Browse > Article
http://dx.doi.org/10.4313/JKEM.2014.27.6.350

Analysis on the Field Effect Mobility Variation of Tin Oxide Thin Films with Oxygen Partial Pressure  

Ma, Tae Young (Department of Electrical Engineering and ERI, Gyeongsang national University)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.27, no.6, 2014 , pp. 350-355 More about this Journal
Abstract
Bottom-gate tin oxide ($SnO_2$) thin film transistors (TFTs) were fabricated on $N^+$ Si wafers used as gate electrodes. 60-nm-thick $SnO_2$ thin films acting as active layers were sputtered on $SiO_2/Al_2O_3$ films. The $SiO_2/Al_2O_3$ films deposited on the Si wafers were employed for gate dielectrics. In order to increase the resistivity of the $SnO_2$ thin films, oxygen mixed with argon was introduced into the chamber during the sputtering. The mobility of $SnO_2$ TFTs was measured as a function of the flow ratio of oxygen to argon ($O_2/Ar$). The mobility variation with $O_2/Ar$ was analyzed through studies on crystallinity, oxygen binding state, optical properties. X-ray diffraction (XRD) and XPS (X-ray photoelectron spectroscopy) were carried out to observe the crystallinity and oxygen binding state of $SnO_2$ films. The mobility decreased with increasing $O_2/Ar$. It was found that the decrease of the mobility is mainly due to the decrease in the polarizability of $SnO_2$ films.
Keywords
Thin film transistors; Tin oxide; Mobility; XRD; XPS;
Citations & Related Records
연도 인용수 순위
  • Reference
1 T. Y. Ma, J. KIEEME, 25, 304 (2011).
2 Y. Huang, Z. Ji, and C. Chen, Appl. Surf. Sci., 253, 4819 (2007).   DOI   ScienceOn
3 A. L. Patterson, Phys. Rev., 56, 978 (1939).   DOI
4 E. Marquez, J. M. Gonzalez-Leal, R. Jimenez-Garay, S. R. Lukic, and D. M. Petrovic, J. Phys. D: Appl. Phys., 30, 690 (1997).   DOI   ScienceOn
5 T. Toyama, Y. Seo, T. Konishi, H. Okamoto, R. Morimoto, Y. Nishikawa, and Y. Tsutsumi, Thin Solid Films, 555, 148 (2014).   DOI   ScienceOn
6 D. K. Schroder, Semiconductor Material and Device Characterization (Wiley-Interscience Publication, 1990) p. 285.
7 E. Ziegler, A. Heinrich, H. Oppermann, and G. Stover, Phys. Status Solidi A, 66, 635 (1981).   DOI   ScienceOn
8 R. Swanepoel, J. Phys. E: Sci. Instrum. 16, 1214 (1983).   DOI   ScienceOn
9 A. Kumar, P. Zhang, A. Vincent, R. McCormack, R. Kalyanaraman, H. J. Cho, and S. Seal, Sensors and Actuators B: Chemical, 155, 884 (2011).   DOI   ScienceOn
10 N. Yamazoe, K. Suematsu, and K. Shimanoe, Sensors and Actuators B: Chemical, 176, 443 (2013).   DOI   ScienceOn
11 S. K. Lee, D. I. Chang, and S. W. Kim, J. of Hazard. Mater., 268, 110 (2014).   DOI   ScienceOn
12 C. N. Cha, M. H. Choi, and T. Y. Ma, Mater. Sci. in Semicon. Proc., 15, 240 (2012).   DOI   ScienceOn
13 L. Jie and X. Chao, J. of Non-Cryst. Solids, 119, 37 (1990).   DOI   ScienceOn
14 L. Y. Liang, Z. M. Liu, H. T. Caoz, Z. Yu, Y. Y. Shi, A. H. Chen, H. Z. Zhang, Y. Q. Fang, and X. L. Sun, J. Electrochem. Soc., 157, H598 (2010).   DOI   ScienceOn