• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.209-214
• /
• 2012

In this work, the reduced graphene nanosheets were synthesized from pre-exfoliated graphite flakes. The pristine graphite flakes were firstly pre-exfoliated to graphite nanoplatelets in the presence of acetic acid. The obtained graphite nanoplatelets were treated by Hummer's method to produce graphite oxide sheets and were finally exfoliated to graphene nanosheets by ultrasonication and reduction processes. The prepared graphene nanosheets were studied by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM), and transmission electron microscopy (TEM). From the results, it was found that the preexfoliation process showed significant influence on preparation of graphite oxide sheets and graphene nanosheets. The prepared graphene nanosheets were applied to the preparation of conductive materials, which yielded a greatly improved electrical resistance of $200{\Omega}/sq$.

• 융합정보논문지
• /
• 제8권5호
• /
• pp.95-100
• /
• 2018

금속 산화물/그래핀 형태의 복합 나노소재는 높은 전기용량을 갖는 2차 전지의 전극용 소재 또는 고감도 가스 센서의 감지물질 등으로 활용되는 매우 유용한 기능성 소재이다. 본 논문에서는 열 화학기상증착(CVD, Chemical Vapor Deposition)으로 Cu Foil 위에 대면적으로 합성된 CVD 그래핀 및 고정렬 열분해 흑연(HOPG, Highly Oriented Pyrolytic Graphite)으로부터 기계적으로 박리된 그래핀 기판 위에 이산화바나듐($VO_2$) 나노구조물을 기상수송방법으로 직접 성장시키는 연구를 수행하였다. 연구결과 CVD 그래핀 기판의 경우, 그래핀 결정 경계에서 상대적으로 많이 존재하는 기능기들이 $VO_2$ 나노구조물에서 핵형성의 씨앗으로 작용하는 것이 확인되었다. 반면에 HOPG에서 기계적으로 박리된 그래핀 나노시트 표면에는 기능기가 균일하게 분포하기 때문에, 2차원과 3차원 형태로 $VO_2$ 나노구조물이 성장되었다. 이러한 연구결과는 고기능성 $VO_2$/그래핀 나노복합소재를 이용하여 높은 전기용량을 갖는 2차 전지 전극소재 및 고감도 가스 센서의 감지물질 합성에 유용하게 활용될 것으로 전망된다.

• Applied Microscopy
• /
• 제49권
• /
• pp.3.1-3.7
• /
• 2019

Graphene, which is one of the most promising materials for its state-of-the-art applications, has received extensive attention because of its superior mechanical properties. However, there is little experimental evidence related to the mechanical properties of graphene at the atomic level because of the challenges associated with transferring atomically-thin two-dimensional (2D) materials onto microelectromechanical systems (MEMS) devices. In this study, we show successful dry transfer with a gel material of a stable, clean, and free-standing exfoliated graphene film onto a push-to-pull (PTP) device, which is a MEMS device used for uniaxial tensile testing in in situ transmission electron microscopy (TEM). Through the results of optical microscopy, Raman spectroscopy, and TEM, we demonstrate high quality exfoliated graphene on the PTP device. Finally, the stress-strain results corresponding to propagating cracks in folded graphene were simultaneously obtained during the tensile tests in TEM. The zigzag and armchair edges of graphene confirmed that the fracture occurred in association with the hexagonal lattice structure of graphene while the tensile testing. In the wake of the results, we envision the dedicated preparation and in situ TEM tensile experiments advance the understanding of the relationship between the mechanical properties and structural characteristics of 2D materials.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.84-91
• /
• 2012

Single and few-layer graphene nanosheets (GNs) have successfully synthesized by a modified Hummer's method followed by chemical reduction of exfoliated graphene oxide (GO) in the presence of hydrazine monohydrate. GO and GNs were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), X-ray diffractions (XRD), Raman spectroscopy, Transmission electron microscopy (TEM), Atomic force microscopy (AFM), Optical microscopy (OM) and by electrical conductivity measurements. The result showed that electrical conductivity of GNs was significantly improved, from $4.2{\times}10^{-4}$ S/m for GO to 12 S/m for GNs, possibly due to the removal of oxygen-containing functional group during chemical reduction. In addition, the $NO_2$ gas sensing characteristics of GNs are also discussed.

• 한국표면공학회지
• /
• 제55권2호
• /
• pp.84-90
• /
• 2022

With the growing interest in energy storage and conversion systems including secondary batteries, capacitors, and water electrolysis, various electrode materials are being developed to improve the energy efficiency. Among them, graphene is regarded as one of the promising candidates owing to its exceptional properties - large surface area, and excellent electrical conductivity. Herein, we report a facile one-step electrochemical approach to synthesize exfoliated graphene/Fe oxide compound. The effect of experimental conditions - the types of applied voltage, kinds of counter electrodes, acidity of electrolyte on the synthesis of graphene/Fe oxide compound is investigated.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.226-231
• /
• 2011

Graphene was coated on STS 316L by electro spray coating method to improve its properties of corrosion resistance and contact resistance. Exfoliated graphite (graphene) was made of the graphite by chemical treatment. Graphene is distributed using dispersing agent, and STS 316L was coated with diffuse graphene solution by electro spray coating method. The structure of the exfoliated graphite was analyzed using XRD and the coating layer of surface was analyzed by using SEM. Analysis showed that multi-layered graphite structure was destroyed and it was transformed into fine layers graphene structure. And the result of SEM analysis on the surface and the cross section, graphene layer was uniformly formed with 3~5 ${\mu}m$ thickness on the surface of substrate. Corrosion resistance test was applied in the corrosive solution which is similar to the PEM fuel cell stack inside. And interfacial contact resistance test was measured to simulate the internal operating conditions of PEM fuel cell stack. The results of measurements show that stainless steel coated with graphene was improved in corrosion resistance and surface contact resistance than stainless steel without graphene coating layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.458-458
• /
• 2011

Graphene, a single atomic layer of sp2-bonded carbon, shows substantial potential for various applications. Chemical manipulation of its electronic properties will be of great importance. In this study, we have investigated interaction between graphene and organic molecular layer of tetrafluorotetracyanoquinodimethane (F4-TCNQ), a strong electron acceptor. F4-TCNQ films of varying thickness were evaporated onto graphene mechanically exfoliated on SiO2/Si substrates. F4-TCNQ molecules increase the frequencies of Raman G and 2D bands of graphene while decreasing the linewidth of G band and 2D/G intensity ratio, which is consistent with increase of hole density in graphene. These results exemplify the possibility of chemical tuning of electronic properties of graphene.

• 한국표면공학회지
• /
• 제48권4호
• /
• pp.163-168
• /
• 2015

Graphene has attracted much attention due to its remarkable physical properties and potential applications in many fields. In special, the electronic properties of graphene are influenced by the number of layer, stacking sequence, edge state, and doping of foreign elements. Recently, many efforts have been dedicated to alter the electronic properties by doping of various species, such as hydrogen, oxygen, nitrogen, ammonia and etc. Here, we report our recent results of plasma doping on graphene. We prepared mechanically exfoliated graphene, and performed the plasma treatment using ammonia gas for nitrogen doping. The direct-current plasma system was used for plasma ignition. The doping level was estimated from the number of peak shift of G-band in Raman spectra. The upshift of G-band was observed after ammonia plasma treatment, which implies electron doping to graphene.

• 접착 및 계면
• /
• 제12권4호
• /
• pp.133-137
• /
• 2011

그래파이트 옥사이드(GO)를 tetramethylammonium hydroxide (TMAOH)수용액을 이용하여 나노 크기로 분산되어 박리된 그래파이트 옥사이드(Exfoliated Graphite Oxide: EGO)를 제조하였다. 얻어진 EGO를 $Zn(NO_3)_2{\cdot}6H_2O$, $Al(NO_3)_3{\cdot}9H_2O$, urea, trisodium citrate의 혼합용액에 넣어 격렬히 교반 후 고압멸균기에서 열수 처리하여 동시에 환원된 그래핀(RGO)과 Zn-Al 이중층상 수산화물(LDH)의 나노 복합재료를 제조하였다. 즉, EGO의 표면에 두 개의 금속이온이 흡착된 후 열수처리 환원을 통하여 Zn-Al 이중층상 수산화물이 RGO의 표면에 자유롭게 성장하여 복합화 되었다. 얻어진 그래핀/Zn-Al LDH의 구조 및 형태와 열적 특성은 FE-SEM, EDX, TEM, FT-IR, XRD, TGA와 DSC를 통하여 분석하였다.

• 공업화학
• /
• 제32권2호
• /
• pp.157-162
• /
• 2021

본 연구에서는 1축 extruder를 원사 압출 장비로 사용하여 재활용 폴리프로필렌(rPP)으로 3D 프린터용 원사를 제조하였고, 전기화학적 박리 그래핀을 rPP 대비 10, 20 wt%로 첨가하여 그래핀 복합체 원사를 제조하였다. 전기화학적 박리그래핀은 그 분산도가 우수하여 균일한 rPP/그래핀 복합체 원사 제조를 가능하게 하였다. 그래핀의 함량이 증가할수록 열분해 속도 등 열적 성능이 향상되었다. 기계적 물성 또한 rPP 대비 그래핀 함량이 10 wt%일 때 증가하였는데, 20 wt%에서는 오히려 기계적 물성이 감소하는 것을 볼 수 있었다. 제조한 원사들을 사용하여 상용 3D 프린터를 통해 3D 성형체를 성공적으로 제조할 수 있었으며, 폐플라스틱을 재활용하여 제조하였기 때문에 환경적, 경제적으로 이점을 가질 것으로 기대된다.