• 제목/요약/키워드: thin film transistors (TFTs)

검색결과 384건 처리시간 0.03초

Polymide와 Polyacryl을 게이트 절연층으로 이용한 pentacene TFT의 제작과 전기적 특성에 관한 연구 (The Fabrication and Electrical Characteristics of Pentacene TFT using Polyimide and Polyacryl as a Gate Dielectric Layer)

  • 김윤명;김옥병;김영관;김정수
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권4호
    • /
    • pp.161-168
    • /
    • 2001
  • Organic thin film transitors(TFTs) are of interest for use in broad area electronic applications. For example, in active matrix liquid crystal displays(AMLCDs), organic TFTs would allow the use of inexpensive, light-weight, flexible, and mechanically rugged plastic substrates as an alternative to the glass substrates needed for commonly used hydrogenated amorphous silicon(a-Si:H). Recently pentacene TFTs with carrier field effect, mobility as large as 2 $cm^2V^{-1}s^{-1}$ have been reported for TFTs fabricated on silicon substrates, and it is higher than that of a-Si:H. But these TFTs are fabricated on silicon wafer and $SiO_2$ was used as a gate insulator. $SiO_2$ deposition process requires a high insulator which is polyimide and photo acryl. We investigated trasfer and output characteristics of the thin film transistors having active layer of pentacene. We calculated field effect mobility and on/off ratio from transfer characteristics of pentacene thin film transistor, and measured IR absorption spectrum of polymide used as the gate dielectric layer. It was found that using the photo acryl as a gate insulator, threshold voltage decreased from -12.5 V to -7 V, field effect mobility increased from 0.012 $cm^2V^{-1}s^{-1}$ to 0.039 $cm^2V^{-1}s^{-1}$ , and on/off current ratio increased from $10^5\;to\;10^6$. It seems that TFTs using photo acryl gate insulator is apt to form channel than TFTs using polyimide gate insulator.

  • PDF

Manufacture and characteristic evaluation of Amorphous Indium-Gallium-Zinc-Oxide (IGZO) Thin Film Transistors

  • 성상윤;한언빈;김세윤;조광민;김정주;이준형;허영우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.166-166
    • /
    • 2010
  • Recently, TFTs based on amorphous oxide semiconductors (AOSs) such as ZnO, InZnO, ZnSnO, GaZnO, TiOx, InGaZnO(IGZO), SnGaZnO, etc. have been attracting a grate deal of attention as potential alternatives to existing TFT technology to meet emerging technological demands where Si-based or organic electronics cannot provide a solution. Since, in 2003, Masuda et al. and Nomura et al. have reported on transparent TFTs using ZnO and IGZO as active layers, respectively, much efforts have been devoted to develop oxide TFTs using aforementioned amorphous oxide semiconductors as their active layers. In this thesis, I report on the performance of thin-film transistors using amorphous indium gallium zinc oxides for an active channel layer at room temperature. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium gallium zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium gallium zinc oxide was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 1.5V and an on/off ration of > $10^9$ operated as an n-type enhancement mode with saturation mobility with $9.06\;cm^2/V{\cdot}s$. The devices show optical transmittance above 80% in the visible range. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium gallium zinc oxides for an active channel layer were reported. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

  • PDF

산소 분압에 따른 산화주석 박막의 전계효과 이동도 변화 분석 (Analysis on the Field Effect Mobility Variation of Tin Oxide Thin Films with Oxygen Partial Pressure)

  • 마대영
    • 한국전기전자재료학회논문지
    • /
    • 제27권6호
    • /
    • pp.350-355
    • /
    • 2014
  • Bottom-gate tin oxide ($SnO_2$) thin film transistors (TFTs) were fabricated on $N^+$ Si wafers used as gate electrodes. 60-nm-thick $SnO_2$ thin films acting as active layers were sputtered on $SiO_2/Al_2O_3$ films. The $SiO_2/Al_2O_3$ films deposited on the Si wafers were employed for gate dielectrics. In order to increase the resistivity of the $SnO_2$ thin films, oxygen mixed with argon was introduced into the chamber during the sputtering. The mobility of $SnO_2$ TFTs was measured as a function of the flow ratio of oxygen to argon ($O_2/Ar$). The mobility variation with $O_2/Ar$ was analyzed through studies on crystallinity, oxygen binding state, optical properties. X-ray diffraction (XRD) and XPS (X-ray photoelectron spectroscopy) were carried out to observe the crystallinity and oxygen binding state of $SnO_2$ films. The mobility decreased with increasing $O_2/Ar$. It was found that the decrease of the mobility is mainly due to the decrease in the polarizability of $SnO_2$ films.

Light and bias stability of c-IGO TFTs fabricated by rf magnetron sputtering

  • Jo, Kwang-Min;Lee, Joon-Hyung;Kim, Jeong-Joo;Heo, Young-Woo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.265.2-265.2
    • /
    • 2016
  • Oxide thin film transistors (TFTs) have attracted considerable interest for gate diver and pixel switching devices of the active matrix (AM) liquid crystal display (LCD) and organic light emitting diode (OLED) display because of their high field effect mobility, transparency in visible light region, and low temperature processing below $300^{\circ}C$. Recently, oxide TFTs with polycrystalline In-Ga-O(IGO) channel layer reported by Ebata. et. al. showed a amazing field effect mobility of $39.1cm^2/Vs$. The reason having high field effect mobility of IGO TFTs is because $In_2O_3$ has a bixbyite structure in which linear chains of edge sharing InO6 octahedral are isotropic. In this work, we investigated the characteristics and the effects of oxygen partial pressure significantly changed the IGO thin-films and IGO TFTs transfer characteristics. IGO thin-film were fabricated by rf-magnetron sputtering with different oxygen partial pressure ($O_2/(Ar+O_2)$, $Po_2$)ratios. IGO thin film Varies depending on the oxygen partial pressure of 0.1%, 1%, 3%, 5%, 10% have been some significant changes in the electrical characteristics. Also the IGO TFTs VTH value conspicuously shifted in the positive direction, from -8 to 11V as the $Po_2$ increased from 1% to 10%. At $Po_2$ was 5%, IGO TFTs showed a high drain current on/off ratio of ${\sim}10^8$, a field-effect mobility of $84cm^2/Vs$, a threshold voltage of 1.5V, and a subthreshold slpe(SS) of 0.2V/decade from log(IDS) vs VGS.

  • PDF

열처리를 통한 HgSe 나노입자 기반 박막 트랜지스터의 전기적 특성 향상 (Improved Electrical Characteristics of HgSe Nanoparticle-based Thin Film Transistors by Thermal Annealing)

  • 윤정권;조경아;김상식
    • 전기전자학회논문지
    • /
    • 제14권3호
    • /
    • pp.219-223
    • /
    • 2010
  • 본 연구에서는, PVA를 게이트 유전체로 이용하여 백 게이트 (back-gate) 구조의 HgSe 나노입자 박막트랜지스터를 플라스틱 기판위에 제작하였다. 제작된 박막트랜지스터는 $100^{\circ}C$ 에서 5분 동안의 열처리 과정을 통하여 이동도 $16\;cm^2$/Vs, 전류 점멸비 $10^4$의 우수한 특성을 나타내었다. 열처리에 따른 표면 거칠기의 감소가 소자의 전기적 특성향상의 원인이라는 것을 AFM 이미지를 통하여 확인 할 수 있었다. 0.6%의 strain을 기판에 인가하면서 기판의 휘어짐에 따른 전류변화를 관찰하였다.

운모 기판을 플렉시블 다결정 실리콘 박막 트랜지스터에 적용하기 위한 버퍼층 형성 연구 (Formation of a Buffer Layer on Mica Substrate for Application to Flexible Thin Film Transistors)

  • 오준석;이승렬;이진호;안병태
    • 한국재료학회지
    • /
    • 제17권2호
    • /
    • pp.115-120
    • /
    • 2007
  • Polycrystalline silicon (poly-Si) thin film transistors (TFTs) might be fabricated on the mica substrate and transferred to a flexible plastic substrate because mica can be easily cleaved into a thin layer. To overcome the adhesion and stress problem between poly-Si film and mica substrate, a buffer layer consisting of $SiO_x/Ta/Ti$ three layers has been developed. The $SiO_x$ layer is for electrical isolation, the Ti layer is for adhesion of $SiO_{x}$ and mica. and Ta is for stress relief between $SiO_x$ and Ti. A TFT was fabricated on the mica substrate by a conventional Si process and was successfully transferred to a plastic substrate.

Sensor Applications of Thin-Film Transistors - Photosensor, Magnetic Sensor, Temperature Sensor and Chemical Sensor -

  • Kimura, Mutsumi;Miura, Yuta;Ogura, Takeshi;Hachida, Tomohisa;Nishizaki, Yoshitaka;Yamashita, Takehiko;Shima, Takehiro;Hashimoto, Hayami;Yamaguchi, Yohei;Hirako, Masaaki;Yamaoka, Toshifumi;Tani, Satoshi;Imuro, Yoshiki;Bundo, Kosuke;Sagawa, Yuki;Setsu, Koushi
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.957-960
    • /
    • 2009
  • Sensor applications of thin-film transistors (TFTs), such as photosensor, magnetic sensor, temperature sensor and chemical sensor, are introduced. Active-matrix circuits and amplifying circuits using poly-Si TFTs are integrated with these sensors to improve sensor performances and generate additional functions. These sensors may be promising applications after flat-panel displays (FPDs) in giant-micro electronics.

  • PDF

4.1” Transparent QCIF AMOLED Display Driven by High Mobility Bottom Gate a-IGZO Thin-film Transistors

  • Jeong, J.K.;Kim, M.;Jeong, J.H.;Lee, H.J.;Ahn, T.K.;Shin, H.S.;Kang, K.Y.;Park, J.S.;Yang, H,;Chung, H.J.;Mo, Y.G.;Kim, H.D.;Seo, H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.145-148
    • /
    • 2007
  • The authors report on the fabrication of thin film transistors (TFTs) that use amorphous indium-gallium-zinc oxide (a-IGZO) channel and have the channel length (L) and width (W) patterned by dry etching. To prevent the plasma damage of active channel, a 100-nm-thckness $SiO_{x}$ by PECVD was adopted as an etch-stopper structure. IGZO TFT (W/L=10/50${\mu}m$) fabricated on glass exhibited the high performance mobility of $35.8\;cm^2/Vs$, a subthreshold gate voltage swing of $0.59V/dec$, and $I_{on/off}$ of $4.9{\times}10^6$. In addition, 4.1” transparent QCIF active-matrix organic light-emitting diode display were successfully fabricated, which was driven by a-IGZO TFTs.

  • PDF

스퍼터 증착된 Zinc Tin Oxide 박막 트랜지스터의 공정 압력에 따른 특성 연구 (The Properties of RF Sputtered Zinc Tin Oxide Thin Film Transistors at Different Sputtering Pressure)

  • 이홍우;양봉섭;오승하;김윤장;김형준
    • 반도체디스플레이기술학회지
    • /
    • 제13권1호
    • /
    • pp.43-49
    • /
    • 2014
  • Zinc-tin oxides (ZTO) thin film transistors have been fabricated at different process pressure via re sputtering technique. TFT properties were improved by depositing channel layers at lower pressure. From the analysis of TFTs comprised of multi layer channel, deposited consecutively at different sputtering pressure, it was suggested that the electrical characteristics of TFTs were mainly affected by interfacial layer due to their high conductance, however, the stability under the NBIS condition was influenced by whole bulk layer due to low concentration of positive charges, which might be generated by the oxygen vacancy transition, from Vo0 to $Vo^{2+}$. Those improvements were attributed to increasing sputtered target atoms and decreasing harmful effects of oxygen molecules by adopting low sputtering pressure condition.

Advanced Amorphous Silicon TFT Backplane for AMOLED Display

  • Han, Min-Koo;Shin, Hee-Sun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
    • /
    • pp.1673-1676
    • /
    • 2007
  • We have investigated the degradation mechanism of hydrogenated amorphous silicon (a- Si:H) thin film transistors (TFTs) The threshold voltage of driving a-Si:H TFT is shifted severely by electrical bias due to a charge trapping and defect state creation. And the short channel TFTs exhibit less threshold voltage degradation than long channel TFTs. We propose the pixel circuits employing negative bias annealing scheme in order to suppression of threshold voltage shift of a-Si:H TFT.

  • PDF