• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.4
• /
• pp.145-151
• /
• 2005

The synthetic breaking test method was developed to evaluate the breaking performance of ultra high-voltage circuit breaker and made up of two independent circuits; current source circuit and voltage source circuit. In application of this test method, it is necessary to extend the arc of the test breaker. So, the new re-ignition system using VTGS (Vacuum Triggered Gap-Switch) was constructed to improve the efficiency and reliability of this test. In this re-ignition system, VTGS operates in high vacuum state of $5{\time}10^{17}$torr and control system consists of the triggering device and the air M-G (Motor-Generator). This re-ignition system showed the operating characteristics, such as delay time ($t_d$) and jitter time ($t_j$ not exceeding 5us and 1us respectively, and had the operating voltage of $25\~150kVdc$ at the gap distance of 24mm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.25-33
• /
• 2021

This paper presents the development process for airbag safety devices fitted in motorcyclists' garments. Motorcycle riders often sustain multiple injuries in crashes since rider post-impact kinematics depend on several variables. This study proposes a newly inflatable safety system connected to the motorcycle by a cable. An airbag device with a mechanical triggering system is deployed when the cable detaches from its mounting clip. Airbag filling tests are performed to determine the mixing ratio of compressed gases with the severance of temperature. To estimate the airbag effectiveness to reduce riders' injuries, numerical analysis is performed using the finite element method. A comparative analysis (i.e., with and without the chosen device) was conducted to evaluate its protective efficacy. Prototype garments based on the proposed design have been created and have undergone sled tests. The proposed safety device could also be beneficial in accidents during other sports activities.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.589-590
• /
• 2006

A novel Triple-Well P-type Triggered Silicon Controlled Rectifier (TWPTSCR) for on-chip ESD protection implemented with a triple-well CMOS technology is presented. Unlike conventional SCR devices, the proposed TWPTSCR offers a reduced triggering voltage level as well as the enhanced ESD performance of the SCR devices. From the experimental results, the TWPTSCR with a device width of 20um has the triggering voltage of 1.1V.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.587-588
• /
• 2006

This paper presents the new structural zener triggered silicon-controlled rectifier (ZTSCR) electrostatic discharge (ESD) protection circuit. The proposed ESD protection circuit has lower triggering voltage than conventional circuits. The proposed ZTSCR has the triggering voltage of 4V. In the ESD event, this proposed novel ZTSCR ESD protection device could trigger quickly and provide an effective discharging path.

• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.36-47
• /
• 1996

By integrating the eye head-position monitioring devices, the present authors developed an eye-controlled human/computer interface based on the line-of-sight and an intentional blink to invoke commands. Also modified was an existing calibration method to reduce the visual angle between the target center and the intersection point of the derived line-of-sight. This modified calibration method allowed 108 or more command blocks to be displayed on the 14 inch monitor with the target acquisition probability(hit rate) of 98% when viewed at the distance of 500 mm apart. An active triggering method using an intentional blink was proposed and was shown to be a feasible and efficient alternative to invoke commands with total triggering time of 0.8 sec or less. The system could be used by the normal people as well as the handicapped individuals as a new human/computer interface.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.755-759
• /
• 2014

We propose an integrate-and-fire neuron circuit and synaptic devices with the floating body MOSFETs. The synaptic devices consist of a floating body MOSFET to imitate biological synaptic characteristics. The synaptic learning is performed by hole accumulation. The synaptic device has short-term and long-term memory in a single silicon device. I&F neuron circuit emulate the biological neuron characteristics such as integration, threshold triggering, output generation, and refractory period, using floating body MOSFET. The neuron circuit sends feedback signal to the synaptic transistor for long-term memory.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.658-663
• /
• 2015

In the previous work, we have proposed an integrate-and-fire neuron circuit and synaptic device based on the floating body MOSFET [1-3]. Integrate-and-Fire(I&F) neuron circuit emulates the biological neuron characteristics such as integration, threshold triggering, output generation, refractory period using floating body MOSFET. The synaptic device has short-term and long-term memory in a single silicon device. In this paper, we connect the neuron circuit and the synaptic device using current mirror circuit for summation of post synaptic pulses. We emulate spike-timing-dependent-plasticity (STDP) characteristics of the synapse using feedback voltage without controller or clock. Using memory device in the logic circuit, we can emulate biological synapse and neuron with a small number of devices.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1118-1119
• /
• 2017

머신 비전 시스템은 영상 처리와 영상 분석을 함께 사용하여 공장의 조립라인 등 다양한 분야에서 응용 되고 있는 시스템이다. 하지만 기존의 시스템은 고가의 초고속 카메라와 다양한 센서를 동시에 이용하는 문제로 시스템 구축 및 확장성 등의 불편함을 야기하고 있다. 이에 본 연구에서는 초고속 실시간 트리거를 이용한 저가형 이미지 센서 기반의 머신 비전 시스템을 구성하고자 한다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.202-207
• /
• 2008

This study provides review and improvement plans for the possible problems caused when the CV cable is used as a positive feeder line which supplies power from the DC HSCB (high-speed circuit breaker) to the catenariesin Seoul Metro which is using direct-current feeder method. In detail, this study contributes to stabilizing the power line by triggering a protective device by instantly detecting potential rise which happens when grounding fault occurs in non-grounding type CV cable shield.