• 제목/요약/키워드: DLL4

검색결과 61건 처리시간 0.027초

A Multiphase Compensation Method with Dynamic Element Matching Technique in Σ-Δ Fractional-N Frequency Synthesizers

  • Chen, Zuow-Zun;Lee, Tai-Cheng
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제8권3호
    • /
    • pp.179-192
    • /
    • 2008
  • A multiphase compensation method with mismatch linearization technique, is presented and demonstrated in a $\Sigma-\Delta$ fractional-N frequency synthesizer. An on-chip delay-locked loop (DLL) and a proposed delay line structure are constructed to provide multiphase compensation on $\Sigma-\Delta$ quantizetion noise. In the delay line structure, dynamic element matching (DEM) techniques are employed for mismatch linearization. The proposed $\Sigma-\Delta$ fractional-N frequency synthesizer is fabricated in a $0.18-{\mu}m$ CMOS technology with 2.14-GHz output frequency and 4-Hz resolution. The die size is 0.92 mm$\times$1.15 mm, and it consumes 27.2 mW. In-band phase noise of -82 dBc/Hz at 10 kHz offset and out-of-band phase noise of -103 dBc/Hz at 1 MHz offset are measured with a loop bandwidth of 200 kHz. The settling time is shorter than $25{\mu}s$.

A CMOS Impulse Radio Ultra-Wideband Receiver for Inner/Inter-chip Wireless Interconnection

  • Nguyen, Chi Nhan;Duong, Hoai Nghia;Dinh, Van Anh
    • 전기전자학회논문지
    • /
    • 제17권2호
    • /
    • pp.176-181
    • /
    • 2013
  • This paper presents a CMOS impulse radio ultra-wideband (IR-UWB) receiver implemented using IBM 0.13um CMOS technology for inner/inter-chip wireless interconnection. The IR-UWB receiver is based on the non-coherent architecture which removes the complexity of RF architecture (such as DLL or PLL) and reduces power consumption. The receiver consists of three blocks: a low noise amplifier (LNA) with active balun, a correlator, and a comparator. Simulation results show the die area of the IR-UWB receiver of 0.2mm2, a power gain (S21) of 12.5dB, a noise figure (NF) of 3.05dB, an input return loss (S11) of less than -16.5dB, a conversion gain of 18dB, a NFDSB of 22. The receiver exhibits a third order intercept point (IIP3) of -1.3dBm and consumes 22.9mW of power on the 1.4V power supply.

A New Approach to CAD/CAM Systems Data Exchange Using Plug-in Technology

  • Chernopyatov Y.A.;Chung W.j.;Lee C.M.
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제6권4호
    • /
    • pp.8-13
    • /
    • 2005
  • Interoperability has been the problem of CAD/CAM systems. Starting from 1980's, national and international organizations have addressed the issue through development and release of standards for the exchange of geometric and nongeometric design data. To CAD/CAM vendors, the task of interpreting and implementing these standards falls into their products. This task is a balancing action between users' needs, available development resources, and the technical specifications of standards. This paper explores an area of CAD/CAM systems development, particularly the implementation of the effective exchange files translators'. A new approach is introduced, which proposes to enclose all the translation operations concerning each exchange format to a separate DLL, thus making a 'plug-in.' Then, this plug-in could be used together with the CAD/CAM system or with specialized translation software. This approach allows to create new translators rapidly and to gain the reliable, high-efficiency, and reusable program code. The second part of the paper concerns the possible problems of translators' development. These difficulties often come from the exchange standards' misunderstanding or ambiguity in standards. All examples come from the authors' practice experiences of dealing with CAD/CAM systems.

소아에서 담췌관 질환에 대한 자기공명 담췌관조영술의 진단적 유용성 (The Usefulness of MRCP in the Evaluation of Pancreaticobiliary Diseases in Children)

  • 엄지현;이승연;정기섭
    • Clinical and Experimental Pediatrics
    • /
    • 제45권11호
    • /
    • pp.1381-1388
    • /
    • 2002
  • 목 적: MRCP는 간담도췌장 질환을 진단하는데 있어서 비침습적인 방법으로 매우 유용한 것으로 알려져 있다. 본 연구의 목적은 간담도췌장 질환이 의심되는 소아에서 MRCP의 진단적 유용성에 대해 알아보고자 한다. 방 법: 1996년 10월부터 2001년 5월까지 연세의대 세브란스병원 소아과에 간담도췌장 질환으로 입원하여 복부 초음파 및 MRCP를 시행한 환아 70례를 대상으로 하였다. 환아의 최종 진단은 수술, 조직검사 소견, 임상 소견, 기타 검사 등을 토대로 하였다. 결 과 : 1) 대상 환아는 총 70례로 남녀비는 1 : 1.2였으며 평균 연령은 $2.6{\pm}3.3$세였다. 2) 간기능 검사상 혈청 AST, ALT 치는 각각 $192.7{\pm}139.6IU/L$, $182.7{\pm}143.8IU/L$이었고, 총 빌리루빈치, 직접 빌리루빈치는 각각 $6.9{\pm}3.7mg/dll$, $4.8{\pm}2.4mg/dll$이었다. 3) 간담도 췌장질환의 원인은 담도폐쇄증 25례(35.7%), 신생아 간염 18례(25.7%), 담관낭종 16례(23%)로 이 중 APBDU를 동반한 경우가 7례(10.0%), APBDU를 동반하지 않은 경우가 6례(12.9%)였으며, 전염성 단핵구증, 전격성 간염, 콕시엘라증(coxiellosis) 등으로 인한 담즙 정체성 간염이 5례(7.1%), 경화성 담도염이 2례(2.8%), 이차성 담도 경화증은 1례(1.4%), 만성 재발성 췌장염 환아가 3례(4.3%)였다. 4) 수술 소견과 병리 조직학적 소견을 기준으로 할 때 간담도췌장질환에 대한 복부 초음파의 진단의 정확도 75.7%에 비해 MRCP는 97.1%로 높았다. MRCP의 예민도와 특이도는 담도폐쇄증의 경우 각각 100%, 98%였고, APBDU가 동반된 담관낭종의 경우 87.5%, 100%였으며, APBDU가 동반되지 않은 담관낭종, 경화성 담도염, 만성 반복성췌장염은 양자 모두 100%였다. 결 론 : 본 연구에서 MRCP는 간담도췌장 질환을 진단하는데 있어서 편리하고 안전하며 비침습적인 방법으로서 그 진단율 또한 다른 검사에 비해 뛰어나 소아에서 간담도췌장질환이 의심될 때 우선적으로 시행할 수 있는 매우 유용한 검사임을 알 수 있었다.

Multi-channel 5Gb/s/ch SERDES with Emphasis on Integrated Novel Clocking Strategies

  • Zhang, Changchun;Li, Ming;Wang, Zhigong;Yin, Kuiying;Deng, Qing;Guo, Yufeng;Cao, Zhengjun;Liu, Leilei
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권4호
    • /
    • pp.303-317
    • /
    • 2013
  • Two novel clocking strategies for a high-speed multi-channel serializer-deserializer (SERDES) are proposed in this paper. Both of the clocking strategies are based on groups, which facilitate flexibility and expansibility of the SERDES. One clocking strategy is applicable to moderate parallel I/O cases, such as high density, short distance, consistent media, high temperature variation, which is used for the serializer array. Each group within the strategy consists of a full-rate phase-locked loop (PLL), a full-rate delay-locked loop (DLL), and two fixed phase alignment (FPA) techniques. The other is applicable to more awful I/O cases such as higher speed, longer distance, inconsistent media, serious crosstalk, which is used for the deserializer array. Each group within the strategy is composed of a PLL and two DLLs. Moreover, a half-rate version is chosen to realize the desired function of 1:2 deserializer. Based on the proposed clocking strategies, two representative ICs for each group of SERDES are designed and fabricated in a standard $0.18{\mu}m$ CMOS technology. Measurement results indicate that the two SERDES ICs can work properly accompanied with their corresponding clocking strategies.

위상변조를 이용한 저 전력 입출력 인터페이스 회로 (Low Power Serial Interface I/O by using Phase Modulation)

  • 박형민;강진구
    • 대한전자공학회논문지SD
    • /
    • 제48권2호
    • /
    • pp.1-6
    • /
    • 2011
  • 본 논문은 위상 변조를 이용한 직렬 인터페이스 입출력 회로를 설계 하였다. 설계된 직렬 입출력 인터페이스 회로는 수신부와 송신부로 구성되어 있다. 제안하는 위상변조 데이터 전송 방식은 상승 에지 위상은 고정시켜 클록 정보로 사용하고 하강에지 위상을 전송되는 데이터에 따라 변조하여 오프-칩 인터페이스에서도 적용 가능한 효율적인 데이터 전송 방식을 사용한다. 제안하는 회로는 16개의 하강 에지 위상을 사용하여 한 클록 주기마다 4비트씩 데이터를 전송함으로써 시스템에서 사용되는 클록 속도보다 4배 빠른 전송 속도를 갖는 저 전력 회로다. 본 논문에서는 0.13um CMOS 공정을 이용하여 설계 및 검증을 수행 하였고, 칩 면적 $2mm^2$ 하에서 1Gb/s 전송 속도와 12mW의 소비 전력을 갖는다.

DVB-RCS +M 표준기반의 대역확산기술 부호동기기법 (Code synchronization technique for spread spectrum transmission based on DVB-RCS +M standard)

  • 김판수;장대익;이호진
    • 한국위성정보통신학회논문지
    • /
    • 제4권2호
    • /
    • pp.39-45
    • /
    • 2009
  • 본 논문은 DVB-RCS +M 표준에서 제안된 직접수열기반의 대역확산기술 중 코드 동기 기술에 관한 것이다. 직접수열기반의 대역확산기술은 다중반송파기반의 대역확산기술에 비해 비선형증폭기의 영향을 덜 받으나 수신단에서 코드 동기 시간 측면에서 불리하다. 이러한 어려움을 개선해보고자 초기 코드 포착을 위한 강인한 상관기 구조가 제안되고 코드 추적을 위한 비동기 DLL(Delay Lock Loop)이 제안된다. 본 기법을 바탕으로 평균 포착 시간 등의 결과를 제시하고 샘플 클럭 타이밍 오차에 영향을 받지 않는 2 오버샘플기반의 코드 추적회로의 구조와 결과도 제시한다.

  • PDF

Antifuse Circuits and Their Applicatoins to Post-Package of DRAMs

  • Wee, Jae-Kyung;Kook, Jeong-Hoon;Kim, Se-Jun;Hong, Sang-Hoon;Ahn, Jin-Hong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제1권4호
    • /
    • pp.216-231
    • /
    • 2001
  • Several methods for improving device yields and characteristics have been studied by IC manufacturers, as the options for programming components become diversified through the introduction of novel processes. Especially, the sequential repair steps on wafer level and package level are essentially required in DRAMs to improve the yield. Several repair methods for DRAMs are reviewed in this paper. They include the optical methods (laser-fuse, laser-antifuse) and the electrical methods (electrical-fuse, ONO-antifuse). Theses methods can also be categorized into the wafer-level(on wafer) and the package-level(post-package) repair methods. Although the wafer-level laser-fuse repair method is the most widely used up to now, the package-level antifuse repair method is becoming an essential auxiliary technique for its advantage in terms of cost and design efficiency. The advantages of the package-level antifuse method are discussed in this paper with the measured data of manufactured devices. With devices based on several processes, it was verified that the antifuse repair method can improve the net yield by more than 2%~3%. Finally, as an illustration of the usefulness of the package-level antifuse repair method, the repair method was applied to the replica delay circuit of DLL to get the decrease of clock skew from 55ps to 9ps.

  • PDF

MPEG-H 3D 오디오 표준 복호화기 구조 및 연산량 분석 (MPEG-H 3D Audio Decoder Structure and Complexity Analysis)

  • 문현기;박영철;이용주;황영수
    • 한국통신학회논문지
    • /
    • 제42권2호
    • /
    • pp.432-443
    • /
    • 2017
  • MPEG-H 3D 오디오 표준은 UHDTV 등의 초고해상도 방송서비스에 대응하는 실감음향 서비스의 제공을 목표로 한다. 이를 위해 본 표준은 다채널 신호, 객체 신호, 장면 기반 신호의 부호화/복호화 기술과 다양한 재생 환경에서 3차원 오디오 제공을 위한 렌더링 기술, 후처리 기술 등 방대한 기술을 통합하였다. 본 표준의 참조 소프트웨어 복호화기는 여러 모듈들이 결합된 구조로 다양한 모드에서 동작이 가능하며, 각 모듈들이 독립된 실행파일로 순차적으로 실행되어 실시간 처리가 불가능하다. 본 논문에서는 MPEG-H 3D 오디오의 코어 복호화기, 포맷 변환기, 객체 렌더러, 바이노럴 렌더러의 각 함수를 동적 라이브러리화 및 통합하여 프레임 기반 복호화가 가능하도록 하였다. 또한 MPEG-H 3D 오디오의 각 모드별 연산량을 측정하여 다양한 하드웨어 플랫폼에서 적합한 모드를 선택하기 위한 참고 자료를 제공한다. 연산량 분석 결과, 한국 방송 표준에 포함된 저연산량 프로파일은 채널 신호로 렌더링을 할 경우 QMF 합성 연산의 2.8배에서 12.4배의 연산량을 가지며, 바이노럴 렌더링을 할 경우 QMF 합성 연산의 4.1배에서 15.3배의 연산량을 가진다.

Dietary corn resistant starch regulates intestinal morphology and barrier functions by activating the Notch signaling pathway of broilers

  • Zhang, Yingying;Liu, Yingsen;Li, Jiaolong;Xing, Tong;Jiang, Yun;Zhang, Lin;Gao, Feng
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권12호
    • /
    • pp.2008-2020
    • /
    • 2020
  • Objective: This study was conducted to investigate the effects of dietary corn resistant starch (RS) on the intestinal morphology and barrier functions of broilers. Methods: A total of 320 one-day-old broilers were randomly allocated to 5 dietary treatments: one normal corn-soybean (NC) diet, one corn-soybean-based diet supplementation with 20% corn starch (CS), and 3 corn-soybean-based diets supplementation with 4%, 8%, and 12% corn resistant starch (RS) (identified as 4% RS, 8% RS, and 12% RS, respectively). Each group had eight replicates with eight broilers per replicate. After 21 days feeding, one bird with a body weight (BW) close to the average BW of their replicate was selected and slaughtered. The samples of duodenum, jejunum, ileum, caecum digesta, and blood were collected. Results: Birds fed 4% RS, 8% RS and 12% RS diets showed lower feed intake, BW gain, jejunal villus height (VH), duodenal crypt depth (CD), jejunal VH/CD ratio, duodenal goblet cell density as well as mucin1 mRNA expressions compared to the NC group, but showed higher concentrations of cecal acetic acid and butyric acid, percentage of jejunal proliferating cell nuclear antigen-positive cells and delta like canonical Notch ligand 4 (Dll4), and hes family bHLH transcription factor 1 mRNA expressions. However, there were no differences on the plasma diamine oxidase activity and D-lactic acid concentration among all groups. Conclusion: These findings suggested that RS could suppress intestinal morphology and barrier functions by activating Notch pathway and inhibiting the development of goblet cells, resulting in decreased mucins and tight junction mRNA expression.