• 한국진공학회지
• /
• 제16권5호
• /
• pp.366-370
• /
• 2007

밀도가 높고 주기적으로 배열된 나노 크기의 기공이 25nm 두께의 실리콘 산화막 기판위에 형성 되었다. 나노미터 크기의 패턴을 형성시키기 위해서 자기조립물질을 사용했으며 폴리스티렌(PS) 바탕에 벌집형태로 평행하게 배열된 실린더 모양의 폴리메틸메타아크릴레이트(PMMA)의 구조를 형성하였다. 폴리메틸메타아크릴레이트를 아세트산으로 제거하여 폴리스티렌만 남아있는 나노크기의 마스크를 만들었다. 폴리스티렌으로 이루어진 나노패턴의 지름은 $8{\sim}30nm$ 였고 높이는 40nm였으며, 패턴과 패턴사이의 간격은 60nm였다. 형성된 패턴을 실리콘 산화막 위에 전사시키기 위해 불소 기반의 화학 반응성 식각을 사용하였다. 실리콘 산화막에 형성된 기공의 지름은 $9{\sim}33nm$였다. 실리콘 산화막을 불산으로 제거하여 실리콘에 형성된 기공을 관찰하였고, 실리콘기판에 형성된 기공의 지름은 $6{\sim}22nm$였다. 형성된 기공의 크기는 폴리메틸메타아크릴레이트의 분자량과 관계가 있음을 알 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.244-250
• /
• 2008

An inductively coupled plasma etching process to replace an existing slower rate reactive ion etching process for $60{\mu}m$ diameter via-holes using Cl2/BCl3 gases has been investigated. Process pressure and platen power were varied at a constant ICP coil power to reproduce the RIE etched $200{\mu}m$ deep via profile, at high etch rate. Desired etch profile was obtained at 40 m Torr pressure, 950 W coil power, 90W platen power with an etch rate ${\sim}4{\mu}m$/min and via etch yield >90% over a 3-inch wafer, using $24{\mu}m$ thick photoresist mask. The etch uniformity and reproducibility obtained for the process were better than 4%. The metallized via-hole dc resistance measured was ${\sim}0.5{\Omega}$ and via inductance value measured was $\sim$83 pH.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권4호
• /
• pp.149-154
• /
• 2004

This paper presents a silicon probe tip for vertical probe card application. The silicon probe tip was fabricated using MEMS technology such as porous silicon micromachining and deep- RIE (reactive ion etching). The thickness of the silicon epitaxial layers was 5 ${\mu}{\textrm}{m}$ and 7 ${\mu}{\textrm}{m}$, respectively. The width and length were 40 ${\mu}{\textrm}{m}$ and 600 ${\mu}{\textrm}{m}$, respectively. The probe structure was a multilayered structure and was composed of Au/Ni-Cr/Si$_3$N$_4$/n-epi layers. The height of the curled probe tip was measured as a function of the annealing temperature and time. Resistance characteristics of the probe tip were measured using a touchdown test.

• 소성∙가공
• /
• 제13권3호
• /
• pp.285-289
• /
• 2004

Micro tensile test specimens of thin film single crystal silicon for the most useful structural materials in MEMS (Micro Electro Mechanical System) devices were fabricated using SOI (Silicon-on-Insulator) wafers and MEMS processes. Dimensions of micro tensile test specimens were thickness of $7\mu\textrm{m}$, width of 50~$350\mu\textrm{m}$, and length of 2mm. Top and bottom silicon were etched using by deep RIE (Reactive Ion Etching). Thin film aluminum markers on testing region of specimens with width of $5\mu\textrm{m}$, lengths of 30~$180\mu\textrm{m}$ and thickness of 200 nm for measuring tensile strain were fabricated by aluminum wet etching method. Fabricated side wall angles of aluminum marker were about $45^{\circ}~50^{\circ}$. He-Ne laser with wavelength of 633nm was used for checking fringed patterns.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.49-53
• /
• 2005

The objective of this research was to establish the size limitation of micro metal forming and analyze the formability of foil. Flat-rolled ultra thin metallic copper foil($3{\mu}m$ in thickness) was used as a forming material and foil was annealed to improve the formability at the temperature of $385^{\circ}C$. Forming die was fabricated by using etching technique of DRIE(deep reactive ion etching) and HNA isotropic etching. For the forming die and coupe. foil were vacuum packed and the forming was conducted as applying hydrostatic pressure of 250MPa to the vacuum packed unit. We successfully obtained the micro channels of $12\~14{\mu}m$ width and $9{\mu}m$ depth from micro forming process we designed. We also investigated the thickness strain distribution of foil from experiment and FE simulation result. Micro channels had a good formability of smooth surface and size accuracy. We expect that micro metal forming technology will be applied to production of micro parts.

• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.13-17
• /
• 2006

밀도가 높고 주기적인 배열의 기공과 나노패턴이 된 텅스텐 나노점이 실리콘 산화물/실리콘 기판위에 형성이 되었다. 기공의 지름은 25 nm이고 깊이는 40 nm 이었으며 기공과 기공 사이의 거리는 60 nm이었다. nm 크기의 패턴을 형성시키기 위해서 자기조립물질을 사용했으며 폴리스티렌(PS) 바탕에 벌집형태로 평행하게 배열된 실린더 모양의 폴리메틸메타아크릴레이트(PMMA)의 구조를 형성했다. 폴리메틸메타아크릴레이트를 아세트산으로 제거하여 폴리스티렌만 남아있는 건식 식각용 마스크를 만들었다. 실리콘 산화막은 불소 기반의 화학반응성 식각법을 이용하여 식각했다. nm크기의 트렌치 안에 선택적으로 증착된 텅스텐 나노점을 만들기 위해서 저압화학기상증착(LPCVD)방법을 이용하였다. 텅스텐 나노점과 실리콘 트렌치의 지름은 26 nm 와 30 nm였다.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.79-84
• /
• 2010

3차원 Si 칩 패키징 공정을 위한 비아 홀(TSV: Through-Si-Via) 및 Au 시드층 형성, 전기 도금을 이용한 Cu 충전기술과 범핑 공정 단순화에 관하여 연구하였다. 비아 홀 형성을 위하여 $SF_6$ 와 $C_4F_8$ 플라즈마를 교대로 사용하는 DRIE(Deep Reactive Ion Etching) 법을 사용하여 Si 웨이퍼를 에칭하였다. 1.92 ks동안 에칭하여 직경 40 ${\mu}m$, 깊이 80 ${\mu}m$의 비아 홀을 형성하였다. 비아 홀의 옆면에는 열습식 산화법으로 $SiO_2$ 절연층을, 스퍼터링 방법으로 Ti 접합층과 Au 시드층을 형성하였다. 펄스 DC 전기도금법에 의해 비아 홀에 Cu를 충전하였으며, 1000 mA/$dm^2$ 의 정펄스 전류에서 5 s 동안, 190 mA/$dm^2$의 역펄스 조건에서 25 s 동안 인가하는 조건으로 총 57.6 ks 동안 전기도금하였다. Si 다이 상의 Cu plugs 위에 리소그라피 공정 없이 전기도금을 실시하여 Sn 범프를 형성할 수 있었으며, 심각한 결함이 없는 범프를 성공적으로 제조할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.1-5
• /
• 2001

STI(shallow trench isolation)-CMP(chemical mechanical polishing) process have been substituted for LOCOS(local oxidation of silicon) process to obtain global planarization in the below sub-0.5㎛ technology. However TI-CMP process, especially TI-CMP with RIE(reactive ion etching) etch back process, has some kinds of defect like nitride residue, torn oxide defect, etc. In this paper, we studied how to reduced torn oxide defects after STI-CMP with RIE etch back processed. Although torn oxide defects which can occur on trench area is not deep and not severe, torn oxide defects on moat area is not deep and not severe, torn oxide defects on moat area is sometimes very deep and makes the yield loss. Thus, we did test on pattern wafers which go through trench process, APECVD process, and RIE etch back process by using an IPEC 472 polisher, IC1000/SUVA4 PAD and KOH base slurry to reduce the number of torn defects and to study what is the origin of torn oxide defects.

• 반도체디스플레이기술학회지
• /
• 제7권1호
• /
• pp.1-5
• /
• 2008

In this paper, we fabricated pressure difference type gas flow sensor using only dry etching technology by ICP-RIE(inductive coupled plasma reactive ion etching). The sensor's structure consists of a common shear stress type piezoresistive pressure sensor with an orifice fabricated in the middle of the sensor diaphragm. Generally, structure like diaphragm is fabricated by wet etching technology using TMAH, but we fabricated diaphragm by only dry etching using ICP-RIE. To equalize the thickness of diaphragm we applied insulator($SiO_2$) layer of SOI(Si/$SiO_2$/Si-sub) wafer as delay layer of dry etching. Size of fabricated diaphragm is $1000{\times}1000{\times}7\;{\mu}m^3$ and overall chip $3000{\times}3000{\times}7\;{\mu}m^3$. We measured the variation of output voltage toward the change of gas pressure to analyze characteristics of the fabricated sensor. Sensitivity of fabricated sensor was relatively high as about 1.5mV/V kPa at 1kPa full-scale. Nonlinearity was below 0.5%F.S. Over-pressure range of the fabricated sensor is 100kPa or more.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.1020-1025
• /
• 2012

In this study, we fabricated the superhydrophobic and super-water-repellent surface with the micro/nano scale structures using simple conventional silicon wet-etching technique and the black silicon method by deep reactive ion etching. These fabrication methods are simple but very effective. Also we reported the droplet impact experimental results on the micro/nano-scaled surface. There are two representative impact behaviors as "rebound" and "fragmentation". We found the transition Weber number between "rebound" and "fragmentation" statements, experimentally. Additionally, we concerned about the dimensionless spreading diameters for our super-water-repellent surface. The novel characterization method was introduced for analysis including the "fragmentation" region. As a result, our super-water-repellent surface with the micro/nano-scaled structures shows the different impact behaviors compared with a reference smooth surface, by some meaningful experiments.