• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.101-105
• /
• 2009

A 1.571GHz LC VCO with optimized spiral inductor for GPS receiver is designed in 130nm CMOS process. The phase noise of the VCO has been reduced the use of high Q inductor and on chip filter. It has phase noise of -91dBc/Hz, -111dBc/Hz, and -131dBc/Hz at 10kHz, 100kHz, and 1MHz offset frequencies from the carrier, respectively. This VCO consumes 2mA from a 0.6V supply.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.755-758
• /
• 2002

This paper presents a second-generation CMOS current conveyor (CCII) consisting of a rail-to-rail complementary N- and P-channel differential input stage for the voltage input, a class AB push-pull stage for the current input, and current mirrors far the current outputs. The CCII was implemented using a double-poly triple-metal 0.6 ${\mu}$m n-well CMOS process, to confirm its operation experimentally. A prototype chip achieves a rail-to-rail swing ${\pm}$2.4 V under ${\pm}$2.5 V power supplies and shows the exact voltage and current following performances up to 100 MHz. Because of its high performances, the CCII proposed herein is quite useful for a building block of current-mode circuits. The applications of the proposed CCII to current-mode filters are also described.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.145-148
• /
• 2002

In this paper, a voltage controlled oscillator (VCO) with automatic amplitude control is designed using a 0.35${\mu}{\textrm}{m}$ CMOS process. A cross-coupled PMOS pair is used for a negative resistance to compensate for the losses in the LC resonator, and an automatic\ulcorner amplitude control function is adapted to provide constant output power independent of the Q-factor of the LC resonator. The designed VCO operates in the 200MHz to 550MHz frequency range using different external resonators. The simulated phase noise is -128 dBc/Hz at 100KHz offset from the carrier frequency of 260MHz. It dissipates 0.㎽ from a 3V power supply. The area is 300${\mu}{\textrm}{m}$ x1201${\mu}{\textrm}{m}$.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.671-674
• /
• 2003

본 논문에서는 Cobalt interlayer 와 Titanium Nitride(TiN) capping layer를 Ni SALICIDE의 단점인 열 안정성과 sheet resistance 와 series 저항을 감소시키는데 적용하여 0.lum 급 CMOS 소자의 특성을 연구하였다. 첫째로, Ni/Si 의 interface 에 Co interlayer 를 증착하여 Nickel Silicide의 단점인 열 안정성 평가인 700℃, 30min의 furnace annealing 후에 낮은 sheet resistance와 누설전류를 줄일 수 있었다. 두번째로, TiN caping layer를 적용하여 실리사이드 형성시 산소와의 반응을 막아 실리사이드의 표면특성을 향상시켜 누설전류의 특성을 개선하였다. 결과적으로 소자의 구동전류 향상, 누설전류 저하, 낮은 면저항으로 소자의 특성을 개선하였다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1141-1144
• /
• 2003

For proper communication with various types of IC-Card, multiple IC-Card interface complying with the IC-Card standard (ISO7816) is embedded and realized as a peripheral on the 32-bit RISC based system-on-a-chip. It provides the generation of either 3.3V or 5V power supply for the operation of the inserted IC-Card as well. IC-Card interface is divided into an analog front-end (AFE) and a digital back-end (DBE). The embedded DC-DC converters suitable for driving IC-Cards are incorporated in the AFE. The chip design for multiple IC-Card interface is implemented on a standard 0.35${\mu}{\textrm}{m}$ triple-metal double-poly CMOS process and is packaged in a 352-pin plastic ball grid array (PBGA). The total gate count is about 400,000, excluding the internal memory. Die area is 7890${\mu}{\textrm}{m}$ $\times$ 7890${\mu}{\textrm}{m}$.

• ETRI Journal
• /
• v.20 no.1
• /
• pp.37-45
• /
• 1998

Reduced surface field lateral double-diffused MOS transistor for the driving circuits of plasma display panel and field emission display in the 120V region have been integrated for the first time into a low-voltage $1.2{\mu}m$ analog CMOS process using p-type bulk silicon. This method of integration provides an excellent way of achieving both high power and low voltage functions on the same chip; it reduces the number of mask layers double-diffused MOS transistor with a drift length of $6.0{\mu}m$ and a breakdown voltage greater than 150V was self-isolated to the low voltage CMOS ICs. The measured specific on-resistance of the lateral double-diffused MOS in $4.8m{\Omega}{\cdot}cm^2$ at a gate voltage of 5V.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.518-526
• /
• 2012

This paper proposes LC voltage-controlled oscillator (VCO) phase-locked loop (PLL) and ring-VCO PLL topologies with low-phase noise. Differential control loops are used for the PLL locking through a symmetrical transformer-resonator or bilaterally controlled varactor pair. A differential compensation mechanism suppresses out-band spurious tones. The prototypes of the proposed PLL are implemented in a CMOS 65-nm or 45-nm process. The measured results of the LC-VCO PLL show operation frequencies of 3.5 GHz to 5.6 GHz, a phase noise of -118 dBc/Hz at a 1 MHz offset, and a spur rejection of 66 dBc, while dissipating 3.2 mA at a 1 V supply. The ring-VCO PLL shows a phase noise of -95 dBc/Hz at a 1 MHz offset, operation frequencies of 1.2 GHz to 2.04 GHz, and a spur rejection of 59 dBc, while dissipating 5.4 mA at a 1.1 V supply.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.11-15
• /
• 2002

3 V, 2.46GHz Low Noise Amplifier (LNA) have been designed for standard 0.35$\mu\textrm{m}$ CMOS process with one poly and four metal layers. This design includes on-chip biasing, matching network and multilayer spiral inductors. The single-ended amplifier provides a forward gain of 20.5dB with a noise figure 3.35dB, and an IIP3 of -6dBm while drawing 59mW total Power consumption

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.21-24
• /
• 2002

This paper presents a fully integrated, wide tuning range differential CMOS voltage-controlled oscillator, tuned by pMOS-varactors. VCO utilizing a novel tuning scheme is reported. Both coarse digital tuning and fine analog tuning are achieved using pMOS-varactors. The VCO were implemented in a 0.18-fm standard CMOS process. The VCO tuned from 1.8㎓ to 2.55㎓ through 2-bit digital and analog input. At 1.8V power supply voltage and a total power dissipation of 8mW, the VCO features a phase noise of -126㏈c/㎐ at 3㎒ frequency offset.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.42-50
• /
• 2003

This paper presents an embedded RC oscillator which has temperature compensation circuits. The conventional RC oscillator has frequency deviation about 15%, which is caused by variation of resistors and the reference voltage of schmitt trigger from the temperature condition. In this paper, the proposed circuit use a CMOS bandgap reference having balanced current temperature coefficients as a triggering voltage of schmitt trigger. The constant current sources consist of current mirror circuit with the positive and negative temperature coefficient. The proposed circuit shows less 3% frequency deviation for variation of temperature, supply voltage and process parameters.