• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.131-137
• /
• 2016

In this paper, we analyze the impedance analysis of vertical interconnection through-silicon vias (TSV) that is being studied for the purpose of improving the degree of integration and an electric feature in 3D IC. Also, it is to improve the performance and the degree of integration of the three-dimensional integrated circuit system which can exceed the limits of conventional two-dimensional a IC. In the future, TSV technology in full-chip 3-dimensional integrated circuit system design is very important, and a study on the electrical characteristics of the TSV for high-density and high-bandwidth system design is very important. Therefore, we study analyze the impedance influence of the TSV in accordance with the distance and frequency in a multiple TSV-to-TSV for the purpose of designing a full-chip three-dimensional IC. The results of this study also are applicable to semiconductor process tools and designed for the manufacture of a full-chip 3D IC.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.643-653
• /
• 2014

To reduce interconnect delay and power consumption while improving chip performance, a three-dimensional integrated circuit (3D IC) has been developed with die-stacking and through-silicon via (TSV) techniques. The power supply problem is one of the essential challenges in 3D IC design because IR-drop caused by insufficient supply voltage in a 3D chip reduces the chip performance. In particular, power bumps and TSVs are placed to minimize IR-drop in a 3D power delivery network. In this paper, we propose a design methodology for 3D power delivery networks to minimize the number of power bumps and TSVs with optimum mesh structure and distribute voltage variation more uniformly by shifting the locations of power bumps and TSVs while satisfying IR-drop constraint. Simulation results show that our method can reduce the voltage variation by 29.7% on average while reducing the number of power bumps and TSVs by 76.2% and 15.4%, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.99-104
• /
• 2013

As a demand for the portable device requiring smaller size and better performance is in hike, reducing the size of conventionally used planar 2 dimensional integration circuit(IC) cannot be a solution for the enhancement of the semiconductor integration circuit technology due to an increase in RC delay among interconnects. To address this problem, a new technology of 3 dimensional integration circuit (3D-IC) has been developing. In this study, three-dimensional integrated device was investigated due to improve of reducing the size, interconnection problem, high system performance and functionality.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.35-43
• /
• 2017

The three-dimensional integrated circuit (3D-IC) is a general trend for the miniaturized and high-performance electronic devices. The through-silicon-via (TSV) is the advanced interconnection method to achieve 3D integration, which uses vertical metal via through silicon substrate. However, the TSV based 3D-IC undergoes severe thermo-mechanical stress due to the CTE (coefficient of thermal expansion) mismatch between via and silicon. The thermo-mechanical stress induces mechanical failure on silicon and silicon-via interface, which reduces the device reliability. In this paper, the thermo-mechanical reliability of TSV based 3D-IC is reviewed in terms of mechanical fracture, heat conduction, and material characteristic. Furthermore, the state of the art via-level and package-level design techniques are introduced to improve the reliability of TSV based 3D-IC.

• Journal of information and communication convergence engineering
• /
• v.12 no.1
• /
• pp.46-52
• /
• 2014

This article presents key research needs in three-dimensional integrated circuit (3D IC) architectural floorplanning. Architectural floorplaning is done at a very early stage of 3D IC design process, where the goal is to quickly evaluate architectural designs described in register-transfer level (RTL) in terms of power, performance, and reliability. This evaluation is then fed back to architects for further improvement and/or modifications needed to meet the target constraints. We discuss the details of the following research needs in this article: block-level modeling, through-silicon-via (TSV) insertion and management, and chip/package co-evaluation. The goal of block-level modeling is to obtain physical, power, performance, and reliability information of architectural blocks. We then assemble the blocks into multiple tiers while connecting them using TSVs that are placed in between hard IPs and inside soft IPs. Once a full-stack 3D floorplanning is obtained, we evaluate it so that the feedback is provided back to architects.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.706-712
• /
• 2012

In previous work, novel maskless bumping and no-flow underfill technologies for three-dimensional (3D) integrated circuit (IC) integration were developed. The bumping material, solder bump maker (SBM) composed of resin and solder powder, is designed to form low-volume solder bumps on a through silicon via (TSV) chip for the 3D IC integration through the conventional reflow process. To obtain the optimized volume of solder bumps using the SBM, the effect of the volumetric mixing ratio of resin and solder powder is studied in this paper. A no-flow underfill material named "fluxing underfill" is proposed for a simplified stacking process for the 3D IC integration. It can remove the oxide layer on solder bumps like flux and play a role of an underfill after the stacking process. The bumping process and the stacking process using the SBM and the fluxing underfill, respectively, for the TSV chips are carefully designed so that two-tier stacked TSV chips are sucessfully stacked.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.931-941
• /
• 2014

Many methodologies for clock mesh networks have been introduced for two-dimensional integrated circuit clock distribution networks, such as methods to reduce the total wirelength for power consumption and to reduce the clock skew variation through consideration of buffer placement and sizing. In this paper, we present a methodology for clock mesh to reduce both the clock skew and the total wirelength in three-dimensional integrated circuits. To reduce the total wirelength, we construct a smaller mesh size on a die where the clock source is not directly connected. We also insert through-silicon vias (TSVs) to distribute the clock signal using an effective clock TSV insertion algorithm, which can reduce the total wirelength on each die. The results of our proposed methods show that the total wirelength was reduced by 12.2%, the clock skew by 16.11%, and the clock skew variation by 11.74%, on average. These advantages are possible through increasing the buffer area by 2.49% on the benchmark circuits.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.3
• /
• pp.180-184
• /
• 2023

Scholars have proposed wafer-level bonding and three-dimensional (3D) stacked integrated circuit (IC) and have investigated Cu-Cu bonding to overcome the limitation of Moore's law. However, information about quantitative Cu-Cu direct-bonding conditions, such as temperature, pressure, and interfacial adhesion energy, is scant. This study determines the optimal temperature and pressure for Cu-Cu bonding by varying the bonding temperature to 100, 150, 200, 250, and 350 ℃ and pressure to 2,303 and 3,087 N/cm². Various conditions and methods for surface treatment were performed to prevent oxidation of the surface of the sample and remove organic compounds in Cu direct bonding as variables of temperature and pressure. EDX experiments were conducted to confirm chemical information on the bonding characteristics between the substrate and Cu to confirm the bonding mechanism between the substrate and Cu. In addition, after the combination with the change of temperature and pressure variables, UTM measurement was performed to investigate the bond force between the substrate and Cu, and it was confirmed that the bond force increased proportionally as the temperature and pressure increased.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.1-10
• /
• 2009

As a demand for the portable device requiring smaller size and better performance is in hike, reducing the size of conventionally used planar 2 dimensional chip cannot be a solution for the enhancement of the semiconductor chip technology due to an increase in RC delay among interconnects. To address this problem, a new technology - "3 dimensional (3D) IC chip stack" - has been emerging. For the integration of the technology, several new key unit processes (e.g., silicon through via, wafer thinning and wafer alignment and bonding) should be developed and much effort is being made to achieve the goal. As a result of such efforts, 4 and 8 chip-stacked DRAM and NAND structures and a system stacking CPU and memory chips vertically were successfully developed. In this article, basic theory, configurations and key unit processes for the 3D IC chip integration, and a current tendency of the technology are explained. Future opportunities and directions are also discussed.

• Journal of Welding and Joining
• /
• v.30 no.3
• /
• pp.26-31
• /
• 2012

Three-dimensional integrated circuit (3D IC) technology has become increasingly important due to the demand for high system performance and functionality. We have evaluated the effect of Buffered oxide etch (BOE) on the interfacial bonding strength of Cu-Cu pattern direct bonding. X-ray photoelectron spectroscopy (XPS) analysis of Cu surface revealed that Cu surface oxide layer was partially removed by BOE 2min. Two 8-inch Cu pattern wafers were bonded at $400^{\circ}C$ via the thermo-compression method. The interfacial adhesion energy of Cu-Cu bonding was quantitatively measured by the four-point bending method. After BOE 2min wet etching, the measured interfacial adhesion energies of pattern density for 0.06, 0.09, and 0.23 were $4.52J/m^2$, $5.06J/m^2$ and $3.42J/m^2$, respectively, which were lower than $5J/m^2$. Therefore, the effective removal of Cu surface oxide is critical to have reliable bonding quality of Cu pattern direct bonds.