Effects of sizes and mechanical properties of fuel coupon on the rolling simulation results of monolithic fuel plate blanks |
Kong, Xiangzhe
(Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University)
Ding, Shurong (Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University) Yang, Hongyan (Science and Technology on Reactor Fuel and Materials Laboratory, Nuclear Power Institute of China) Peng, Xiaoming (Science and Technology on Reactor Fuel and Materials Laboratory, Nuclear Power Institute of China) |
1 | H. Ozaltun, M.H. Shen, P. Medvedev, Assessment of residual stresses on U10Mo alloy based monolithic minidplates during hot isostatic pressing, J. Nucl. Mater. 419 (1-3) (2011) 76-84. DOI |
2 | Y. Zhao, X. Gong, S. Ding, Simulation of the irradiation-induced thermo-mechanical behaviors evolution in monolithic UeMo/Zr fuel plates under a heterogeneous irradiation condition, Nucl. Eng. Des. 285 (2015) 84-97. DOI |
3 | J.F. Jue, D.D. Keiser Jr., C.R. Breckenridge, et al., Microstructural characteristics of HIP-bonded monolithic nuclear fuels with a diffusion barrier, J. Nucl. Mater. 448 (1-3) (2014) 250-258. DOI |
4 | M.K. Meyer, J. Gan, J.F. Jue, et al., Irradiation performance of U-Mo monolithic fuel, Nucl. Eng. Technol. 46 (2) (2014) 169-182. DOI |
5 | Y. Park, J. Yoo, K. Huang, et al., Growth kinetics and microstructural evolution during hot isostatic pressing of U-10 wt.% Mo monolithic fuel plate in AA6061 cladding with Zr diffusion barrier, J. Nucl. Mater. 447 (1-3) (2014) 215-224. DOI |
6 | D.A. Lopes, A.J.O. Zimmermann, S.L. Silva, J.R.C. Piqueira, Thermal cycling effect in U-10Mo/Zry-4 monolithic nuclear fuel, J. Nucl. Mater. 473 (2016) 136-142. DOI |
7 | D. Keiser, F. Rice, CNEA Fresh Fuel Plate Characterization Summary Report, Idaho National Laboratory (INL), 2012. |
8 | H.D. Manesh, H.S. Shahabi, Effective parameters on bonding strength of roll bonded Al/St/Al multilayer strips, J. Alloy. Comp. 476 (1-2) (2009) 292-299. DOI |
9 | H.Z. Yan, J.G. Lenard, A study of warm and cold roll-bonding of an aluminium alloy, Mater. Sci. Eng., A 385 (1-2) (2004) 419-428. DOI |
10 | N. Bay, Cold pressure weldingdthe mechanisms governing bonding, J. Eng. Ind. 101 (2) (1979). |
11 | N. Bay, C. Clemensen, O. Juelstorp, T. Wanheim, Bond strength in cold roll bonding, CIRP Ann. - Manuf. Technol. 34 (1) (1985) 221-224. DOI |
12 | M. Abbasi, M.R. Toroghinejad, Effects of processing parameters on the bond strength of Cu/Cu roll-bonded strips, J. Mater. Process. Technol. 210 (3) (2010) 560-563. DOI |
13 | R. Jammaati, M.R. Toroghinejad, Investigation of the parameters of the cold roll bonding (CRB) process, Mater. Sci. Eng. 527 (9) (2010) 2320-2326. DOI |
14 | G. Zhou, L. Hua, D. Qian, et al., Effects of axial rolls motions on radialeaxial rolling process for large-scale alloy steel ring with 3D coupled thermomechanical FEA, Int. J. Mech. Sci. 59 (1) (2012) 1-7. DOI |
15 | D.L. Hagrman, G.A. Reyman, MATPRO-Version11, A Handbook of Materials, Properties for use in the analysis of light water reactor fuel rod behavior, NUREG/CR-0497, TREE-1280, 1979, Rev.3. |
16 | J.P. Hambleton, A. Drescher, On modeling a rolling wheel in the presence of plastic deformation as a three- or two-dimensional process, Int. J. Mech. Sci. 51 (11-12) (2009) 846-855. DOI |
17 | K. Arola, R. von Hertzen, Development of sheet tension under a rolling nip on a paper stack, Int. J. Mech. Sci. 47 (1) (2005) 110-133. DOI |
18 | Z. Zhuang, X.C. You, J.H. Liao, et al., Finite Element Analysis and Application Based on ABAQUS, Tsinghua University Press, Beijing, 2009. |
19 | J. Wan, X. Kong, S. Ding, et al., Numerical simulation research on rolling process of monolithic nuclear fuel plate, Atomic Energy Sci. Technol. 49 (3) (2015) 511-517. |
20 | X. Kong, H. Yang, S. Ding, Zircaloy plate rolling simulation with an effective strain-rate-dependent stress-updating algorithm, Int. J. Nonlinear Sci. Numer. Stimul. 17 (2) (2016) 113-125. |