• Macromolecular Research
• /
• 제16권6호
• /
• pp.532-538
• /
• 2008

Epoxy-based azopolymers were synthesized by the reaction of the diglycidyl ether of bisphenol A (DGEBA) or N,N-diglycidyl aniline (DGA) with disperse orange 3 (DO3) to give poly(DGEBA-co-DO3) or poly(DGA-co-DO3), respectively. Aniline-based azopolymers prepared from poly(DGA-co-An) precursors, synthesized by the reaction of DGA with aniline, were produced by the post-azo coupling reaction with diazonium salts containing various substituents. Holographic gratings were carried out to measure the diffractive efficiencies (DE) for the interference patterns of the $Ar^+$ laser from 50 to $300\;mW/cm^2$ intensity. The shorter repeating unit with higher chromophore density induced deeper surface relief gratings (SRG). Large surface gratings were observed for the aniline-based azopolymers with -COOH substituents, as compared with those for epoxy-based azopolymers. The aniline-based azopolymers with dimerized chromophores and various substituents were also synthesized to observe the effect of chromophore substituents and dimerization on the holography. The dimerized chromophores were more sensitively photoisomerized by the $Ar^+$ laser beam, and demonstrated a larger grating than that with one azo bond.

• Journal of Dairy Science and Biotechnology
• /
• 제37권1호
• /
• pp.49-56
• /
• 2019

Vulvovaginal candidiasis is a major urogenital infection in women. Lactobacilli are important in maintaining vaginal health. In the present study, the effect of heat adaptation at $47{\sim}52^{\circ}C$ prior to heat stress at $60^{\circ}C$ in improving the viability of Lactobacillus salivarius MG242 was examined. L. salivarius MG242 has antifungal effects against Candida albicans. Heat-adapted cells had a higher survival rate than non-adapted cells during the subsequent heat stress. When chloramphenicol was added during the adaptation process, heat tolerance was abolished, suggesting the involvement of de novo protein synthesis with the heat adaptation of L. salivarius MG242 strain. Exopolysaccharide quantification and scanning election microscopy did not reveal any appreciable changes during heat adaptation. The antifungal activity of L. salivarius MG242 against C. albicans was maintained during the heat adaptation. These results suggest that heat adaptation can be applied for the development of probiotic products using L. salivarius MG242 to improve its stress tolerance during processing.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1330-1338
• /
• 2018

High-density UMo/Zr monolithic nuclear fuel plates have a promising application prospect in high flux research and test reactors. The solid state welding method called co-rolling is used for their fabrication. Hot co-rolling simulations for the composite blanks of UMo/Zr monolithic nuclear fuel plates are performed. The effects of coupon sizes and mechanical property parameters on the contact pressures between the to-be-bonded surfaces are investigated and analyzed. The numerical simulation results indicate that 1) the maximum contact pressures between the fuel coupon and the Zircaloy cover exist near the central line along the plate length direction; as a whole the contact pressures decrease toward the edges in the plate width direction; and lower contact pressures appear at a large zone near the coupon corner, where de-bonding is easy to take place in the in-pile irradiation environments; 2) the maximum contact pressures between the fuel coupon and the Zircaloy parts increase with the initial coupon thickness; after reaching a certain thickness value, the contact pressures hardly change, which was mainly induced by the complex deformation mechanism and special mechanical constitutive relation of fuel coupon; 3) softer fuel coupon will result in lower contact pressures and form interfaces being more out-of-flatness.

• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.719-725
• /
• 1986

Reed-solomon(R-S) code is very effective to coerrect both random and burst errors over a noise communication channel. However, the required hardware is very complex if the B/M algorithm was employed. Moreover, when the error correction system consists of two R-S decoder and de-interleave, the I/O data bns lines becomes 9bits because of an erasure flag bit. Thus, it increases the complexity of hardware. This paper describes the R-S decoder which consisits of a error correction section that uses a direct decoding algorithm and erasure generation section and a erasure generation section which does not use the erasure flag bit. It can be shown that the proposed R-S dicoder is very effective in reducing the size of required hardware for error correction.

• 한국미생물·생명공학회지
• /
• 제42권2호
• /
• pp.190-193
• /
• 2014

CMP-Neu5Ac synthetase는 sialyated 된 glycoconjugates의 전구체로 사용되는 CMP-Neu5Ac를 합성하는데 관여하는 주요 효소이다. Escherichia coli K1에서 유래한 CMP-Neu5Ac synthetase 유전자 (neuA)는 평소 E. coli BL21(DE3)에서 비수용성으로 생성되는데, 이를 수용성 단백질로 생산하고자 여러 가지 샤페론 단백질 동시 발현기술을 이용하였다. 이를 위해, GroEL-ES와 DnaK-DnaJ-GrpE를 암호화하는 pG-KJE8 plasmid와 neuA를 동시 형질전환 시켰고 0.01 mM IPTG와 0.005 mg/ml의 L-arabinose로 유도하여 $20^{\circ}C$에서 발현시켰다. 그 결과, E. coli에서의 수용성 CMP-Neu5Ac Synthetase 생산이 현저하게 증가하였다.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.76-79
• /
• 2005

Magnetic random access memory(MRAM) 소자재료로 사용되고 있는 NiFe, NiFeCo, Ta 등의 박막을 $Cl_2/Ar$ 유도 결합 플라즈마를 이용하여 식각하였다. NiFe와 NiFeCo의 식각 속도는 특정 ICP 공급 전력에서 최대값을 나타냈지만, Ta의 식각 속도는 ICP 공급 전력이 증가함에 따라 증가하였다. RF 하부전극 전력이 증가하면서 자성박막의 식각 속도는 증가하였지만, 공정압력과 $Cl_2$의 농도가 증가함에 따라 점진적으로 감소하였다. 식각 후에 염소에 의한 표면 부식을 방지하기 위해 이온수로 5분간 세척하였다. 식각 프로파일은 $Cl_2$ 농도가 50%일 경우에 식각 단면에 식각 잔유물들이 존재하지 않는 부드러운 단면을 얻을 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제11권1호
• /
• pp.1-8
• /
• 2023

본 연구에서는 시멘트 제조 공정 CO₂ 배출을 저감하기 위해 철강 슬래그로 시멘트 원료로 사용되는 석회석 사용량을 대체할수 있는 수준을 시뮬레이션 방법을 이용하여 평가하였다. 이를 위해 석회석을 비롯한 시멘트 각 원료와 석회석 대체원료로서 고로 서냉 슬래그, 전로 슬래그, KR 슬래그의 화학성분을 바탕으로 최적 시멘트 원료 배합을 도출하는 시뮬레이션 분석을 수행하였다. 분석 결과, 슬래그 대체원료는 일정 수준의 CaO를 함유해 석회석 사용량을 일부 저감하는 비탄산염 대체원료로 사용할 수 있음을 확인하였다. 동시에 각 원료의 최대 사용 가능 수준을 도출하였는데. 특히 이들 원료를 각기 사용하는 경우보다 혼합해서 사용하면 석회석 저감 효과를 증대해 탈탄산 반응에 의한 CO₂ 배출을 저감하는데 기여할 수 있는 것으로 평가되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1768-1773
• /
• 2016

This experiment was conducted to determine the effect of variety and planting year on the nutritive values of corn fed to growing pigs. Four corn varieties examined in this experiment were planted in the same village located in Longhua County, Heibei Province, China, in 2012, 2013, and 2014, respectively. During each year, corn was hand-harvested in early October and sun dried to about 14% moisture content. Three batches of twenty-four barrows ($33.27{\pm}4.30$, $31.88{\pm}2.93$, $34.21{\pm}3.81kg$ body wight [BW] in 2012, 2013, and 2014, respectively) were used and allotted to a complete block design with 4 diets and 6 replicate pigs per diet. Pigs were individually placed in metabolic crates. The four experimental diets were formulated by mixing each variety of corn and vitamins and minerals, respectively. A five-day collection period followed a seven-day diet acclimation period. The results indicated that variety of corn significantly influenced the available energy content (digestible energy [DE] on dry matter basis, p<0.05; metabolizable energy (ME) on dry matter basis, p<0.05, respectively), and the apparent total tract digestibility (ATTD) of organic matter (p<0.01), dry matter (p<0.05), gross energy (p<0.05), neutral detergent fiber (p<0.01), acid detergent fiber and ether extract (p<0.05). The planting year also significantly influenced the available energy contents (DE on dry matter basis, p<0.05; ME on dry matter basis, p<0.01, respectively) and the ATTD of neutral detergent fiber (p<0.01), acid detergent fiber (p<0.01), crude protein (p<0.01), and ether extract (p<0.01). No interaction was observed between the variety and planting year in DE and ME contents in corn. In conclusion, the variety and planting year significantly influenced the available energy and nutrient digestibility of corn fed to growing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권9호
• /
• pp.1458-1468
• /
• 2019

Objective: As one of the most important metabolic organs, the liver plays vital roles in modulating the lipid metabolism. This study was to compare miRNA expression profiles of the Large White liver between two different developmental periods and to identify candidate miRNAs for lipid metabolism. Methods: Eight liver samples were collected from White Large of 70-day fetus (P70) and of 70-day piglets (D70) (with 4 biological repeats at each development period) to construct sRNA libraries. Then the eight prepared sRNA libraries were sequenced using Illumina next-generation sequencing technology on HiSeq 2500 platform. Results: As a result, we obtained 346 known and 187 novel miRNAs. Compared with the D70, 55 down- and 61 up-regulated miRNAs were shown to be significantly differentially expressed (DE). Gene ontology and Kyoto encyclopedia of genes and genomes enrichment analysis indicated that these DE miRNAs were mainly involved in growth, development and diverse metabolic processes. They were predicted to regulate lipid metabolism through adipocytokine signaling pathway, mitogen-activated protein kinase, AMP-activated protein kinase, cyclic adenosine monophosphate, phosphatidylinositol 3 kinase/protein kinase B, and Notch signaling pathway. The four most abundantly expressed miRNAs were miR-122, miR-26a and miR-30a-5p (miR-122 only in P70), which play important roles in lipid metabolism. Integration analysis (details of mRNAs sequencing data were shown in another unpublished paper) revealed that many target genes of the DE miRNAs (miR-181b, miR-145-5p, miR-199a-5p, and miR-98) might be critical regulators in lipid metabolic process, including acyl-CoA synthetase long chain family member 4, ATP-binding casette A4, and stearyl-CoA desaturase. Thus, these miRNAs were the promising candidates for lipid metabolism. Conclusion: Our study provides the main differences in the Large White at miRNA level between two different developmental stages. It supplies a valuable database for the further function and mechanism elucidation of miRNAs in porcine liver development and lipid metabolism.

• Journal of Radiation Protection and Research
• /
• 제42권3호
• /
• pp.141-145
• /
• 2017

Background: The concrete walls inside the vaults of cyclotron facilities are activated by neutrons emitted by the targets during radioisotope production. Reducing the amount of radioactive waste created in such facilities is very important in case they are decommissioned. Thus, we proposed a strategy of reducing the neutron activation of the concrete walls in cyclotrons during operation. Materials and Methods: A polyethylene plate and B-doped Al sheet (30 wt% of B and 2.5 mm in thickness) were placed in front of the wall in the cyclotron room of a radioisotope production facility for pharmaceutical use. The target was Xe gas, and a Cu block was utilized for proton dumping. The irradiation time, proton energy, and beam current were 8 hours, 30 MeV, and $125{\mu}A$, respectively. To determine a suitable thickness for the polyethylene plate set in front of the B-doped Al sheet, the neutron-reducing effects achieved by inserting such sheets at several depths within polyethylene plate stacks were evaluated. The neutron fluence was monitored using an activation detector and 20-g on de Au foil samples with and without 0.5-mm-thick Cd foil. Each Au foil sample was pasted onto the center of a polyethylene plate and B-doped Al sheet, and the absolute activity of one Au foil sample was measured as a standard using a Ge detector. The resulting relative activities were obtained by calculating the ratio of the photostimulated luminescence of each foil sample to that of the standard Au foil. Results and Discussion: When the combination of a 4-cm-thick polyethylene plate and B-doped Al sheet was employed, the thermal neutron rate was reduced by 78%. Conclusion: The combination of a 4-cm-thick polyethylene plate and B-doped Al sheet effectively reduced the neutron activation of the investigated concrete wall.