• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.39-46
• /
• 1997

In this study, Two types of polyester fabrics were hydrolysed with NaOH using the CDR m/c of pad-steam type and the Sofleena m/c of liquor-flow type to determine the alkali hydrolysis properties of polyester fabrics. The results were as follows: Under the same conditions, the weight loss of charmeuse was about 0.5% and 2~3% higher than that of pebble with CDR m/c and with Sofleena m/c, respectively. The weft density of pebble decreased about 14picks/inch with CDR m/c and 3picks/inch with Sofleena m/c comparing to the untreated sample at 18% of weight loss, while the weft density of charmeuse decreased about 5picks/inch with CDR m/c and 2picks/inch with Sofleena m/c at 20% of weight toss. K/S value decreased almost identically within about 11% weight loss of pebble and 8% of charmeuse processed with both CDR and Sofleena. However, in the above these weight losses, K/S value of the fabrics processed with Sofleena was higher than that of fabrics processed with CDR. The bending rigidity of warp direction of the fabrics ($2{\times}10^{-2}gf.cm^2 /cm$ higher for charmeuse and ($7{\times}10^{-3}gf.cm^2 /cm$ higher for pebble) processed with CDR m/c was higher than that of the fabrics processed with Sofleena m/c.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.72-77
• /
• 2009

In this paper, a 3.2Gb/s clock and data recovery (CDR) circuit for a high-speed serial data communication without the reference clock is described This CDR circuit consists of 5 parts as Phase and frequency detector(PD and FD), multi-phase Voltage Controlled-Oscillator(VCO), Charge-pumps (CP) and external Loop-Filter(KF). It is adapted the PD and FD, which incorporates a half-rate bang-bang type oversampling PD and a half-rate FD that can improve pull-in range. The VCO consists of four fully differential delay cells with rail-to-rail current bias scheme that can increase the tuning range and tuning linearity. Each delay cell has output buffers as a full-swing generator and a duty-cycle mismatch compensation. This materialized CDR can achieve wide pull-in range without an extra reference clock and it can be also reduced chip area and power consumption effectively because there is no additional Phase Locked- Loop(PLL) for generating reference clock. The CDR circuit was designed for fabrication using 0.18um 1P6M CMOS process and total chip area excepted LF is $1{\times}1mm^2$. The pk-pk jitter of recovered clock is 26ps at 3.2Gb/s input data rate and total power consumes 63mW from 1.8V supply voltage according to simulation results. According to test result, the pk-pk jitter of recovered clock is 55ps at the same input data-rate and the reliable range of input data-rate is about from 2.4Gb/s to 3.4Gb/s.

• IMMUNE NETWORK
• /
• v.3 no.2
• /
• pp.89-95
• /
• 2003

Background: Unusually high amounts of N region addition and CDR3 length diversity were found in immunoglobulin (Ig) light chain Vk and Jk joins in patients with rheumatoid arthritis (RA). We sought to determine whether this finding is due to excessive activity of the enzyme responsible for N region addition (terminal deoxynucleotidyl transferase [TdT]) in B lineage cells in bone marrow or from positive antigenic selection of B cells with long CDR3 lengths. Methods: We used FACS to isolate $IgM^+/IgD^+$ B cells (predominantly naive) and $IgM^-/IgD^-$ B cells (predominantly class-switched) B cells from peripheral blood of a patient with RA known to have enrichment for long Vk CDR3s and from that of two normal controls. RT-PCR of VkIII transcripts was performed, followed by sequencing of individual cDNA clones. We analyzed the CDR3 lengths and N region additions in 97 clones. Results: There was enrichment for long CDR3 lengths (11 or 12 amino acids) in both $IgM^+/IgD^+$ and $IgM^-/IgD^-$ B cells in RA compared to B cell subsets in the normal controls. The $IgM^+/IgD^+$ B cell subset in RA was markedly enriched for N region addition and was similar to that seen in the $IgM^-/IgD^-$ subset. Conclusion: These data suggest that enrichment for N region addition and long CDR3 lengths in RA may result from unusually high or prolonged activity of TdT in bone marrow.

• Advances in nano research
• /
• v.13 no.6
• /
• pp.527-543
• /
• 2022

A novel, green, versatile and magnetically retrievable BiFeO₃/CDR (Bismuth ferrite/coriander) nanocomposites were fabricated via simple wet chemical method utilizing in situ functionalized, cheap coriander seed powder (CDR 5%, 10%, 15% and 20 wt%) as a fuel to enhance the efficiency of pristine BiFeO₃. A comparative study was performed between BiFeO₃/CDR and BiFeO₃/CNT (Bismuth ferrite/carbon nanotubes) nanocomposites for the removal of various hazardous pollutants from waste water. The successful synthesis of the fabricated nanomaterials was monitored via FT-IR, Powder XRD, FE-SEM, CV, VSM, CHNS/O and XPS studies. The synthesized nanomaterials were employed for the oxidative degradation of Carbol fuchsin, Reactive black 5, Ciprofloxacin and Doxorubicin; adsorption of a pesticide malathion; and reduction studies for Para-nitrophenol (PNP). The fabricated nanomaterials (BiFeO₃/CDR) showcased excellent efficiency and comparable results with (BiFeO₃/CNT) for the removal of model pollutants. Moreover, synthesized green heterojunction was also testified for mixture of textile and pharmaceutical waste. Hence CDR can be utilized as a better alternative of CNTs.

• The Korean Journal of Rehabilitation Nursing
• /
• v.11 no.2
• /
• pp.90-98
• /
• 2008

Purpose: The purpose of this study was to examine the cognitive function and degree of dementia patient by doing clock drawing test and to explore the relationship among other dementia screening test. Method: The study subjects were 94 dementia in patients department. The data was collected by face to face interview by clinical psychologist from January 2007 to February 2008. The tools were Clock Drawing Test, K-MMSE, K-3MS and CDR Scale. Results: 1) The average score of CDT was 5.13 (2.54), of K-MMSE was 20.53 (4.85), of K-3MS was 61.66 (16.46), and of CDR was 1.2 (.72), those scores showed dementia. 2) There was a statistically the significant difference in CDT (F=2.83, p=.043) and CDR (F=2.00, p=.008) by age. CDT has shown the differences by gender (t=-2.42, p=.018) and education (F=7.66, p=.000). 3) There were significant relationships between CDT and K-MMSE (r=-.294. p=.004), K-3MS (r=-.335, p=.001), and CDR (r=.286, p=.008). Conclusion: It is believed that using CDT which measures the visuospatial ability of dementia patients and K-MMSE which assesses an ability of language and orientation and K-3MS at the same time helps examining the beginning and the progressive degree of dementia more easily and objectively.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.2
• /
• pp.49-61
• /
• 1997

The purpose of this study was to compare E-speed film, CDR, and modified CDR images by means of observing some artificial defects of alveolar bone wall in the sound human dried mandibles. High diagnostic accuracy was shown in 1 wall and 4 wall defects by all 5 observers (2 Radiologists, 2 Periodontists, 1 General practitioner), but the diagnosis in 2 wall and 3 wall defects was inaccurate. Modified CDR images had the more diagnostic accuracy than E-speed film and CDR images, but there was no statistical difference among them. Finally, radiologist used modified CDR images more than others and used equalization effect more than the change in contrast and/or brightness.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.188-193
• /
• 2003

This paper describes a novel burst-mode clock and data recovery (CDR) circuit which can be used for 622Mbps burst mode applications. The CDR circuit is basically a phase locked loop (PLL) having two phase detectors (PDs), one for the reference clock and the other for the NRZ data, whose operations are controlled by an external control signal. This CDR was fabricated in a 1-poly 5-metal $0.25{\;}\mu\textrm{m}$ CMOS technology. Jitter generation, burst/continuous mode data receptions were tested. Operational frequency range is 320Mhz~720Mhz and BER is less than 1e-12 for PRBS31 at 622Mhz. For the same data sequence, the extracted clock jitter is less than 8ps rms. Power consumption of 100mW was measured without I/O circuits.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.193-199
• /
• 2008

A combined clock and data recovery (CDR) circuit with adaptive cancellation of data-dependent jitter (DDJ) is constructed in all-digital architecture which is amenable to deep submicron technology. The DDJ canceller uses an adaptive FIR filter to compen-sate for any unknown channel characteristic. The proposed CDR decreases jitter in the recovered clock since the DDJ canceller significantly cancels out incoming jitter caused by inter-symbol interference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1266-1273
• /
• 2013

The purpose of this study was to analysis the effect of form of outsole - complex function double rocker sole(CDR) vs. negative-heel rocker sole (NR) - on energy consumption and heart rate intensity during gait. 11 women, who had no medical history on musculoskeletal disease and surgery within 3 years prior to study, were participated. The walking energy cost per time (WECt) during 35minutes, heart rate intensity, and total calorie consumption were compared by using pair t-test. The WECt and total calorie consumption were found to be significantly higher(p<.05) in CDR than NR. However, there was no difference in HRi. Based on the present study, CDR shoe may have significant implications in shoe prescription for people who want to increase energy consumption.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.35-43
• /
• 2012

This paper presents a delay-locked-loop-based clock and data recovery (CDR) circuit design with a nB(n+2)B data formatting scheme for a high-speed serial display interface. The nB(n+2)B data is formatted by inserting a '01' clock information pattern in every piece of N-bit data. The proposed CDR recovers clock and data in 1:10 demultiplexed form without an external reference clock. To validate the feasibility of the scheme, a 1.7-Gbps CDR based on the proposed scheme is designed, simulated, and fabricated. Input data patterns were formatted as 10B12B for a high-performance display interface. The proposed CDR consumes approximately 8 mA under a 3.3-V power supply using a 0.35-${\mu}m$ CMOS process and the measured peak-to-peak jitter of the recovered clock is 44 ps.