• 전자공학회논문지
• /
• 제53권7호
• /
• pp.131-137
• /
• 2016

본 논문에서는 기존의 2D IC의 성능을 개선하고 3D IC의 집적도와 전기적인 특성을 개선하기 위한 목적으로 연구되고 있는 TSV (Through Silicon Via)의 임피던스를 해석하였다. 향후 Full-chip 3D IC 시스템 설계에서 TSV는 매우 중요한 기술이며, 높은 집적도와 광대역폭 시스템 설계를 위해서 TSV에 대한 전기적인 특성에 관한 연구가 매우 중요하다. 따라서 본 연구에서는 Full-chip 3D IC를 설계하기 위한 목적으로 다중 TSV-to-TSV에서 거리와 주파수에 따른 TSV의 임피던스 영향을 해석하였다. 또한 이 연구 결과는 Full-chip 3D IC를 제조하기 위한 반도체 공정과 설계 툴에 적용할 수 있다.

• ETRI Journal
• /
• 제36권4호
• /
• pp.643-653
• /
• 2014

To reduce interconnect delay and power consumption while improving chip performance, a three-dimensional integrated circuit (3D IC) has been developed with die-stacking and through-silicon via (TSV) techniques. The power supply problem is one of the essential challenges in 3D IC design because IR-drop caused by insufficient supply voltage in a 3D chip reduces the chip performance. In particular, power bumps and TSVs are placed to minimize IR-drop in a 3D power delivery network. In this paper, we propose a design methodology for 3D power delivery networks to minimize the number of power bumps and TSVs with optimum mesh structure and distribute voltage variation more uniformly by shifting the locations of power bumps and TSVs while satisfying IR-drop constraint. Simulation results show that our method can reduce the voltage variation by 29.7% on average while reducing the number of power bumps and TSVs by 76.2% and 15.4%, respectively.

• 한국전자통신학회논문지
• /
• 제8권1호
• /
• pp.99-104
• /
• 2013

소형화된 고기능성 휴대용 전자기기의 수요 급증에 따라 기존에 사용되던 수평구조의 2차원 회로의 크기를 줄이는 것은, 전기 배선의 신호지연 증가로 한계에 도달했다. 이러한 문제를 해결하기 위해 회로들을 수직으로 적층한 뒤, 수평구조의 긴 신호배선을 짧은 수직 배선으로 만들어 신호지연을 최소화하는 3차원 집적 회로 적층기술이 새롭게 제안되었다. 본 연구에서는 차세대 반도체 소자의 회로 집적도를 비약적으로 증가시킬 수 있고, 현재 문제점으로 대두 되고 있는 선로의 증가, 소비전력, 소자의 소형화, 다기능 회로 문제를 동시에 해결 할 수 있는 3차원 구조를 갖는 회로소자에 대한 특성을 연구하였다.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.35-43
• /
• 2017

The three-dimensional integrated circuit (3D-IC) is a general trend for the miniaturized and high-performance electronic devices. The through-silicon-via (TSV) is the advanced interconnection method to achieve 3D integration, which uses vertical metal via through silicon substrate. However, the TSV based 3D-IC undergoes severe thermo-mechanical stress due to the CTE (coefficient of thermal expansion) mismatch between via and silicon. The thermo-mechanical stress induces mechanical failure on silicon and silicon-via interface, which reduces the device reliability. In this paper, the thermo-mechanical reliability of TSV based 3D-IC is reviewed in terms of mechanical fracture, heat conduction, and material characteristic. Furthermore, the state of the art via-level and package-level design techniques are introduced to improve the reliability of TSV based 3D-IC.

• Journal of information and communication convergence engineering
• /
• 제12권1호
• /
• pp.46-52
• /
• 2014

This article presents key research needs in three-dimensional integrated circuit (3D IC) architectural floorplanning. Architectural floorplaning is done at a very early stage of 3D IC design process, where the goal is to quickly evaluate architectural designs described in register-transfer level (RTL) in terms of power, performance, and reliability. This evaluation is then fed back to architects for further improvement and/or modifications needed to meet the target constraints. We discuss the details of the following research needs in this article: block-level modeling, through-silicon-via (TSV) insertion and management, and chip/package co-evaluation. The goal of block-level modeling is to obtain physical, power, performance, and reliability information of architectural blocks. We then assemble the blocks into multiple tiers while connecting them using TSVs that are placed in between hard IPs and inside soft IPs. Once a full-stack 3D floorplanning is obtained, we evaluate it so that the feedback is provided back to architects.

• ETRI Journal
• /
• 제34권5호
• /
• pp.706-712
• /
• 2012

In previous work, novel maskless bumping and no-flow underfill technologies for three-dimensional (3D) integrated circuit (IC) integration were developed. The bumping material, solder bump maker (SBM) composed of resin and solder powder, is designed to form low-volume solder bumps on a through silicon via (TSV) chip for the 3D IC integration through the conventional reflow process. To obtain the optimized volume of solder bumps using the SBM, the effect of the volumetric mixing ratio of resin and solder powder is studied in this paper. A no-flow underfill material named "fluxing underfill" is proposed for a simplified stacking process for the 3D IC integration. It can remove the oxide layer on solder bumps like flux and play a role of an underfill after the stacking process. The bumping process and the stacking process using the SBM and the fluxing underfill, respectively, for the TSV chips are carefully designed so that two-tier stacked TSV chips are sucessfully stacked.

• ETRI Journal
• /
• 제36권6호
• /
• pp.931-941
• /
• 2014

Many methodologies for clock mesh networks have been introduced for two-dimensional integrated circuit clock distribution networks, such as methods to reduce the total wirelength for power consumption and to reduce the clock skew variation through consideration of buffer placement and sizing. In this paper, we present a methodology for clock mesh to reduce both the clock skew and the total wirelength in three-dimensional integrated circuits. To reduce the total wirelength, we construct a smaller mesh size on a die where the clock source is not directly connected. We also insert through-silicon vias (TSVs) to distribute the clock signal using an effective clock TSV insertion algorithm, which can reduce the total wirelength on each die. The results of our proposed methods show that the total wirelength was reduced by 12.2%, the clock skew by 16.11%, and the clock skew variation by 11.74%, on average. These advantages are possible through increasing the buffer area by 2.49% on the benchmark circuits.

• 한국표면공학회지
• /
• 제56권3호
• /
• pp.180-184
• /
• 2023

Scholars have proposed wafer-level bonding and three-dimensional (3D) stacked integrated circuit (IC) and have investigated Cu-Cu bonding to overcome the limitation of Moore's law. However, information about quantitative Cu-Cu direct-bonding conditions, such as temperature, pressure, and interfacial adhesion energy, is scant. This study determines the optimal temperature and pressure for Cu-Cu bonding by varying the bonding temperature to 100, 150, 200, 250, and 350 ℃ and pressure to 2,303 and 3,087 N/cm². Various conditions and methods for surface treatment were performed to prevent oxidation of the surface of the sample and remove organic compounds in Cu direct bonding as variables of temperature and pressure. EDX experiments were conducted to confirm chemical information on the bonding characteristics between the substrate and Cu to confirm the bonding mechanism between the substrate and Cu. In addition, after the combination with the change of temperature and pressure variables, UTM measurement was performed to investigate the bond force between the substrate and Cu, and it was confirmed that the bond force increased proportionally as the temperature and pressure increased.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.1-10
• /
• 2009

작은 크기의 고기능성 휴대용 전자기기 수요의 급증에 따라 기존에 사용되던 수평구조의 2차원 칩의 크기를 줄이는 것은, 전기 배선의 신호지연 증가로 한계에 도달했다. 이러한 문제를 해결하기 위해 칩들을 수직으로 적층한 뒤, 수평 구조의 긴 신호배선을 짧은 수직 배선으로 만들어 신호지연을 최소화하는 3차원 칩 적층기술이 새롭게 제안되었다. 3차원 칩의 개발을 위해서는 기존에 사용되던 반도체 공정들뿐 아니라 실리콘 관통 전극 기술, 웨이퍼 박화 기술, 웨이퍼 정렬 및 본딩 기술 등의 새로운 공정들이 개발되어야 하며 위 기술들의 표준 공정을 개발하기 위한 노력이 현재 활발히 진행되고 있다. 현재까지 4~8개의 단일칩을 수직으로 적층한 DRAM/NAND 칩, 및 메모리 칩과 CPU 칩을 한꺼번에 적층한 구조의 성공적인 개발 결과가 보고되었다. 본 총설에서는 이러한 3차원 칩 적층의 기본 원리와 구조, 적층에 필요한 중요 기술들에 대한 소개, 개발 현황 및 앞으로 나아갈 방향에 대해 논의하고자 한다.

• Journal of Welding and Joining
• /
• 제30권3호
• /
• pp.26-31
• /
• 2012

Three-dimensional integrated circuit (3D IC) technology has become increasingly important due to the demand for high system performance and functionality. We have evaluated the effect of Buffered oxide etch (BOE) on the interfacial bonding strength of Cu-Cu pattern direct bonding. X-ray photoelectron spectroscopy (XPS) analysis of Cu surface revealed that Cu surface oxide layer was partially removed by BOE 2min. Two 8-inch Cu pattern wafers were bonded at $400^{\circ}C$ via the thermo-compression method. The interfacial adhesion energy of Cu-Cu bonding was quantitatively measured by the four-point bending method. After BOE 2min wet etching, the measured interfacial adhesion energies of pattern density for 0.06, 0.09, and 0.23 were $4.52J/m^2$, $5.06J/m^2$ and $3.42J/m^2$, respectively, which were lower than $5J/m^2$. Therefore, the effective removal of Cu surface oxide is critical to have reliable bonding quality of Cu pattern direct bonds.