• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1444-1446
• /
• 2009

The atmospheric pressure plasma polymerization of acrylate monomers was carried out to have dielectrics with easy preparation and high performance. The effects of discharge power, monomer concentration and deposition time on film properties were investigated using various characterization tools. With proper conditions, smooth dielectric layer of 100nm thickness was obtained. Dielectric property as organic dielectric layer has been studied for future applications in organic thin film transistors(OTFT).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.749-751
• /
• 2007

A buffer layer consisting of $SiO_x/Ta/Ti$ has been developed in order to overcome the adhesion and stress problems between poly-Si film and mica. Polycrystalline silicon thin film transistor was successfully fabricated on the mica and transferred to a flexible plastic substrate.

• 센서학회지
• /
• 제16권3호
• /
• pp.229-233
• /
• 2007

The indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. The ITO thin films deposited at room temperature because CR39 substrate its glass-transition temperature is $130^{\circ}C$. The ITO thin films used bottom and top electrode and for organic thin film transparent transistors (OTFTs). The ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300-800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of the ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300-800 nm) measured without post annealing process and a low resistivity value $9.83{\times}10^{-4}{\Omega}cm$ was measured thickness of 300 nm. All fabrication process of ITO thin films did not exceed $80^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.199-204
• /
• 2012

유기 박막 트랜지스터 (organic thin-film transistors; OTFTs)는 유기 반도체 그리고 디스플레이와 같은 분야에 그들의 잠재적인 응용 가능성 때문에 많은 주목을 받고 있다. 하지만 급격한 산화 혹은 낮은 전기 이동도와 같은 단점으로 인하여 n-형 물질은 p-형 물질에 비해서 상대적으로 많은 연구가 진행되지 못한 실정이다. 따라서 본 논문에서는 n-형 반도체 물질인 [6,6]-phenyl-C61-butyricacidmethylester (PCBM)과 Poly(4-vinylphenol) (PVP)을 유기 절연막으로 이용하여 o-dichlorobenzene, toluene and chloroform과 같은 다양한 유기 용매를 사용한 플라스틱 기판에 유기트랜지스터를 제작하였고 유기 용매가 ODCB 경우 전계 효과 이동도는 약 0.034 $cm^2/Vs$ 그리고 점멸비(on/off ratio)는 ${\sim}1.3{\times}10^5$ 으로 향상 되었다. 다양한 유기 용매의 휘발성에 따라서 PCBM TFT의 전기적 특성에 미치는 영향을 규명하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.247-250
• /
• 2008

Hafnium dioxide ($HfO_2$) thin film as a gate dielectric for organic thin film transistors is prepared by plasma enhanced atomic layer deposition (PEALD). Mostly crystalline of $HfO_2$ film can be obtained with oxygen plasma and with water at relatively low temperature of $200^{\circ}C$. $HfO_2$ was deposited as a uniform rate of $1.2\;A^{\circ}$/cycle. The pentacene TFT was prepared by thermal evaporation method with hafnium dioxide as a gate dielectric. The electrical properties of the OTFT were characterized.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.531-536
• /
• 2012

We herein present results of flat and uniform polymer-blended small molecular semiconductor thin films. Which were produced for organic thin film transistors (OTFTs), using a simple pre-metered horizontal dipping process. The organic semiconducting thin films were composed of 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-PEN) composite blended with a polymer binder of poly(${\alpha}$-methylstyrene) (PaMS). We show that the pre-metered horizontal-dip-coating(H-dip-coating) process allowed the critical control of the thickness of the blended TIPS-PEN:PaMs thin film. The fabricated OTFTs using the TIPS-PEN:PaMs films exhibited maximum field-effect mobility of $0.22\;cm^2\;V^{-1}\;s^{-1}$. These results demonstrated that H-dip-coated TIPS-PEN:PaMS films show considerable promise for the production of reliable, reproducible, and high-performance OTFTs.

• 전자공학회논문지D
• /
• 제36D권1호
• /
• pp.57-62
• /
• 1999

유리기판 위에 다결정 실리콘 박막 트랜지스터(Thin Film Transistor, TFT)를 형성하기 위해서 램프 Scanning 열처리 장치를 개발하였다. 선형 램프를 Scanning 함으로써 대면적 유리기판에의 적용 가능성을 높였으며 TFT의 채널 부분은 금속 유도 측면 결정화 방법에 의해 결정화 시켰다. 할로겐 램프에 의한 빛은 투명 유리기판은 가열시키지 않고 ,island 행태의 실리콘 박막만을 가열시킬 수 있었다. 실리콘 산화막으로 이루어진 Capping layer를 적용하였고 이때의 성장 속도는 Capping layer가 없는 경우보다 35배 정도로 빠른 MILC 성장 속도를 나타내었다. 할로겐 램프를 약 1.4mm/sec의 속도록 Scanning한 경우 유리기판의 손상 없이 18-27${\mu}m/scan$ 정도의 결정화를 나타내었다. 이와 같이 제작된 다결정 실리콘 박막으로 제작된 TFT는 전자이동도 130$cm^2/V{\cdot}sec$의 우수한 특성을 나타내었다.

• 폴리머
• /
• 제35권4호
• /
• pp.370-374
• /
• 2011

폴리아닐린(polyaniline, PANI) 전도성 고분자 용액을 camphorsulfonic acid(CSA)로 도핑하여 제조하였고 FTIR을 이용하여 고분자 중합 및 도핑유무를 확인하였다. 제조된 폴리아닐린을 스핀 코팅하여 유기박막 트랜지스터의 게이트 전극으로 사용하였으며, 열처리 온도변화에 따른 전기 전도도 변화를 4-probe measurement로 확인하였다. 또한 표면 특성을 이해하기 위해 atomic force microscope(AFM)와 optical microscope를 이용하였다. 폴리아닐린 게이트전극을 활용하여 얻은 유기박막 트랜지스터의 소자성능은 최고 이동도가 0.15 $cm^2$/Vs, 전류점멸비가 $2.4{\times}10^6$임을 확인하였다. 고분자 전극의 소지특성을 비교분석하기 위해, 같은 구조의 Au 전극소자를 제작하였다. Au 금속전극소자와 유사한 성능을 보인 폴리아닐렌 게이트 전극 소자는 플렉서블 유기박막 트랜지스터 전극으로 충분히 사용될 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2371-2376
• /
• 2009

Three phenoxazine-based conjugated polymers, namely, the aryl substituted phenoxazine homopolymer (P1) as well as the dimeric phenoxazine-fluorene (P2) and phenoxazine-bithiophene (P3) copolymers, were synthesized via the Ni(0) mediated Yamamoto reaction and the palladium-catalyzed Suzuki coupling reaction. The weight-averaged molecular weights ($M_w$) of P1, P2, and P3 were found to be 27,000, 22,000, and 15,000, respectively, and their polydispersity indices were 3.6, 1.8, and 2.1. All the polymers were soluble in common organic solvents such as chloroform, toluene, and so on. The UV-visible absorption maxima for P1, P2, and P3 in the film state were located at 421, 415 and 426 nm, respectively, and the ionization potentials of the polymers ranged between 4.90 and 5.12 eV. All the studied phenoxazine-based polymers exhibited amorphous behavior, as confirmed by X-ray diffraction (XRD) and atomic force microscopy (AFM) studies. Thin film transistors were fabricated using the top-contact geometry. P1 showed much better thin-film-transistor performance than P2 or P3: A thin film of P1 gave a saturation mobility of 0.81 ${\times}\;10^{-3}\;cm^2V^{-1}s^{-1}$ and an on/off ratio of about $10^2$.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.350-355
• /
• 2014

Bottom-gate tin oxide ($SnO_2$) thin film transistors (TFTs) were fabricated on $N^+$ Si wafers used as gate electrodes. 60-nm-thick $SnO_2$ thin films acting as active layers were sputtered on $SiO_2/Al_2O_3$ films. The $SiO_2/Al_2O_3$ films deposited on the Si wafers were employed for gate dielectrics. In order to increase the resistivity of the $SnO_2$ thin films, oxygen mixed with argon was introduced into the chamber during the sputtering. The mobility of $SnO_2$ TFTs was measured as a function of the flow ratio of oxygen to argon ($O_2/Ar$). The mobility variation with $O_2/Ar$ was analyzed through studies on crystallinity, oxygen binding state, optical properties. X-ray diffraction (XRD) and XPS (X-ray photoelectron spectroscopy) were carried out to observe the crystallinity and oxygen binding state of $SnO_2$ films. The mobility decreased with increasing $O_2/Ar$. It was found that the decrease of the mobility is mainly due to the decrease in the polarizability of $SnO_2$ films.