• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.190-192
• /
• 2006

The 3-dimensional(3D) chip stacking technology is one of the leading technologies to realize a high density and high performance system in package(SIP). It could be found that it is the advanced process of through-hole via formation with the minimum damaged on the Si-wafer. Laser ablation is very effective method to penetrate through hole on the Si-wafer because it has the advantage that formed under $100{\mu}m$ diameter through-hole via without using a mask. In this paper, we studied the optimum method for a formation of through-hole via using femto-second laser heat sources. Furthermore, the processing parameters of the specimens were several conditions such as power of output, pulse repetition rate as well as irradiation method and time. And also the through-hole via form could be investigated and analyzed by microscope and analyzer.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.595-596
• /
• 2006

A novel Si via structure is suggested and fabricated for 3D MEMS package using the doped silicon as an interconnection material. Oxide isolations which define Si via are formed simultaneously when fabricating the MEMS structure by using DRIE and oxidation. Silicon Direct Bonding Multi-stacking process is used for stacked package, which consists of a substrate, MEMS structure layer and a cover layer. The bonded wafers are thinned by lapping and polishing. A via with the size of $20{\mu}m$ is fabricated and the electrical and mechanical characteristics of via are under testing.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.69-73
• /
• 2010

Finite-element analyses were conducted to investigate the thermal stress in 3-dimensional stacked wafers package containing through-silicon-via (TSV), which is being widely used for 3-Dimensional integration. With finite element method (FEM), thermal stress was analyzed with the variation of TSV diameter, bonding diameter, pitch and TSV height. It was revealed that the maximum von Mises stresses occurred at the edge of top interface between Cu TSV and Si and the Si to Si bonding site. As TSV diameter increased, the von Mises stress at the edge of TSV increased. As bonding diameter increased, the von Mises stress at Si to Si bonding site increased. As pitch increased, the von Mises stress at Si to Si bonding site increased. The TSV height did not affect the von Mises stress. Therefore, it is expected that smaller Cu TSV diameter and pitch will ensure mechanical reliability because of the smaller chance of plastic deformation and crack initiation.

• Korean Journal of Metals and Materials
• /
• v.49 no.5
• /
• pp.388-394
• /
• 2011

High speed copper filling into TSV (through-silicon-via) for three dimensional stacking of Si chips was investigated. For this study, a tapered via was prepared on a Si wafer by the DRIE (deep reactive ion etching) process. The via had a diameter of 37${\mu}m$ at the via opening, and 32${\mu}m$ at the via bottom, respectively and a depth of 70${\mu}m$. $SiO_2$, Ti, and Au layers were coated as functional layers on the via wall. In order to increase the filling ratio of Cu into the via, a PPR (periodic pulse reverse) wave current was applied to the Si chip during electroplating, and a PR (pulse reverse) wave current was applied for comparison. After Cu filling, the cross sections of the vias was observed by FE-SEM (field emission scanning electron microscopy). The experimental results show that the tapered via was filled to 100% at -5.85 mA/$cm^2$ for 60 min of plating by PPR wave current. The filling ratio into the tapered via by the PPR current was 2.5 times higher than that of a straight via by PR current. The tapered via by the PPR electroplating process was confirmed to be effective to fill the TSV in a short time.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.3
• /
• pp.114-121
• /
• 2003

Through comparing stress state of TEOS and SiLK-embedded structures, the effect of low-k materials on stress and stress distribution in via-line structures were investigated using three-dimensional finite element analyses. In the case of TEOS-embedded via-line structures, hydrostatic stress was concentrated at the via and the top of the lines, where the void was suspected to nucleate. On the other hand, in the via-line structures integrated with SiLK, large von-Mises stress is maintained at the via, thus deformation of via is expected as the main failure mode. A good correlation between the calculated results and experimentally observed failure modes according to dielectric materials was obtained.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.49-53
• /
• 2011

High-speed Cu filling into a through-silicon-via (TSV) and simplification of bumping process by electroplating for three dimensional stacking of Si dice were investigated. The TSV was prepared on a Si wafer by deep reactive ion etching, and $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to increase the filling rate of Cu into the via, a periodic-pulse-reverse wave current was applied to the Si chip during electroplating. In the bumping process, Sn-3.5Ag bumping was performed on the Cu plugs without lithography process. After electroplating, the cross sections of the vias and appearance of the bumps were observed by using a field emission scanning electron microscope. As a result, voids in the Cu-plugs were produced by via blocking around via opening and at the middle of the via when the vias were plated for 60 min at -9.66 $mA/cm^2$ and -7.71 $mA/cm^2$, respectively. The Cu plug with a void or a defect led to the production of imperfect Sn-Ag bump which was formed on the Cu-plug.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.68-73
• /
• 2014

Among through silicon via (TSV) technologies, for replacing Cu filling method, the method of molten solder filling has been proposed to reduce filling cost and filling time. However, because Sn alloy which has a high coefficient of thermal expansion (CTE) than Cu, CTE mismatch between Si and molten solder induced higher thermal stress than Cu filling method. This thermal stress can deteriorate reliability of TSV by forming defects like void, crack and so on. Therefore, we fabricated SiC composite filling material which had a low CTE for reducing thermal stress in TSV. To add SiC nano particles to molten solder, ball-typed SiC clusters, which were formed with Sn powders and SiC nano particles by ball mill process, put into molten Sn and then, nano particle-dispersed SiC composite filling material was produced. In the case of 1 wt.% of SiC particle, the CTE showed a lowest value which was a $14.8ppm/^{\circ}C$ and this value was lower than CTE of Cu. Up to 1 wt.% of SiC particle, Young's modulus increased as wt.% of SiC particle increased. And also, we observed cross-sectioned TSV which was filled with 1 wt.% of SiC particle and we confirmed a possibility of SiC composite material as a TSV filling material.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.19-24
• /
• 2009

Formation of an adhesion/barrier layer and a seed layer by sputtering techniques followed by electroplating has been one of the most widely used methods for the filling of through-Si via (TSV) with high aspect ratio for 3-D packaging. In this research, the adhesion and diffusion-barrier properties of the $TaN_x$ film deposited by reactive sputtering were investigated. The adhesion strength between Cu film and $SiO_2$/Si substrate was quantitatively measured by $180^{\circ}$ peel test and topple test as a function of the composition of the adhesive $TaN_x$ film. As the nitrogen content increased in the adhesive $TaN_x$ film, the adhesion strength between Cu and $SiO_2$/Si substrate increased, which was attributed to the increased formation of interfacial compound layer with the nitrogen flow rate. We also examined the diffusion-barrier properties of the $TaN_x$ films against Cu diffusion and found that it was improved with increasing nitrogen content in the $TaN_x$ film up to N/Ta ratio of 1.4.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.11-18
• /
• 2014

TSV(through silicon via) filling technology is making a hole in Si wafer and electrically connecting technique between front and back of Si die by filling with conductive metal. This technology allows that a three-dimensionally connected Si die can make without a large number of wire-bonding. These TSV technologies require various engineering skills such as forming a via hole, forming a functional thin film, filling a conductive metal, polishing a wafer, chip stacking and TSV reliability analysis. This paper addresses the TSV filling using Cu electrodeposition. The impact of plating conditions with additives and current density on electrodeposition will be considered. There are additives such as accelerator, inhibitor, leveler, etc. suitably controlling the amount of the additive is important. Also, in order to fill conductive material in whole TSV hole, current wave forms such as PR(pulse reverse), PPR(periodic pulse reverse) are used. This study about semiconductor packaging will be able to contribute to the commercialization of 3D TSV technology.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.18-18
• /
• 2008

3차원 패키징 System In Package (SIP)구조에서 Chip to Chip 단위 Interconnection 역할을 하는 Through Silicon Via(TSV)를 형성하기 위하여 Pulsating RF bias가 장착된 Inductively Coupled Plasma Etcher 장비를 이용하였다. 이 Pulsating 플라즈마 공정 방법은 주기적인 펄스($50{\sim}500Hz$)와 듀티($20{\sim}99%$) cycle 조절이 가능하며, 플라즈마 에칭특성에 영향을 주는 플라즈마즈마 발생 On/Off타임을 조절할 수 있다. 예를 들면, 플라즈마 발생 Off일 경우에는 이온(SFx+, O+)과 래디컬(SF*, F*, O*)의 농도 및 활성도를 급격하게 줄이는 효과를 얻을 수가 있는데, 이러한 효과는 식각 에칭시, 이온폭격의 손상을 급격하게 줄일 수 있으며, 실리콘 표면과 래디컬의 화학적 반응을 조절하여 에칭 측벽 식각 보호막 (SiOxFy : Silicon- Oxy- Fluoride)을 형성하는데 영향을 미친다. 그리고, TSV 형성에 있어서 큰 문제점으로 지적되고 있는 언더컷과 수평에칭 (Horizontal etching)을 개선하기 위한 방법으로, Black-Siphenomenon을 이번 실험에 적용하였다. 이 Black-Si phenomenon은 Bare Si샘플을 이용하여, 언더컷(Undercut) 및 수평 에칭 (Horizontal etching)이 최소화 되는 공정 조건을 간편하게 평가 할 수 있는 방법으로써, 에칭 조건 및 비율을 최적화하는 데 효율적이었다. 결과적으로, Pulsating RF bias가 장착된 Inductively Coupled Plasma Etcher 장비를 이용한 에칭실험은 펄스 주파수($50{\sim}500Hz$)와 듀티($20{\sim}99%$) cycle 조절이 가능하여, 이온(SFx+, O+)과 래디컬(SF*, F*, O*)의 농도와 활성화를 조절 하는데 효과적이었으며, Through Silicon Via (TSV)를 형성 하는데 있어서 Black-Si phenomenon 적용은 기존의 Continuous 플라즈마 식각 결과보다 향상된 에칭 조건 및 에칭 프로파일 결과를 얻는데 효과적이었다.