• 한국노년학
• /
• v.31 no.2
• /
• pp.303-315
• /
• 2011

The purpose of this study was to investigate effect of resistance training on BMD and bone metabolism related markers in aging rats. Thirty male Spraugue-Daweley rats were divided into sedentary (CON; n=10 ) non-load resistance trained(NLRTG; n=10), and load resistance trained(LRTG; n=10) groups at the age of 64 weeks. The rats in the resistance training groups((NLRTG and LRTG) performed the tower climbing exercise 4 times a week. The LRTG groups were conditioned to climb a vertical ladder with weights appended to their tail 4 days/wk for 12 wks. After 12 weeks of exercise, serum osteocalcin, bone mineral density (BMD), breaking force, ash, Ca, and P in the femur were measured. After training, serum osteocalcin (OC) was significantly (p < 0.05) higher in both LRTG and NLRTG when compared to Control. Right femur BMD was significantly (p < 0.05) greater for LRTG when compared to both NLRTG and Control with no significant difference between NLRTG and Conrtol. The breaking force of femur was significantly (p < 0.05) greater for LRTG and NLRTG when compared to Control. The Ash, Ca, content of femur were significantly increased in resistance training groups than control group. These results suggest that the increase in bone mineral density induced by resistance training is mediated by changes in bone microarchitecture as well as training intensity and osteocalcin.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.544-545
• /
• 2012

본 논문에서는 3상 4선식 UPS 인버터에 대한 저항성 수하 제어 방식 병렬운전 알고리즘을 제안하고, PSIM 시뮬레이션을 통해서 제안된 병렬운전 알고리즘과 강인 전압제어기를 적용한 2병렬 UPS 인버터의 운전 결과를 제시한다. 3상 UPS 인버터 2대로 병렬운전 환경을 구축하였고, 주파수-전압 강하 방식의 저항성 수하 제어를 이용하여 저항 부하, 유도성 부하, 비선형 부하에 대한 전력분담을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.542-543
• /
• 2012

본 논문에서는 저항성 수하제어 방식과 단일루프 강인 전압 제어기를 적용하여 단상 UPS 인버터의 비통신선 방식 5-병렬 운전 결과를 기술한다. 단일 루프 강인 전압 제어기를 이용해 단상 3kVA UPS 인버터 5대로 병렬운전 환경을 구축하였고, 저항성 주파수-전압 강하 방식의 수하 제어를 이용하여 저항 부하와 선형 부하에 대한 전력분담 특성을 PSIM 시뮬레이션을 통하여 확인하였다.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.464-469
• /
• 2011

Virus diseases often cause serious damage to rice production in Asia. The lack of information on virus resistance genes has been a major obstacle for the breeding of resistant varieties. In order to identify DNA marker associated with resistance against rice stripe virus (RSV), the quantitative trait locus (QTL) was carried out using advanced backcross population developed from a cross between RSV-resistant tongil type cultivar Shinkwang and susceptible japonica cultivar Ilpum. A RSV resistance QTL $qSTV11^{SG}$ explaining 44.2% of the phenotypic variation was identified on chromosome 11 of Tongil type rice cultivar 'Shingwang'. $qSTV11^{SG}$ was tightly linked to DNA marker RM6897. The RM6897 divided as resistance type allele and susceptible type alleles. Twenty seven resistant varieties showed the resistant-type allele and 23 susceptible varieties were susceptible-type allele to the marker of RM6897. This results and the molecular markers presented here may be useful in rice breeding for improving RSV resistance in japonica rice.

• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.282-287
• /
• 2011

Bacterial pustule (BP) is a leaf disease of soybean that is most common in Korea. Inoculation of 8ra, pathogen strain, to resistant and susceptible cultivars for finding the BP resistance gene (rxp) was much tried but the sequence of the exact gene is not found. This research performed in order to confirm the rxp gene near molecular marker by using the resistant and susceptible cultivars. Soybean BP resistance gene which related to region of near molecular marker could select the resistant cultivar. For the near molecular marker of rxp, reference genomics data available at sequenced Phytozome was used for designing molecular markers. The rxp was mapped between Satt372 and Satt486 on chromosome 17. According to previous study, rxp released in find mapping 7.2 Mbp to 7.3 Mbp on chromosome 17. In this study, we developed 3 random markers near from 6.6 Mbp to 7.3 Mbp on chromosome 17 identified to increase the genetic resolution of the rxp gene region using resistant and susceptible cultivars. Particularly, Rxp17-700 marker was mostly coincided resistance and susceptible genotype to rxp. This result suggests that Rxp17-700 marker will be more tightly linked to rxp gene.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1159-1164
• /
• 2006

Broadband antennas have late-time ringing by multi-reflections between feed points and 0pen ends of the antennas, which indicates the narrowband nature of the antenna. The resistive loading has been used to reduce the late time ringing that is important for ground penetrating radar and resonance detection systems in order to prevent masking of target. In this paper, we design an ultra wide band antenna with resistive loading technique to reduce the internal reflections within the antenna.. The designed antenna is implemented and tested to show inIproved characteristics.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.628-631
• /
• 2010

환경문제에 대한 관심으로 자동차에 대한 경량화가 요구되는 동시에 안전규제가 강화 되고 있어, 높은 인장강도를 가지는 고강도 강의 차체 적용 비율이 점차 증가하고 있다. 또한, 자동차 1대를 조립하기 위한 저항 점용접 횟수를 줄이고, 용접부에 충격안정성을 확보하기 위한 관심이 고조되고 있다. 따라서, 국내 자동차 산업에서 용접부의 신뢰성을 보장하기 다양한 비파괴 검사를 적용하고 있으며, 생산 공정에 적용하고 있다. 그중에서 용접 전극 사이에서 동저항(Dynamic resistance, 용접 공정중모재의 저항값의 변화)을 계측하여 용접성을 평가하는 방법이 제시되고, 차체 조립공정 중에 적용하려는 시도가 이루어지고 있다. 본 연구에서는 자동차 차체용 냉간 압연강판(590MPa dual-phase steel)을 인버터 DC 저항 점 용접하여, 용접전극 사이에서 동저항을 측정 하였다. 용접성은 인장전단 강도로 평가하였고, 용접 공정 변수는 용접 전류, 용접 시간, 가압력을 선정하였다. 동저항 그래프의 ${\alpha}$-peak와 ${\beta}$-peak값을 인장전단 강도에 따라 회귀 분석하여, 동저항에 따른 인장전단 강도를 예측하였다. 추가적으로, 용접부의 외관 형상 중에 압흔 깊이와 압흔자국 지름에 대한 회귀분석을 실시하였으며, 용접부 형상에 대한 신뢰성을 부여하였다.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.408-413
• /
• 2008

Rice blast resistance is considered one of the most important traits in rice breeding and the disease, caused by Magnaporthe grisea Barr, has brought significant crop losses annually. Moreover, breakdown of resistance normally occurs in two to five years after cultivar release, thus a more durable resistance is needed for better control of this disease. We developed a new variety, Keumo3, which showed strong resistance to leaf blast. It was tested in 2003 to 2007 at fourteen blast nursery sites covering entire rice-growing regions of South Korea. It showed resistance reactions in 12 regions and moderate in 2 regions without showing susceptible reactions. Durability test by sequential planting method indicated that this variety had better resistance. Results showed that Keumo3 was incompatible against 19 blast isolates with the exception of KI101 by artificial inoculation. To understand the genetic control of blast resistance in rice cultivar Keumo3 and facilitate its utilization, recombinant inbred lines (RIL) consisting of 290 F5 lines derived from Akidagomachi/Keumo3 were analyzed and genotyped with Pizt InDel marker zt56591. The recombination value between the marker allele of zt56591 and bioassay data of blast nursery test was 1.1%. These results indicated that MAS can be applied in selecting breeding populations for blast resistance using zt56591 as DNA marker.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.244-251
• /
• 2009

This study was carried out to identify useful single gene and gene combination resistant to K1, K2, K3 and 24 bacterial blight(BB) isolates (including K3a, HB01009) breaking down Xa3 gene. Xa3, Xa4, xa5 and Xa7 genes were resistant to K1, K2, K3 of bacterial blight pathogen. Against 24 BB isolates breaking down Xa3 gene, Xa1, Xa2, xa8, Xa10, Xa11, xa13 genes were susceptible, whereas Xa4 gene was moderately resistant and xa5 and Xa21 genes were resistant. IRBB7 having Xa7 gene showed resistance responding to 24 BB isolates, whereas IRBB107 carrying Xa7 gene was susceptible to 10 BB isolates and moderately resistant to 14 BB isolates. Near-isogenic lines (NILs) of Toyonishiki and IR24, both possessing Xa7 gene, showed different resistance response against 24 BB isolates according to genetic background. Xa3+xa5, Xa4+xa5, Xa4+xa13, Xa4+Xa21, xa5+xa13, xa5+Xa21, xa13+Xa21, Xa4+xa5+xa13, Xa4+xa5+Xa21, Xa4+xa13+Xa21, xa5+xa13+Xa21, and Xa4+xa5+xa13+Xa21 were resistant to K1, K2, K3 and 24 isolates breaking down Xa3 gene. When Xa3 and xa13 genes were combined with xa5, Xa4, Xa21, resistance response was enhanced compared with single gene lines containg only Xa3 or xa13. Similarly, when Xa4 gene was combined with xa5 and Xa21, resistance response was improved by the gene combination effect.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.8-15
• /
• 2003

In this paper, the issue of the differential ring oscillator in designing low phase noise is linearity improvement of delay cell's load resistor. A novel differential delay cell that improves on the Maneatis load is proposed. The linearity improvement of load resistor results in lower phase noise in ring oscillator. For comparison of the phase noise characteristics, Ali Hajimiri's phase noise model is used. In order to have a low ISF(impulse sensitivity function), it is important to have a symmetry between rise time and fall time of oscillation waveform. The ISF value of ing oscillator based on the proposed delay cell is lower than that of the existing ring oscillators. Due to this result, the phase noise is improved by 2~3dBc/Hz for the same power dissipation and oscillation frequency.