References
- H. Ozaltun, M.H. Shen, P. Medvedev, Assessment of residual stresses on U10Mo alloy based monolithic minidplates during hot isostatic pressing, J. Nucl. Mater. 419 (1-3) (2011) 76-84. https://doi.org/10.1016/j.jnucmat.2011.08.029
- Y. Zhao, X. Gong, S. Ding, Simulation of the irradiation-induced thermo-mechanical behaviors evolution in monolithic UeMo/Zr fuel plates under a heterogeneous irradiation condition, Nucl. Eng. Des. 285 (2015) 84-97. https://doi.org/10.1016/j.nucengdes.2014.12.030
- J.F. Jue, D.D. Keiser Jr., C.R. Breckenridge, et al., Microstructural characteristics of HIP-bonded monolithic nuclear fuels with a diffusion barrier, J. Nucl. Mater. 448 (1-3) (2014) 250-258. https://doi.org/10.1016/j.jnucmat.2014.02.004
- M.K. Meyer, J. Gan, J.F. Jue, et al., Irradiation performance of U-Mo monolithic fuel, Nucl. Eng. Technol. 46 (2) (2014) 169-182. https://doi.org/10.5516/NET.07.2014.706
- Y. Park, J. Yoo, K. Huang, et al., Growth kinetics and microstructural evolution during hot isostatic pressing of U-10 wt.% Mo monolithic fuel plate in AA6061 cladding with Zr diffusion barrier, J. Nucl. Mater. 447 (1-3) (2014) 215-224. https://doi.org/10.1016/j.jnucmat.2014.01.018
- D.A. Lopes, A.J.O. Zimmermann, S.L. Silva, J.R.C. Piqueira, Thermal cycling effect in U-10Mo/Zry-4 monolithic nuclear fuel, J. Nucl. Mater. 473 (2016) 136-142. https://doi.org/10.1016/j.jnucmat.2016.02.029
- D. Keiser, F. Rice, CNEA Fresh Fuel Plate Characterization Summary Report, Idaho National Laboratory (INL), 2012.
- H.D. Manesh, H.S. Shahabi, Effective parameters on bonding strength of roll bonded Al/St/Al multilayer strips, J. Alloy. Comp. 476 (1-2) (2009) 292-299. https://doi.org/10.1016/j.jallcom.2008.08.081
- H.Z. Yan, J.G. Lenard, A study of warm and cold roll-bonding of an aluminium alloy, Mater. Sci. Eng., A 385 (1-2) (2004) 419-428. https://doi.org/10.1016/S0921-5093(04)00906-2
- N. Bay, Cold pressure weldingdthe mechanisms governing bonding, J. Eng. Ind. 101 (2) (1979).
- N. Bay, C. Clemensen, O. Juelstorp, T. Wanheim, Bond strength in cold roll bonding, CIRP Ann. - Manuf. Technol. 34 (1) (1985) 221-224. https://doi.org/10.1016/S0007-8506(07)61760-0
- M. Abbasi, M.R. Toroghinejad, Effects of processing parameters on the bond strength of Cu/Cu roll-bonded strips, J. Mater. Process. Technol. 210 (3) (2010) 560-563. https://doi.org/10.1016/j.jmatprotec.2009.11.003
- R. Jammaati, M.R. Toroghinejad, Investigation of the parameters of the cold roll bonding (CRB) process, Mater. Sci. Eng. 527 (9) (2010) 2320-2326. https://doi.org/10.1016/j.msea.2009.11.069
- G. Zhou, L. Hua, D. Qian, et al., Effects of axial rolls motions on radialeaxial rolling process for large-scale alloy steel ring with 3D coupled thermomechanical FEA, Int. J. Mech. Sci. 59 (1) (2012) 1-7. https://doi.org/10.1016/j.ijmecsci.2012.01.002
- J.P. Hambleton, A. Drescher, On modeling a rolling wheel in the presence of plastic deformation as a three- or two-dimensional process, Int. J. Mech. Sci. 51 (11-12) (2009) 846-855. https://doi.org/10.1016/j.ijmecsci.2009.09.024
- K. Arola, R. von Hertzen, Development of sheet tension under a rolling nip on a paper stack, Int. J. Mech. Sci. 47 (1) (2005) 110-133. https://doi.org/10.1016/j.ijmecsci.2004.11.006
- Z. Zhuang, X.C. You, J.H. Liao, et al., Finite Element Analysis and Application Based on ABAQUS, Tsinghua University Press, Beijing, 2009.
- D.L. Hagrman, G.A. Reyman, MATPRO-Version11, A Handbook of Materials, Properties for use in the analysis of light water reactor fuel rod behavior, NUREG/CR-0497, TREE-1280, 1979, Rev.3.
- J. Wan, X. Kong, S. Ding, et al., Numerical simulation research on rolling process of monolithic nuclear fuel plate, Atomic Energy Sci. Technol. 49 (3) (2015) 511-517.
- X. Kong, H. Yang, S. Ding, Zircaloy plate rolling simulation with an effective strain-rate-dependent stress-updating algorithm, Int. J. Nonlinear Sci. Numer. Stimul. 17 (2) (2016) 113-125.