in detail. Further, the mechanism of hot carrier injection lifetime degradation by the carbon implant is investigated, and new process integration involving the addition of a nitrogen implant in the lightly doped drain process is offered as its solution. This paper presents the critical side effects, such as Isub increases and device performance shifts caused by the carbon implant and suggests an efficient method to avoid these issues.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권2호
• /
• pp.191-197
• /
• 2016

In this paper, we investigated the hotcarrier injection (HCI) mechanism, one of the most important reliability issues, in 10 nm node Input/Output (I/O) bulk FinFET. The FinFET has much intensive HCI damage in Fin-bottom region, while the HCI damage for planar device has relatively uniform behavior. The local damage behavior in the FinFET is due to the geometrical characteristics. Also, the HCI is significantly affected by doping profile, which could change the worst HCI bias condition. This work suggested comprehensive understanding of HCI mechanisms and the guideline of doping profile in 10 nm node I/O bulk FinFET.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.157-163
• /
• 2002

A new flash EEPROM device with p^＋ poly-Si control gate and n^＋ poly-Si floating side gate was fabricated and characterized. The n^＋ poly-Si gate is formed on both sides of the p^＋ poly-Si gate, and controls the underneath channel conductivity depending on the number of electron in it. The cell was programmed by hot-carrier-injection at the drain extension, and erased by direct tunneling. The proposed EEPROM cell can be scaled down to 50 nm or less. Shown were measured programming and erasing characteristics. The channel resistance with the write operation was increased by at least 3 times.

• 센서학회지
• /
• 제31권1호
• /
• pp.41-44
• /
• 2022

In this study, we have fabricated and characterized vertical double-gate (DG) InGaAs tunnel field-effect-transistors (TFETs) with Al₂O₃/HfO₂ = 1/5 nm bi-layer gate dielectric by employing a top-down approach. The device exhibited excellent characteristics including a minimum subthreshold swing of 60 mV/decade, a maximum transconductance of 141 µS/㎛, and an on/off current ratio of over 10³ at 20℃. Although the TFETs were fabricated using a dry etch-based top-down approach, the values of DIBL and hysteresis were as low as 40 mV/V and below 10 mV, respectively. By evaluating the effects of constant voltage and hot carrier injection stress on the vertical DG InGaAs TFET, we have identified the dominant charge trapping mechanism in TFETs.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.869-873
• /
• 2001

The effects of alternate bias stress on p-channel poly-Si TFT\`s has been systematically investigated. We alternately applied positive and negative bias stress on p-channel poly-Si TFT\`s, device Performance(V$\_$th/, g$\_$m/, leakage current, S-slope) are alternately appeared to be increasing and decreasing. It has been shown that device performance degrade under the negative bias stress while improve under the positive bias stress. This effects have been related to the hot carrier injection into the gate oxide rather than the generation of defect states within the poly-Si/SiO$_2$ interface under alternate bias stress.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.158-166
• /
• 2001

Based on uniform hot carrier injection (optically assisted electron injection) across the $Si-SiO_2$ interface into the gate insulator of n-channel IGFETs, the threshold voltage shifts associated with electron injection of $1.25{\times}l0^{16}{\;}e/\textrm{cm}^2 between 0.5 and 7 MV/cm were found to decrease from positive to negative values, indicating both a decrease in trap cross section ($E_{ox}{\geq}1.5 MV/cm$) and the generation of FPC $E_{ox}{\geq}5{\;}MV/cm$). It was also found that FNC and large cross section NETs were generated for $E_{ox}{\geq}5{\;}MV/cm$. Continuous, uniform low-field (1MV/cm) electron injection up to $l0^{19}{\;}e/\textrm{cm}^2 is accompanied by a monatomic increase in threshold voltage. It was found that the data could be modeled more effectively by assuming that most of the threshold voltage shift could be ascribed to generated bulk defects which are generated and filled, or more likely, generated in a charged state. The injection method and conditions used in terms of injection fluence, injection density, and temperature, can have a dramatic impact on what is measured, and may have important implications on accelerated lifetime measurements.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.489-492
• /
• 1999

The effects of alternate bias stress on p-channel poly-Si TPT's has been systematically investigated. It has been shown that the application of alternate bias stress affects device degradation for the negative bias stress as well as device improvement for the positive bias stress. This effects have been related to the hot carrier injection into the gate oxide rather than the generation of defect states within the poly-Si/SiO$_2$ under bias stress.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.328.1-328.1
• /
• 2014

MOSFET degradation의 대부분은 hot-carrier injection에 의한 interface state (Dit)의 생성에서 비롯되며 따라서 본 연구에서는 신뢰성에 대한 한 가지 방법으로 Charge pumping method를 이용하여 MOSFET의 interface trap(Dit)의 변화를 측정하였다. 소스와 드레인을 ground로 묶고 게이트에 펄스를 인가한 후 Icp를 측정하여 Dit를 추출하였다. 온도를 293~343 K까지 5 K씩 가변했을 때 293K의 Icp(${\mu}A$)는 0.12 nA 313 K는 0.112 nA 343 K는 0.926 nA이며 Dit (cm-1/eV-1)는 $1.61{\times}10^{12}$ (Cm-2/eV-1) $1.49{\times}10^{12}$ (Cm-2/eV-1) $1.23{\times}10^{12}$ (Cm-2/eV-1)이다. 측정결과 Dit는 Icp가 높은 지점에서 추출되며 온도가 높아지게 되면 Icp전류가 낮아지고 Dit가 줄어드는 것을 볼 수 있다. 온도가 올라가게 되면 carrier들이 trap 준위에서 conduction band 위쪽에 이동하게 되어서 interface에 trap되는 양이 작아지게 된다. 그래서 이때 Icp를 이용해 추출한 Dit 는 실제로 trap의 양이 줄어든 것이 아니라 Thermal excess 현상으로 인해 측정되는 Icp의 양이 줄어든 것으로 분석할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.324-327
• /
• 2000

In this paper, the effects of negative and positive bias stress on p-channel poly-Si TFT's fabricated by excimer laser annealing have been investigated After positive and negative bias stress, transcon-ductance(g$_{m}$) is increased because of a reduction of the effective channel length due to the injected electron in the gate oxide. In the positive bias stress, the injection of hole is appeared after stress time of 3600sec and g$_{m}$ is decreased. On the other hand, the gate voltage at the maximum g$_{m}$, S-swing and threshold voltage(V$_{th}$) are decreased because of the interface state generation due to the injection of electrons into the gate oxide.e.ide.e.