• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.188-189
• /
• 2002

One of the current goals in memory device developments is to realize a nonvolatile memory, i.e., the stored information maintains even when the power is turned off. The representative candidates for nonvolatile memories are magnetic random access memory (MRAM) and ferroelectric random access memory (FRAM). In order to achieve a high density memory in MRAM device, the external magnetic field should be localized in a tiny cell to control the direction of spontaneous magnetization. (omitted)

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.82-82
• /
• 1999

Ferroelectric materials are characterized by the existence of a spontaneous remnant polarization that can be switched between two stable states by an applied field. This phenomenon is known as ferroelectricity. The ferroelectricity can be utilized for nonvolatile memory application. Up to now 256K FRAM was successfully fabricated and sold in the memory market. This paper will briefly review the current statue of ferroelectric random access memory (FRAM) focusing on recent developments. In addition, the future prospects of FRAM will be addressed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.128-132
• /
• 2004

The perovskite ferroelectric materials of the PZT, SBT and BST series will attract much attention for application to ULSI devices. Among these materials, the BST ($Ba_0.6$$Sr_0.4$/$TiO_3$) is widely considered the most promising for use as an insulator in the capacitors of DRAMS beyond 1 Gbit and high density FRAMS. Especially, BST thin films have a good thermal-chemical stability, insulating effect and variety of Phases. However, BST thin films have problems of the aging effect and mismatch between the BST thin film and electrode. Also, due to the high defect density and surface roughness at grain boundarys and in the grains, which degrades the device performances. In order to overcome these weakness, we first applied the chemical mechanical polishing (CMP) process to the polishing of ferroelectric film in order to obtain a good planarity of electrode/ferroelectric film interface. BST ferroelectric film was fabricated by the sol-gel method. And then, we compared the surface characteristics before and after CMP process of BST films. We expect that our results will be useful promise of global planarization for FRAM application in the near future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.140-141
• /
• 2007

To fabricate the metal-ferroelectric-insulator-semiconductor (MFIS) structure for the ferroelectric random access memory (FRAM) application, we prepared the ferroelectric $Sr_{0.9}Bi_{2.1}Ta_2O_9$ (SBT) and the insulator LaZrOx (LZO) thin films on the silicon substrate using a sol-gel method. In this study, we will investigate the feasibility of the SBT/LZO/Si structure as one of the promising gate configuration for the 1-transistor (1-T) type FRAM, by measurements of the electrical properties and the physical properties.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.180-180
• /
• 2003

FRAM (Ferroelectric Random Access Memory)은 DRAM(Dynamic Random Access Memory)in 커패시터 재료을 상유전체 물질에서 강유전체 물질로 대체하여 전원 공급이 차단되어도 정보를 기억할 수 있고, 데이터의 고속처리가 가능하고 저소비전력과 집적화가 뛰어난 차세대 메모리 소자이다. 본 연구에서는 n-Well/P-Si(100) 기판위에 $Y_2$O$_3$ 박막을 중간층 (buffer layer)으로 사용하여 (Bi,La) Ti$_3$O$_{12}$ (BLT) 강유전체 박막을 졸-겔 방법으로 형성하여 MFM(I)S(Metal Ferroelectric Metal (Insulation) Silicon) 구조의 커패시터 및 전계효과형 트랜지스터(Field Effect Transistor) 소자를 제작하였다. 제작된 소자에 대해 형상학적, 전기적 특성을 조사, 분석하였다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.207.1-207
• /
• 2002

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.343-344
• /
• 2013

본 연구에서는 RF sputtering법을 이용하여 Si기판 위에 SBN 박막을 증착시켜서, 온도 범위 600~800[$^{\circ}C$]에서 열처리를 하였는데, 650[$^{\circ}C$]에서 열처리된 박막의 경우 표면거칠기는 약 0.42[nm]로 나타났으며, 누설전류밀도는 전압 범위 -5~+5[V]에서 10-5[$A/cm^2$] 이하로 안정된 값을 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.105-106
• /
• 2006

The ferroelectric materials of the PZT, SBT attracted much attention for application to ferroelectric random access memory (FRAM) devices. Through the last decade, the lead zirconate titanate (PZT) is one of the most attractive perovskite-type materials for the ferroelectric products due to its higher remanant polarization and the ability to withstand higher coercive fields. FRAM has been currently receiving increasing attention for one of future memory devices due to its ideal memory properties such as non-volatility, high charge storage, and faster switching operations. In this study, we first applied the damascene process using chemical mechanical polishing (CMP) to the fabricate the $Pb_{1.1}(Zr_{0.52}Ti_{0.48})O_3$ thin film capacitor in order to solve the problems of plasma etching such as low etching profile and ion charging. The structural characteristics were compared with specimens before and after CMP process of PZT films. The scanning electron microscopy (SEM) analysis was performed to compare the morphology surface characteristics of $Pb_{1.1}(Zr_{0.52}Ti_{0.48})O_3$ capacitors. The densification by the vertical sidewall patterning and charging-free ferroelectric capacitor could be obtained by the damascene process without remarkable difference of the characteristics.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.378-388
• /
• 2008

Flash memory has been attracting attention as the next mass storage media for mobile computing systems such as notebook computers and UMPC(Ultra Mobile PC)s due to its low power consumption, high shock and vibration resistance, and small size. A storage system with flash memory excels in random read, sequential read, and sequential write. However, it comes short in random write because of flash memory's physical inability to overwrite data, unless first erased. To overcome this shortcoming, we propose an SSD(Solid State Disk) architecture with two novel features. First, we utilize non-volatile FRAM(Ferroelectric RAM) in conjunction with NAND flash memory, and produce a synergy of FRAM's fast access speed and ability to overwrite, and NAND flash memory's low and affordable price. Second, the architecture categorizes host write requests into small random writes and large sequential writes, and processes them with two different buffer management, optimized for each type of write request. This scheme has been implemented into an SSD prototype and evaluated with a standard PC environment benchmark. The result reveals that our architecture outperforms conventional HDD and other commercial SSDs by more than three times in the throughput for random access workloads.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.101-102
• /
• 2006

PZT thin films, which are the representative ferroelectric materials in ferroelectric random access memory (FRAM), have some serious problem such as the imprint, retention and fatigue which ferroelectric properties are degraded by repetitive polarization. BL T thin film capacitors were fabricated by plasma etching, however, the plasma etching of BLT thin film was known to be very difficult. In our previous study, the ferroelectric materials such as PZT and BLT were patterned by chemical mechanical polishing (CMP) using damascene process to top electrode/ferroelectric material/bottom electrode. It is also possible to pattern the BLT thin film capacitors by CMP, however, the CMP damage was not considered in the experiments. The properties of BLT thin films were changed by the change of polishing pressure although the removal rate was directly proportional to the polishing pressure in CMP process.