• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.543-550
• /
• 1998

A process for the preparation of spherical tungsten oxide powders by the emulsion evaporation method was developed. The characteristics of the powders thus prepared were examined by means of TGA X-ray diffraction SEM and image analysis. The emulsion was prepared by fast mixing of tungsten containing aque-ous phase and the organic phase which contained kerosene surfactant and paraffin oil. The precursor was made by evaporating the emulsion in the kerosene bath at $160^{\circ}C$ and then calcined at $650^{\circ}C$ in order to pro-duce tungsten oxide powders. The average particle size of the tungsten oxide powders was $0.5\;\mu\textrm{m}$ and their shapes were spherical. Water-in-oil type emulsion wasmore advantageous to make less agglmerated. $W_{3}$ powders than the oil-in-water type emulsion for the emulsion evaporation experiments. As the HLB value of the surfactant increased and the concentration of tungsten ions in the aqueous phase decreased the mean particle size of tungsten oxide powders decreased whereas agglomeration increased. The optimum con-centration of Span 80 was 8 percent by volume and the optimum stirring speed in the emulsion formation was 5000 rpm in order to obtain find less agglomerated $W_{3}$ powders.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.196.2-196.2
• /
• 2015

There are various issues fabricating the successful and efficient solar cell structures. One of the most important issues is band alignment technique. The solar cells make the carrier in their active region over the p-n junction. Then, electrons and holes diffuse by minority carrier diffusion length. After they reach the edge of solar cells, there exist large energy barrier unless the good electrode are chosen. Many various conductor with different work functions can be selected to solve this energy barrier problem to efficiently extract carriers. Tungsten oxide has large band gap known as approximately 3.4 eV, and usually this material shows n-type property with reported work function of 6.65 eV. They are extremely high work function and trap level by oxygen vacancy cause them to become the hole extraction layer for optical devices like solar cells. In this study, we deposited tungsten oxide thin films by sputtering technique with various sputtering conditions. Their electrical contact properties were characterized with transmission line model pattern. The structure of tungsten oxide thin films were measured by x-ray diffraction. With x-ray photoelectron spectroscopy, the content of oxygen was investigated, and their defect states were examined by spectroscopic ellipsometry, UV-Vis spectrophotometer, and photoluminescence measurements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.129-132
• /
• 1998

In this paper, we have studied the effect of electron reflection on shadow mask on which tungsten oxide film is coated and have studied the variation of beam mislanding with coating thickness in CRT. We found the method to be able to control coating thicknessed and optimum coating thickness of tungsten oxide film was 1∼2$\mu\textrm{m}$. Mislanding of electron beam was reduced about 20∼48% with increasing coating thickness in CRT

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.85-91
• /
• 1998

The electrochromic behaviors of de-magnetron sputtered tungsten oxide thin films were investigated during coloration and bleach cycles using in situ real-time spectroscopic ellipsometry. Effective medium approximation and least-squares regression analyses were employed to investigate the electrochromic process. The optical properties of the tungsten oxide film were analyzed using the oscillator model and the evolution of the process using a reaction-limited model. In these analyses, we found that two different reaction rates were associated with the process. We ascribe this behavior to the microstructure of this films.

• Solar Energy
• /
• v.16 no.2
• /
• pp.87-96
• /
• 1996

Electochromic tungsten oxide thin films were prepared on the ITO coated glass by rf magnetron sputtering from a compressed powder tungsten oxide target in an argonoxygen atmosphere. The influence of the preparation conditions, especially the substrate temperature, on the chemical stability of film was investigated. These films were cycled in 0.6M $LiClO_4$ and 0.6M $H_2SO_4$ electrolyte respecitively, and exhibited electrochromic behavior upon the electrochemical insertion and extraction of ion. Among these tungsten oxide thin films, films prepared at a substrate temperature of $150^{\circ}C$ were found to be most stable in terms of cyclic durability.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.91.2-91.2
• /
• 2007

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.129-136
• /
• 2021

Radiation shields used in medical institutions mainly use lead to manufacture products and fitments. Although lead has excellent processability and economic efficiency, its use is being reduced due to environmental issues when it is disposed of. In addition, when used for a long time, there is a limit to using it as a shielding film, shielding wall, medical device parts, etc. due to cracking and sagging due to gravity. To solve this problem, copper, tin, etc. are used, but tungsten is mostly used because there is a difficulty in the manufacturing process to control the shielding performance. However, it is difficult to compare with other shielding materials because the characteristics according to the type of tungsten are not well presented. Therefore, in this study, a medical radiation shielding sheet was manufactured in the same process using pure tungsten, tungsten carbide, and tungsten oxide, and the particle composition and shielding performance of the sheet cross-section were compared.As a result of comparison, it was found that the shielding performance was excellent in the order of pure tungsten, tungsten carbide, and tungsten oxide.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.7-11
• /
• 2018

In this study, we synthesize tungsten oxide thin films by electrodeposition and characterize their electrochromic properties. Depending on the deposition modes, compact and porous tungsten oxide films are fabricated on a transparent indium tin oxide (ITO) substrate. The morphology and crystal structure of the electrodeposited tungsten oxide thin films are investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). X-ray photoelectron spectroscopy is employed to verify the chemical composition and the oxidation state of the films. Compared to the compact tungsten oxides, the porous films show superior electrochemical activities with higher reversibility during electrochemical reactions. Furthermore, they exhibit very high color contrast (97.0%) and switching speed (3.1 and 3.2 s). The outstanding electrochromic performances of the porous tungsten oxide thin films are mainly attributed to the porous structure, which facilitates ion intercalation/deintercalation during electrochemical reactions.

• Journal of Powder Materials
• /
• v.26 no.3
• /
• pp.201-207
• /
• 2019

Tungsten heavy alloys (W-Ni-Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

• Journal of Powder Materials
• /
• v.9 no.2
• /
• pp.89-95
• /
• 2002

Spherical fine powders of tungsten oxide powders were prepared by the emulsion evaporation method. The characteristics of the powders prepared were examined by means of TGA, X-ray diffraction, SEM and image analysis. The emulsions were prepared by fast mixing of aqueous phase containing tugsten and the organic phase which composed of kerosene, surfactant, and paraffin oil. Precursors were made by evaporating the emulsionin the kerosene bath at $160^{\circ}C$, and then calcined at $650^{\circ}C$ in order to produce tungsten oxide powders. The average particle size of the tungsten oxide powders was $0.5\mutextrm{m}$ and their shapes were spherical at the both case of w/o and o/w type emulsions. As the HLB value of the surfactant increased and the concentration of tungsten ions decreased the mean particle siqe of tungsten oxide powders decreased whereas agglomerationsize increased. The optimum concentration of Span 80 was 8 percent by volume, and the optimum stirring speed in the emulsion formation was 5000 rpm in order to obtain fine and well dispersed $WO_3$ powders.