• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.468-476
• /
• 1998

The purpose of this study was to observe the morphologic change of dentinal surface, adhesion in interface between dentin and bonding agents, and penetration pattern of resin tags into dentinal tubles according to bonding procedure of ONE-STEP universal adhesive system. Ten extracted human molars were mounted in dental stone and sectioned to expose mid-coronal occlusal dentin and again sectioned tooth crown apically. Specimens were randomly assigned to three groups for dentin conditioning with 32% phoshoric acid, two coats of bonding agents after dentin conditioning, and bond of composite resin. The surfaces of dentin were treated with etch ant and applied bonding agent, and bonded composite resin according to the directions of manufacturer. Specimens which were boned composite were sectioned longitudinally for observing interfaces between resin and dentin. Two of specimens which were sectioned longitudinally were immersed in 6 N HCL for 30 seconds and 1% NaOCL for 12 hours to partially demineralize and deproteinize the dentin substrate. Each specimen was mounted on a brass stub, sputter-coated with gold and observed under SEM. The result were as follows : 1. On the dentinal surface which was conditioned with 32% phosphoric acid. the smear layer was completely removed. orifices of dentinal tubules were opened 3-$5{\mu}m$ wide. and dentinal surface was irregular. 2. On the dentinal surface which was applied ONE-STEP. bonding agent. resin particles were observed on the orifices of dentinal tubules and intertubular dentin. 3. There were close adaptation between dentin and resin and were the pattern which composite invaded into dentin. 4. 1-$3{\mu}m$-wide hybrid layer was visible in the interface between dentin and resin. 5. Long and funnel shaped resin tags were observed in demineralized specimens. and the surfaces of tags were rough.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.274-282
• /
• 2014

In this study, closely spaced Au nanoparticles which are arranged in nanocluster (heptamer) configurations have been employed to design efficient plasmonic subwavelength devices to function at the telecommunication spectrum (${\lambda}$~1550 nm). Utilizing two kinds of nanoparticles, the optical properties of heptamer clusters composed of Au rod and shell particles that are oriented in triphenylene molecular fashion have been investigated numerically, and the cross-sectional profiles of the scattering and absorption of the optical power have been calculated based on a finite-difference time-domain (FDTD) method. Plasmon hybridization theory has been utilized as a theoretical approach to characterize the features and properties of the adjacent and mutual heptamer clusters. Using these given nanostructures, we designed a complex four-branch ($1{\times}4$) Y-shape splitter that is able to work at the near infrared region (NIR). This splitter divides and transmits the magnetic plasmon mode along the mutual heptamers arrays. Besides, as an important and crucial parameter, we studied the impact of arm spacing (offset distance) on the guiding and dividing of the magnetic plasmon resonance propagation and by calculating the ratio of transported power in both nanorod and nanoshell-based structures. Finally, we have presented the optimal structure, that is the four-branch Y-splitter based on shell heptamers which yields the power ratio of 23.9% at each branch, 4.4 ${\mu}m$ decaying length, and 1450 nm offset distance. These results pave the way toward the use of nanoparticles clusters in molecular fashions in designing various efficient devices that are able to be efficient at NIR.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1437-1443
• /
• 2018

In this work, $SnO_2$ modified with reduced graphene oxide (rGO) and carbon nanotubes (CNTs) separately and combined sensitized by using the co-precipitation method and their sensing behavior toward ethanol vapor at room temperature were investigated. An interdigitated electrode (IDE) gold substrate is very expensive compared to a fluorine doped tin oxide (FTO) substrate; hence, we used the latter to reduce the fabrication cost. The structure and the morphology of the studied materials were characterized by using differential thermal analyses (DTA) and thermogravimetric analysis (TGA), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller surface area and Barrett-Joyner-Halenda (BJH) pore size measurements. The studied composites were subjected to ethanol in its gas phase at concentrations from 10 to 200 ppm. The present composites showed high-performance sensitivity for many reasons: the incorporation of $SnO_2$ and CNTs which prevents the agglomeration of rGO sheets, the formation of a 3D mesopourus structure and an increase in the surface area. The decoration with rGO and CNTs led to more active sites, such as vacancies, which increased the adsorption of ethanol gas. In addition, the mesopore structure and the nano size of the $SnO_2$ particles allowed an efficient diffusion of gases to the active sites. Based on these results, the present composites should be considered as efficient and low-cost sensors for alcohol.

• Applied Microscopy
• /
• 제30권1호
• /
• pp.45-59
• /
• 2000

항암제로 널리 사용되는 cis-platin은 백금(platinum) 원소에 염소기와 암모니아기가 수평면의 cis-위치에 결합되어 있는 금속화합물이다. Cis-platin은 인체의 종양에 상당한 항암효과가 있어 악성 난소종양, 두경부의 악성상피종양, 방광암 및 자궁경부암에 효과가 있다고 알려져 있으나 이 약제는 세포의 DNA합성을 억제하는 기능이 이미 밝혀져 있다. 저자는 cis-platin을 가임기의 여성에 투여되었을 때 난관상피 세포를 구성하는 섬모세포의 섬모형성에도 필연적으로 손상 및 억제적인 작용이 있을 것으로 생각되어 섬모의 주요 구성분인 미세소관의 $\alpha-tubulin$과 cis-platin과의 관계를 추구하고자 하였다. 실험동물로는 건강한 체중 $150\sim200gm$의 자성흰쥐를 사용하였으며 estradiol benzoate를 4일간 매일 투여함으로써 섬모세포를 난관내에서 지속적인 활성을 유지시킨 뒤 cis-platin을 실험군의 복강내로 주사한 후 1일, 3일, 5일 및 7일 경과시에 각각 실험동물의 난관에서 상피세포내 $\alpha-tubulin$의 발현을 관찰하기 위해 mouse antirat $\alpha-tubulin$ monoclonal antibody와 2차 항체로 bio-tinylated goat anti-rat IgG를 각각 사용하여 면역조직 화학법을 시행한 후 광학현미경으로 관찰하였다. 또 일부조직은 전자현미경 조직절편을 제작하여 1차 항체로 mouse anti rat $\alpha-tubulin$ monoclonal antibody와 2차 항체로 직경 15nm의 금과립을 결합시킨 goat anti-mouse IgG를 사용하여 면역조직 반응을 시행하고 투과전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. Estradiol benzoate를 4일간 매일 일정량을 투여한 흰쥐의 난관섬모세포내 $\alpha-tubulin$의 면역반응은 estradiol 투여후 1일, 3일 및 5일군에서 강한 반응을 나타내었다. 2. Estradiol beozoate를 4일간 투여한 후 cia-platin을 투여한 흰쥐 난관섬모세포내 $\alpha-tubulin$ 반응은 cis-platin 투여 1일군과 3일군에서 약한 반응을 나타내었으나 제 5일군에서는 강한 반응으로 회복되었다. 3. Cis-platin투여한 후 제 1일 및 3일군의 흰쥐 난관 섬모세포내 $\alpha-tubulin$반응은 첨부세포질에서는 감소되었고 기저체, 섬모등에서는 $\alpha-tubulin$반응이 대조군과 비교하면 변동이 없었다. 이상의 결과로 미루어 난관섬모세포내 $\alpha-tubulin$은 cis-platin투여에 의해 감소되는 것으로 결론 지을 수 있었다.

• Applied Microscopy
• /
• 제24권2호
• /
• pp.78-92
• /
• 1994

Lysozyme has been reported to be present in the secretory granules of the Paneth cell, and lysozyme immunoreactivity has been detected by immunogold method in Paneth cells of the intestine of human, mouse and rat. The present study was aimed at clarifying the intracellular distribution and changes of the lysozyme immunoreactivity in rabbit Paneth cell after common bile duct ligation of rabbit, using the electron microscope immunogold technique. Healthy adult rabbits weighing about 2kg body weight were divided into normal and bile duct ligated groups. Common bile duct ligation was performed aseptically under ether anesthesia. Experimental animals were sacrificed on the 1st, the 3rd, the 5th, the 7th and the 14th day after the operation. Mucosal specimens from the intestinal gland of ileum were fixed in 2.5% glutaraldehyde-1.5% paraformaldehyde, followed by 1% osmium tetroxide, embedded in araldite mixture, cut with LKB-V ultratome. Ultrathin sections were placed on parlodion coated nickel grids (200mesh). The section-bearing grids were floated upside down on the added substance in a moist chamber at room temperature except for the primary antibody step, which was at $4^{\circ}C$. Sections were etched with a saturated solution of sodium m-periodate for 60min. After etching, sections were pretreated with 0.02M tris buffered saline (TBS), pH 8.4, with 1% bovine serum albumin (BSA, Sigma) for 60min, then treated polyclonal rabbit anti-human lysozyme (Dakipatts) diluted 1 : 50 in TBS with 0.1% BSA for 20hr. Subsequently, grids were incubated 60min in biotinylated goat anti rabbit IgG (Amersham) diluted 1 : 100 in TBS with 0.1% BSA. After this, sections were incubated 60min on streptavidin gold G10 (Amersham) diluted 1 : 50 in TBS with 0.1% BSA. After each step, the grids were briefly rinsed with TBS with 0.1% BSA. After the strepavidin gold step, the sections were jet washed with distilled water. Counterstain of the sections performed by uranyl acetate and lead citrate, and observed with JEM 100 CX II electron microscope. Observed results were as follow; 1. Secretory granules of mouse Paneth cells have a lysozyme immunoreactivity and also eosinophil leucocyte of rabbit applied for the positive-control stain, are well labeld with gold particles. 2. Normal rabbit Paneth cells have a lysozyme immunoreactivity restricted on the secretory granules. 3. Amount lysosomes containing myelin figures in the Paneth cells were significantly increased from 5th day after the common bile duct ligation. 4. Immunoreactivity of Paneth cell secretory granules were more activated on the 3rd day after the common bile duct ligation as compared with those of the normal animal. But the lysozyme immunoreactivity were decreased from the 5th day after the common bile duct ligation. 5. Considering the above finding, lysozyme contained Paneth cell are affected following of common bile duct ligation, whereas lysosomes containing myelin-figure do not exhibit any immunoreactive relationship with those of secretory granules.

• Applied Microscopy
• /
• 제32권4호
• /
• pp.385-398
• /
• 2002

골수내 정상적인 혈구형성은 줄기세포와 주위의 미세환경 사이에 일어나는 상호작용에 의해서 좌우된다고 알려져 있다. 이때 미세환경은 성장요소, 기질세포 및 기질세포가 분비한 세포외기질의 복잡한 망상구조로 이루어져 있다. 골수의 세포외기질은 거대분자로 구성되어 있으며 이중 구성요소의 일부인 당단백이 혈구형성의 조절에 주요한 요소가 된다고 많은 학자들이 주장해 왔다. 골수의 기질을 이루고 있는 망상세포, 지방세포, 섬유모세포, 혈관내피세포 및 혈관주위세포 등이 분비하는 세포외기질에 여러종류의 laminin 동형체가 함유되어 있으며 여러 종류의 혈구형성에 주요한 역할을 한다는 연구보고가 있다. 저자는 골수내 종양을 치료하기 위해 빈번히 사용되는 cyclophosphamide가 골수에 미치는 영향을 규명하고자 실험동물의 혈구형성에 영향을 미치는 laminin-1의 발현의 변화를 골수의 기질세포에서 추적하고자 하였다. 건강한 SD계 흰쥐를 실험동물로 사용하여 cyclophosphamide를 체중 kg당 75 mg을 복강내로 1회 투여하고 3일, 1주, 3주 및 5주 후 희생하여 골수조직을 채취하여 면역조직염색법으로 염색하여 laminin-1의 골수내 분포의 변화를 관찰하였고, 일부 조직은 전자현미경표본을 제작하여 1차 항체(rabbit anti-laminin)로 반응시킨 후 직경 12 nm의 금과립이 섞인 제2차 항체(biotinylated goat anti-rabbit IgG)로 다시 반응시키고 uranyl acetate로 단일염색 후 전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. Cyclophosphamide 투여 후 3일 경과군의 흰쥐 골수조직은 정맥동이 확장 되었고, 일부 조직이 괴사되었으며, 혈구형성세포가 감소되었다. 망상조직과 지방세포사이의 조직에서 laminin-1의 면역반응이 강하게 나타났다. 2. Cyclophosphamide 투여 후 1주, 2주 및 5주 투여군의 골수에서 laminin-1의 약한 면역반응이 기질조직에 계속되었고 혈구형성세포의 수는 증가되었다. 3. Laminin-1의 면역반응을 나타내는 금과립은 cyclophosphamide 투여 3일군의 골수 기질세포에서 가장 많은 수가 관찰되었고, 투여 1주, 3주 및 5주군에서는 금과립의 수량이 감소되었다. 이상과 같은 실험결과는 cyclophosphamide가 흰쥐에 투여되었을 때 골수의 혈구형성의 미세환경을 유지하는 기질세포의 laminin-1의 발현을 증가시키는 것으로 생각되었다.

• 지질공학
• /
• 제28권3호
• /
• pp.411-429
• /
• 2018

대영광산(일명 대마광산)은 함금은석영맥을 주 대상으로 채광한 금 은광산으로, 주 광해유발요인은 광물찌꺼기 적치장, 폐석장, 갱구 등 이다. 광물찌꺼기 적치장의 주 오염원소는 As와 Pb이다. 특히 As의 경우 3,424.41~3,803.61 mg/kg로 1지역 대책기준의 45배 이상으로 As에 의한 오염이 매우 심각한 것으로 파악되었다. 오염원소를 보면 오염원인 광물찌꺼기가 고농도의 As를 함유하고 있으며, 오염원의 영향을 받는 주변의 매체에서도 공통적으로 As 오염이 확인되고 있다. 이러한 As 오염은 광물찌꺼기 적치장과의 지형적 상관성이나 이격거리에 따라 오염정도가 달라지는 특성을 나타낸다. 즉 광물찌꺼기 적치장의 상류지역은 하류지역에 비해 오염정도가 낮으며, 광물찌꺼기 적치장의 하류지역에서는 광물찌꺼기 적치장과의 거리가 멀어질수록 오염도가 낮아지는 경향을 보인다. 특히 광물찌꺼기 적치장 주변에서 고농도 오염이 집중적으로 나타나고 있다. 이러한 특성으로 볼 때, 연구지역의 주 오염경로 중의 하나는 광물찌꺼기의 유실로 볼 수 있다. 광물찌꺼기 적치장 하류수계를 따라 As 오염이 확인되었으며, 이러한 현상은 현 하천보다는 구 하천에서 상대적으로 높게 나타나고 있다. 이는 광물찌꺼기 적치장에 대한 유실방지시설을 설치하기 전에 구 하천으로 다량의 광물찌꺼기가 유실되었음을 의미한다. 또한 광물찌꺼기 적치장의 하류수계 농경지에서 하천 범람 시에 영향을 상대적으로 더 받게 되는 하천변 50 m 이내의 농경지 오염도가 50 m 이상의 농경지에 비해 높게 나타났다. 이러한 특성으로 볼 때, 유실된 광물찌꺼기가 하천을 따라 이동하다가 범람에 의해 농경지로 유입되면서 오염이 발생하는 경로도 주 오염경로로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.88-99
• /
• 1999

The purpose of this study was to investigate the physical properties of experimental composite resins made with the spherical and crushed fillers. The 14 experimental composite resins containing 0, 5, 10, 15, 20 and 25%(w/w) in spherical filler group and 0, 10, 20, 30, 40, 50, 60 and 70%(w/w) in crushed filler group, incorporated in a Bis-GMA matrix (Aldrich Co., USA), were made with 1% ${\gamma}$-methoxy silane treated fillers. The polymer matrix was made by dissolving 0.7%(w/w) of benzoyl peroxide(Janssen Chemical Co. Japan) in methacrylate monomer, whereupon 0.7%(v/v) N,N-dimethyl-p-toluidine(Tokyo Kasei Co. Japan) was added to the monomer. The weight percentage of each specific particle size distribution could be determined from a knowledge of the specific gravity, the weight(w/w), and corresponding volume %(v/v) of the filler sample in resin monomer. In crushed silica group and spherical silica group, the diametral tensile strengths and compressive strengths were measured with Instron Testing Machine(No.4467), and analyzed in 14 experimental composite resins made by filler fractions. The shear bond strength of 14 experimental composite resins to bovine enamel was measured with universal testing machine(Instron No.4467). The fracture surfaces were sputter-coated with a gold film and investigated by SEM. The results were as follows; 1. The diametral tensile strength was tendency to increase in crushed silica group, but not in spherical silica group. The highest diametral tensile strength was found in 20% filler fractions of two groups. 2. The compressive strength was higher in 15%(w/w) and 20%(w/w) in spherical silica group than in crushed silica group, but not in spherical silica group. 3. The significant correlation was noticed in increase in shear bond strength in crushed silica group, but not in spherical silica group. 4. The significantly highest shear bond strength was noticed in 50% filler concentration in crushed silica group, and in 15% filler concentration in spherical silica group, it was not significant in relation. 5. In crushed silica group, cut surface of resin matrix and the interface between resin and filler is obvious. In spherical silica group, fractures that occurred through the filler particles were round in shape.

• 한국임상수의학회지
• /
• 제25권4호
• /
• pp.268-273
• /
• 2008

For evaluation of immune stimulation effect of lacquer tree extracts, lymphocytes were counted by labeling of FITC-conjugated monoclonal antibody in the pheripheral blood of pigs that fed with a fodder supplemented by lacquer tree extracts. Populations of MHC-II+, CD4+, and CD8+T lymphocytes were increased more than 2% level after 1 week feed supply of the lacquer tree extracts. The increase of those T cells reached at maximum level after 2 weeks in the tested group. B lympyocytes with surface IgM were increased 5% after 1 week feed supply of the lacquer tree extracts, and their numbers reached maximum after 2 weeks in the tested group. For the assessment of cytotoxicity of the lacquer tree extracts, morphological changes were examined on the epithelial cells of small intestine from pigs fed with a fodder supplemented by 0.1 % lacquer tree extracts for 6 weeks (the tested group). Thin-sectioned tissue of small intestine was fixed with glutaraldehyde, then coated with gold particles, and the specimen was examined under scanning electron microscope. The villi on the mucus membrane of jejunum and ileum from the tested pigswere enlarged on the tip and were linked each other.

• 대한치과보철학회지
• /
• 제44권6호
• /
• pp.740-750
• /
• 2006

Statement of problems. In an attempt to reduce screw loosening, dry lubricant coatings such as pure gold or tefron have been applied to the abutment screw. However, under repeated tightening and loosening procedures, low wear resistance and adhesion strength of coating material produced free particles on the surface of abutment screw and increased frictional resistance resulting in screw tightening problems. Purpose. The aim of this study was to compare friction coefficient, adhesion strength, vickers hardness and evaluate coating surface of titanium alloy specimens coated with TiN(titanium nitride), ZrN(zirconium nitride) and WC(tungsten carbide). Material and method. Titanium alloy(Ti-6Al-4V) discs of 12mm in diameter and 1mm in thickness divided into 4 groups. TiN, ZrN and WC was coated for the specimens of 3 groups respectively, and those of 1 group were not coated. Each group was made up of 4 specimens. In this study, sputtering method was used among the PVD(Physical Vapor Deposition) techniques available for TiN, ZrN and WC coatings. Friction coefficient, adhesion strength, vickers hardness and coating surface of 4 groups were measured. Results. 1. For all three coating conditions, friction coefficient was significantly decreased. Especially, ZrN coated surface showed the lowest value. $TiN(0.39{\pm}0.02)$, $ZrN(0.24{\pm}0.01)$, $WC(0.31{\pm}0.03)$. 2. TiN coating showed the highest adhesion strength, however ZrN coating had the lowest value. $TiN(25.3N{\pm}1.6)$, $ZrN(14.8N{\pm}0.6)$, $ WC(18.4N{\pm}0.7)$. 3. Vickers hardness of all three coatings was remarkably increased as compared with that of none coated specimen. TiN coating had the highest Vickers hardness, however WC coating showed the lowest value. $TiN(1865.2{\pm}33.8)$, $ZrN(1814.4{\pm}18.6)$, $WC(1008.5{\pm}35.9)$. 4. The ZrN or WC coated specimen showed a homogeneous and smooth surface, however the rough surface with defects was observed for TiN coating. Conclusions. When TiN, ZrN and WC coating applied to the abutment screw, frictional resistance would be reduced, as a result, the greater preload and prevention of the screw loosening could be expected.