Browse > Article

A STUDY ON MECHANICAL PROPERTIES OF TiN, ZrN AND WC COATED FILM ON THE TITANIUM ALLOY SURFACE  

Oh, Dong-Joon (Department of Prosthodontics, College of Dentistry, Chosun University)
Kim, Hee-Jung (Department of Prosthodontics, College of Dentistry, Chosun University)
Chung, Chae-Heon (Department of Prosthodontics, College of Dentistry, Chosun University)
Publication Information
The Journal of Korean Academy of Prosthodontics / v.44, no.6, 2006 , pp. 740-750 More about this Journal
Abstract
Statement of problems. In an attempt to reduce screw loosening, dry lubricant coatings such as pure gold or tefron have been applied to the abutment screw. However, under repeated tightening and loosening procedures, low wear resistance and adhesion strength of coating material produced free particles on the surface of abutment screw and increased frictional resistance resulting in screw tightening problems. Purpose. The aim of this study was to compare friction coefficient, adhesion strength, vickers hardness and evaluate coating surface of titanium alloy specimens coated with TiN(titanium nitride), ZrN(zirconium nitride) and WC(tungsten carbide). Material and method. Titanium alloy(Ti-6Al-4V) discs of 12mm in diameter and 1mm in thickness divided into 4 groups. TiN, ZrN and WC was coated for the specimens of 3 groups respectively, and those of 1 group were not coated. Each group was made up of 4 specimens. In this study, sputtering method was used among the PVD(Physical Vapor Deposition) techniques available for TiN, ZrN and WC coatings. Friction coefficient, adhesion strength, vickers hardness and coating surface of 4 groups were measured. Results. 1. For all three coating conditions, friction coefficient was significantly decreased. Especially, ZrN coated surface showed the lowest value. $TiN(0.39{\pm}0.02)$, $ZrN(0.24{\pm}0.01)$, $WC(0.31{\pm}0.03)$. 2. TiN coating showed the highest adhesion strength, however ZrN coating had the lowest value. $TiN(25.3N{\pm}1.6)$, $ZrN(14.8N{\pm}0.6)$, $ WC(18.4N{\pm}0.7)$. 3. Vickers hardness of all three coatings was remarkably increased as compared with that of none coated specimen. TiN coating had the highest Vickers hardness, however WC coating showed the lowest value. $TiN(1865.2{\pm}33.8)$, $ZrN(1814.4{\pm}18.6)$, $WC(1008.5{\pm}35.9)$. 4. The ZrN or WC coated specimen showed a homogeneous and smooth surface, however the rough surface with defects was observed for TiN coating. Conclusions. When TiN, ZrN and WC coating applied to the abutment screw, frictional resistance would be reduced, as a result, the greater preload and prevention of the screw loosening could be expected.
Keywords
TiN(titanium nitride); ZrN(zirconium nitride); WC(tungsten carbide); Screw loosening;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Jemt T, Linden B, Lekholm U. Failures and complications in 127 consecutively placed fixed partial prostheses supported by Branemark Implants : From prosthetic treatment to first annual chekup. Int J Oral Maxillofac Implants 1992;7:40-44
2 Haack JE, Sakaguchi RL, Sun T, Coffey JP. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995;10:529-536
3 Motosh N. Development of design charts for bolts preloaded up to the plastic range. J Eng Ind 1976;98:849-851   DOI
4 Milic M, Milosavljevic M, Bibic N, Nenadovic T. Mechanical properties of sputtered TiN coatings. Thin Solid Films 1985;126:319-323   DOI   ScienceOn
5 Arias DF, Arango YC, Devia A. Characterization of bilayer coatings of TiN/ZrN grown using pulsed arc PAPVD. Appl. Sur. Sci 2005;252:1175- 1181
6 Takadoum J, Bennani HH. Influence of substrate roughness and coating thickness on adhesion, friction and wear of TiN films. Surf. & Coat. Tech. 1997;96:272-282   DOI   ScienceOn
7 Burguete RL, Johns RB, King T, Patterson EA. Tightening characteristics for screwed joints in osseointegrated dental implants. J Prosthet Dent 1994;71:592-599   DOI   ScienceOn
8 Hagiwara M, Chashi N. New tightening technique for threaded fasteners. Materials and Engineering Proceedings of the International Offshore mechanics and Artic Engineering Symposium vol 3. New York : ASME 1992;371-376
9 Valvoda V, Kuzel R, Cerny R. Structure of TiN coatings deposited at relatively high rates and low temperatures by magnetron sputtering. Thin Solid Films 1988;156:53-63   DOI   ScienceOn
10 McGlumphy EA, Mendel DA, Holloway JA. Implant screw mechanics. Dent Clin North Am 1998;42:71-89
11 Binon PP. Implants and components : Entering the new millenium. Int J Oral Maxillofac Implants 2000;15:76-94
12 Sakaguchi RL, Borgersen SE. Nonlinear contact analysis of preload in dental implant screws. Int J Oral Maxillofac Implants 1995;10:295-302
13 Martin WC, Woody RD, Miller BH, Miller AW. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 2001;86:24-32   DOI   ScienceOn
14 Winkler S, Ring K, Ring JD, Boberick KG. Implant screw mechanics and the settling effect : An overview. J Oral Implantol 2003;29:242-245   DOI   ScienceOn
15 Elias CN, Figueira DC, Rios PR. Influence of the coating material on the loosing of dental implant abutment screw joints. Materials Science and Engineering C 2005;1-6
16 Calister WD, Materials Science and Engineering An Introduction, 5th. Edition. Jhon Willey & Sons, Inc. New York, 2000, pp30-59
17 Worthington P, Bolender CL, Taylor TD. The Swedish system of osseointegrated implant : problems and complications encountered during a 4-year trial period. Int J Oral Maxillofac Implants 1987;2:77
18 Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Branemark Implants in edentulous Jaws: A study of treatment from the time of prosthesis placement to the first annual checkup. Int J Oral Maxillofac Implants 1991;6:270-276
19 Mezger PR, Creugers NHJ. Titanium nitride coatings in clinical dentistry. J Dent 1992;20:342-344   DOI   ScienceOn
20 Sundgren JE. Structure and properties of TiN coatings. Thin Solid Films 1985;128:21-44   DOI   ScienceOn
21 Squier RS, Psoter WJ, Taylor TD. Removal torques of conical, tapered implant abutments : The effects of anodization and reduction of surface area. Int J Oral Maxillofac Implants 2002;17:24-27
22 Polonsky IA, Chang TP, Keer LM, Sproul WD. A study of rolling-contact fatigue of bearing steel coated with physical vapor deposition TiN films: Coating response to cyclic contact stress and physical mechanisms underlying coating effect on the fatigue life. Wear 1998;215:191-204   DOI   ScienceOn
23 Jorneus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-359
24 Binon P, Sutter F, Brunski J, Gulbransen H, Weiner R. The role of screws in implant systems. Int J Oral Maxillofac Implants 1994;9:48-63