• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.355-362
• /
• 2013

A hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is described. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by FPGA-in-the-loop verification using MATLAB/Simulink, and synthesized with a TSMC 0.18-${\mu}m$ CMOS cell library. It has 16,000 gates and the estimated throughput is about 9.6 Gbps at 200Mhz@1.8V.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.279-282
• /
• 2012

In this paper, a hardware architecture of phase calculator for 3D image processing is proposed. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. Phase calculator designed in Verilog HDL is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.350-353
• /
• 2013

In this paper, a hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is proposed. The designed phase calculator, which adopts redundant binary number systems and a pipelined architecture to improve throughput and speed, performs arctangent operation using vectoring mode of DCORDIC algorithm. Fixed-point MATLAB simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification, and the estimated performance is about 7.5 Gbps at 469 MHz clock frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.643-650
• /
• 2014

A hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is described. The designed phase calculator adopts redundant binary number systems and a pipelined architecture to improve throughput and speed. It performs arctangent operation using vectoring mode of DCORDIC(Differential COordinate Rotation DIgital Computer) algorithm. Fixed-point MATLAB simulations are carried out to determine the optimal bit-widths and number of iteration. The phase calculator has ben verified by FPGA-in-the-loop verification using MATLAB/Simulink. A test chip has been fabricated using a TSMC $0.18-{\mu}m$ CMOS process, and test results show that the chip functions correctly. It has 82,000 gates and the estimated throughput is 400 MS/s at 400Mhz@1.8V.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2160-2163
• /
• 2003

본 논문에서는 FPGA를 기반으로 하는 DFT 연산알고리즘을 적용한 다채널 위상 및 HDR(Harmonic Distortion Ratio) 측정 시스템을 설계하였다. DFT 연산 알고리즘은 많은 연산량이 요구되는데, 기존에는 고가의 DSP 프로세서를 사용하여 소프트웨어적으로 처리하였지만, FPGA를 기반으로 하는 전용의 하드웨어로 구현할 경우 DSP의 연산량에 대한 부담을 감소시킬 수 있다. DFT 연산 알고리즘은 전용 ASIC으로 구현 시 경제성을 고려하기 위해서 곱셈기 공유 구조를 적용하고, 효과적인 시스템 Integration울 위해서 범용인터페이스 방식을 채택하고 이렇게 설계한 시스템을 실제 다채널 톤 신호를 입력으로 하는 동작 시험을 통하여 검증하였다.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.95-97
• /
• 2000

배열 안테나에서 안테나 소자의 개수의 증가는 안테나의 이득을 증가시킬 수 있으므로 열악한 채널 환경에서도 채널이 필요로 하는 링크 마진을 얻을 수 있다. 그러나, 기존 빔 형성기에서 사용되는 배열 안테나 기법은 많은 계산량과 소모 메모리량 때문에 배열 소자의 개수에 제한이 따르게 된다. 이러한 문제를 해결하기 위하여 본 논문에서는 배열 안테나의 구조에 따른 위상차이를 보상하여 적은 계산량과 메모리를 갖는 배열 위상 차이 보상을 이용한 평행 구조 빔 형성기를 제안한다 배열 위상 차이를 보상하는 기법으로 적은 계산량과 메모리로 개수가 많은 긴 배열 안테나에서 얻을 수 있는 분해능과 안테나 이득을 얻을 수 있다. 제안된 기법의 성능을 비교하기 위해 기존의 빔 형성기법으로delay-sum 빔 형성기와 공분산 행렬의 고유치 해석을 통한 고유벡터 기법의 빔 스펙트럼과 연산량을 비교하였다. 제안된 기법으로 빔 형성을 하면, 배열 안테나의 소자의 개수가 늘어나도 기존의 방법보다 최소 30%의 연산량으로 스펙트럼 상 비슷한 성능을 얻을 수 있다.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.436-438
• /
• 2005

본 논문에서는 전력선 위상 측정을 위해 A/D 변환기 및 위상계측 연산장치를 집적한 하이브리드 센서칩의 구현 기법을 제시하였다. 개발한 위상계측 연산장치는 recursive sliding-DFT에 기반하였으며 곱셈기의 시분할 공유 구조를 사용하여 칩의 구현 면적을 최소화 하였다. 60Hz의 전력선 신호를 중심주파수로 하는 AD 변환장치는 sigma-delta ADC를 기반으로 하여 8-bit 정밀도를 제공하며 아날로그부의 구현을 최소화하도륵 설계하였다. 설계한 하이브리드 센서칩은 컴퓨터 시뮬레이션 및 FPGA 구현을 통해 동작을 검증하였으며, 검증 완료후 $0.35{\mu}m$ CMOS 공정기술로 구현하였다. 전력선 위상을 측정하기 위해 구현된 4채널 하이브리드 센서 칩의 설계면적은 $5{\times}5m^2$ 의 약 20%정도를 차지하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.25-29
• /
• 1984

The active compensation of operational amplifeir is that it compensates the phase shift and the attennation of gain of OP Amp, according as the frequency increases. The compensation circuit is applied to VCVS and interting integrator. For VCVS, the phase shift of proposed compensated circuit is not concern with the frequency and the gain chracteristic is better than the proposde circuit by Soliman, according as the rate of feedback resistors of compensated circuit changes. Voltage follower accomplishies compgnsation using the same circuit. Also, the compensation circuit to increase O-ffactor in inverting integrator is proposed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.81-86
• /
• 2010

Since CORDIC (COordinate Rotation DIgital Computer) is able to carry out the phase operation, such as vector to phase conversion or rotation of vectors, with adders and shifters, it is well suited for the design of the frequency synchronization unit in OFDM receivers. It is not easy, however, to fully utilize the CORDIC in the OFDM demodulator because of the non-linear characteristics of the direction sequence (DS), which is the representation of the phase in CORDIC. In this paper a new representation method is proposed to linearize the direction sequence approximately. The maximum phase error of the linearized binary direction sequence (LBDS) is also discussed. For the purpose of designing the hardware, the architectures for the binary DS (BDS) to LBDS converter and the LBDS to BDS inverse converter are illustrated. Adopting LBDS, the overall frequency synchronization hardware for OFDM receivers can be implemented fully utilizing CORDIC and general arithmetic operators, such as adders and multipliers, for the phase estimation, loop filtering of the frequency offset, derotation for the frequency offset correction. An example of the design of 22 bit LBDS for the T-DMB demodulator is also presented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.24-32
• /
• 2017

In this paper, a low power 4th order delta-sigma modulator was designed with a high resolution of 12 bits or more for the biological signal processing. Using time-interleaving technique, 4th order delta-sigma modulator was designed with one operational amplifier. So power consumption can be reduced to 1/4 than a conventional structure. To operate stably in the big difference between the two capacitor for kT/C noise and chip size, the variable-stage amplifier was designed. In the first phase and second phase, the operational amplifier is operating in a 2-stage. In the third and fourth phase, the operational amplifier is operating in a 1-stage. This was significantly improved the stability of the modulator because the phase margin exists within 60~90deg. The proposed delta-sigma modulator is designed in a standard $0.18{\mu}m$ CMOS n-well 1 poly 6 Metal technology and dissipates the power of $354{\mu}W$ with supply voltage of 1.8V. The ENOB of 11.8bit and SNDR of 72.8dB at 250Hz input frequency and 256kHz sampling frequency. From measurement results FOM1 is calculated to 49.6pJ/step and FOM2 is calculated to 154.5dB.