• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.980-986
• /
• 2007

Boundary scan test structure(JTAG IEEE 1149.1 standard) that supports an internal scan chain is generally being used to test CUT(circuit under test). Since the internal scan chain can only have a single scan-in port and a single scan-out port; however, existing boundary test methods can not be used when multiple scan chains are present in CUT. Those chains must be stitched to form a single scan chain as shown in this paper. We propose an efficient boundary scan test structure that adds a circuit called Clock Group Register(CGR) for multiple clocks testing within the design of multiple scan chains. The proposed CGR has the function of grouping clocks. By adding CGR to a previously existing boundary scan design, the design is modified. This revised scan design overcomes the limitation of supporting a single scan-in port and out port, and it bolsters multiple scan-in ports and out ports. Through our experiments, the effectiveness of CGR is proved. With this, it is possible to test more complicated designs that have high density with a little effort. Furthermore, it will also benefit in designing those complicated circuits.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.99-108
• /
• 2015

The embedded microcontroller which is operated by the logic gates synchronized on the clock pulse, is gradually used as main controller of mission-critical systems. Severe electrical situations such as high voltage/frequency surge may cause malfunctioning of the clock source. The tolerant system operation is required against the various external electric noise and means the robust design technique is becoming more important issue in system clock failure problems. In this paper, we propose on-chip backup clock change architecture for the automatic clock failure detection. For the this, we adopt the edge detector, noise canceller logic and glitch-free clock changer circuit. The implemented edge detector unit detects the abnormal low-frequency of the clock source and the delay chain circuit of the clock pulse by the noise canceller can cancel out the glitch clock. The externally invalid clock source by detecting the emergency status will be switched to back-up clock source by glitch-free clock changer circuit. The proposed circuits are evaluated by Verilog simulation and the fabricated IC is validated by using test equipment electrical field radiation noise

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1123-1130
• /
• 2015

Network on a chip(NoC) is a communication subsystem between intellectual property(IP) cores in a SoC and improves high performance in the scalability and the power efficiency compared with conventional buses and crossbar switches. NoC needs a synchronizer to overcome the metastability problem between data links. This paper presents a new mesochronous synchronizer(MS) which is composed of selection window generator, selection signal generator, and data buffer. A delay line circuit is used to build selection window in selection window generator based on the delayed clock cycle of transmitted clock and the transmitted clock is compared with local clock to generate a selection signal in the SW(selection window). This MS gets rid of the restriction of metastability by choosing a rising edge or a falling edge of local clock according to the value of selection signal. The simulation results show that the proposed MS operates correctly for all phase differences between a transmitted clock and a local clock.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.268-274
• /
• 2008

This paper proposes an open-loop clock recovery circuit (CRC) using two high-Q dielectric resonator (DR) filters for 39.8 Gb/s and 42.8 Gb/s dual-mode operation. The DR filters are fabricated to obtain high Q-values of approximately 950 at the 40 GHz band and to suppress spurious resonant modes up to 45 GHz. The CRC is implemented in a compact module by integrating the DR filters with other circuits in the CRC. The peak-to-peak and RMS jitter values of the clock signals recovered from 39.8 Gb/s and 42.8 Gb/s pseudo-random binary sequence (PRBS) data with a word length of $2^{31}-1$ are less than 2.0 ps and 0.3 ps, respectively. The peak-to-peak amplitudes of the recovered clocks are quite stable and within the range of 2.5 V to 2.7 V, even when the input data signals vary from 150 mV to 500 mV. Error-free operation of the 40 Gb/s-class optical receiver with the dual-mode CRC is confirmed at both 39.8 Gb/s and 42.8 Gb/s data rates.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.82-86
• /
• 2009

This work is design of clock and data recovery circuit using system clock. This circuit is composed by PLL(Phase Locked Loop) to make system clock and data recovery circuit. The data recovery circuit using 1/4-rate phase picking Detector helps to reduce clock frequency. It is advantageous for high speed PLL. It can achieve a low jitter operation. The designed CDR(Clock and data recovery) has been designed in a standard $0.18{\mu}m$ 1P6M CMOS technology and an active area $1{\times}1mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.1001-1008
• /
• 1991

.In this paper the efficient clock recovery algorithm is proposed to regenerate the manchester code at the system using the Manchester encoding scheme such as LAN. Mobile communication and digital communication systems. The proposed clock recovery circuit recovers the clock using the two times of the same original transmitted frequency can be completely recovered. The implementation of the proposed clock recovery circuit and the interpretation of test results prove the validity of the proposed algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.451-454
• /
• 2011

In this paper, a wideband clock generator using novel Automatic frequency calibration(AFC) scheme is proposed. Wideband clock generator using AFC has the advantage of small VCO gain and wide frequency band. The conventional AFC compares whether the feedback frequency is faster or slower then the reference frequency. However, the proposed AFC can detect frequency difference between reference frequency with feedback frequency. So it can be reduced an operation time than conventional methods AFC. Conventional AFC goes to the initial code if the frequency step changed. This AFC, on the other hand, can a prior state code so it can approach a fast operation. In simulation results, the proposed clock generator is designed for DisplayPort using the CMOS ring-VCO. The VCO tuning range is 350MHz, and a VCO frequency is 270MHz. The lock time of clock generator is less then 3us at input reference frequency, 67.5MHz. The phase noise is -109dBC/Hz at 1MHz offset from the center frequency. and power consumption is 10.1mW at 1.8V supply and layout area is $0.384mm^2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.889-895
• /
• 2019

It is not easy to keep time promises in the complex daily lives. Especially, the increase in the number of vehicles causes traffic congestion in commuting time, which results in the delayed arrival and varies greatly depending on the weather conditions. In this paper, proposed is a smart alarm clock that automatically adjusts the alarm time according to weather conditions and suggests ways to deal with traffic congestion. The proposed smart alarm clock is designed to operate the functions of a normal alarm clock using touch functionality. In addition, it is designed to find weather information using open API and to automatically change alarm time to prepare for expected time delay. The proposed design was implemented based on Arduino Mega2560 and a touch TFT-LCD. WiFi module for internet connection, RTC module for clock function and MP3 player module for alarm sound playback were used together. The proposed design has been filed as a patent and is currently under review.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.277-280
• /
• 2001

The proposed clock generator lowers the operating frequency in a system core though it keeps data bandwidth high because it has a multiphase clocking architecture. Moreover. it has a dual loop which is comprised of an inner analog phase generation loop and outer digital phase control loop. It has both advantages of DLL's wide operating range and DLL's low jitter The proposed design has been demonstrated in terms of the concept and Hspice simulation. All circuits were designed using a 0.25${\mu}{\textrm}{m}$ CMOS process and simulated with 2.5 V power supply.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.733-736
• /
• 1999

In this Paper, Bit selectable and Bi-directional Interface Port is described, which can communicate data with the peripheral devices. Specially A description of the asynchronous design method is given to remove the clock skew phenomenon and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.5㎱.