• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.99-113
• /
• 2022

This study is descriptive research to investigate the effects of COVID-19 stress, interpersonal (caregiver-patient) stress, and emotional labor on burnout in emergency room (ER) nurses during the COVID-19 pandemic. The data collection of this study was conducted from December 9 to 23, 2021 with ER nurses working at five tertiary general hospitals and general hospitals of Medical Center H. The data was collected with a questionnaire using tools measuring the subjects' general & job-related characteristics, COVID-19 stress, interpersonal(caregiver-patient) stress, emotional labor and burnout. The collected data was analyzed using the SPSS/WIN 25.0 statistical program for frequency analysis, descriptive statistical analysis, independent sample t-test, one-way ANOVA, Scheffé test, correlation analysis, and multiple regression analysis. The average score of COVID-19 stress in ER nurses was 3.64, interpersonal(caregiver-patient) stress 4.35, emotional labor 3.38, and burnout 3.44. As a result of analyzing differences according to general & job-related characteristics, burnout showed a significant difference according to gender, marital status, total clinical experience, and working organization. And burnout showed a significant positive correlation with COVID-19 stress, interpersonal stress and emotional labor. As a result of multiple linear regression analysis, regional emergency medical centers and local emergency medical centers among the work organization types, interpersonal stress, COVID-19 stress, and gender and the explanatory power was 28.6%. Through these results, we intend to provide basic data for the development of an intervention program to prevent burnout of emergency room nurses and improve nursing performance at the time of a new infectious disease pandemic.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.405-410
• /
• 2011

High-performance of an electric double layer capacitance (EDLC) electrode was prepared by the amino-fluorination of activated carbon by using $NF_3$ gas. The pore structure and surface chemistry were investigated based on the specific capacitance of EDLC. The amino-fluorination of activated carbon introduced functional groups of nitrogen and fluorine which are beneficial for the specific capacitance of EDLC without the change of pore structures. The E-NF100AC electrode, which has nitrogen and fluorine functional groups less than 1 at%, showed the highly improved specific capacitance of 528 (${\pm}9$) F/g at 2 mV/s showing 122% improved value when comparing with that of non-functionalized E-RAC electrodes. Whereas, the E-NF200AC electrode, which has nitrogen and fluorine functional groups over 1 at%, showed the decreased specific capacitance because of perfluorinated introduction. So, it is concluded that the proper contents of nitrogen and fluorine groups improved the specific capacitance of EDLC.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.4
• /
• pp.26-39
• /
• 2020

This study analyzed the usage characteristics and requirements of students who are users of the middle school education space, and the following results were obtained: First, we could see that various types of classes were needed, such as lecture-style classes, team projects, and four-person consultation and discussion classes, in a way that helped to improve the desirable teaching patterns and learning ability. Second, the place where space was used during the break and the relationship between peers, revealed that most of them were in the classroom and the hallway, and the peer group was composed of three to eight people or more, that were active with various compositions. Third, a gym, library, toilet, stairway, cafeteria, nurse's office, and teachers' room appeared in the center of the building, indicating the need for a balanced layout. Fourth, physical education (dance) rooms, audiovisual rooms (performance rooms), workshops (personal creation), snack bar, rest area, spacious indoor square, and study rooms were needed as facilities that can help learning activities other than current facilities. These outcomes show that the existing classroom layout and space composition formats require some spatial restructuring.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.639-652
• /
• 2021

In accordance with the rapidly changing social environment, it is becoming more important to cultivate creative and convergent practical talents with flexible thinking skills and problem-solving skills. Therefore, it is necessary for universities to provide educational experiences that enable students to cooperate and converge multidisciplinaryly to carry out on-the-job projects based on what they have learned at school. Therefore, this study designed, developed, and operated with the aim of cultivating creative talents with integrated problem-solving ability through a multidisciplinary capstone design curriculum based on industry-academia cooperation. To this end, the curriculum was developed together by recruiting participating companies and forming a convergence professor team, and it was operated for 15 weeks for students majoring in cosmetics engineering at D University. After the education was over, learning satisfaction and perceived academic achievement were surveyed, and as a result of the analysis, it was found to be above average with 3.77 points and 3.86 points, respectively. And as a result of the in-depth interview on the participation experience, five themes related to the positive experience and three themes related to the negative experience were derived. This study will be able to provide basic data when operating a multidisciplinary convergence capstone design curriculum based on industry-academia cooperation in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.19-31
• /
• 2021

This study aimed at comparing the performance of imported LX detergent cleaning solution (LX-CS) and the self-manufactured OC cleaning solution (OC-CS), based on functional and quantitative analysis. The functional analysis was carried out using apparent diffusion coefficient (ADC) values. For quantitative analysis, precision, linearity, and carry-over rates were measured with commercial control materials according to the Clinical and Laboratory Standards Institute (CLSI) guidelines. Using OC-Sensor PLEDIA (Eiken Chemical, Japan), the ADC value of all cuvettes satisfied the acceptance criteria. For quantitative analysis, precision was less than 5.0% for the two products, and carry-over rates were less than ±1.00%. The linearity slopes and r2 values were 1.0017 and 0.9982 in the LX-CS, and 0.9924 and 0.9996 in the OC-CS, respectively. The correlation coefficient (r) was found to be 0.9997. Also, the percent difference in correlation with 40 artificial-stool specimens was less than 10% and the p-value was less than 0.1. The result of standard deviation ratio (D: ±1 SD ratio) was similar for both products. In conclusion, the functional and quantitative analyses of the two products were compared and showed similar results. In the future, the self-manufactured OC-CS will be able to provide a much more stable and faster supply than the imported LX-CS.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2021

A Leg Mating Unit (LMU) is a device utilized during the float-over installation of offshore structures that include hyperelastic pads and mating part. The hyperelastic pads absorb the loads, whereas the mating part works as guidance between topside and supporting structures during the mating sequence of float-over installation. In this study, the design optimization of an LMU for the float-over installation of floating-type offshore structures is conducted to enhance the performance and to satisfy the requirements defined by classification society regulations. The initial dimensions of the LMU are referred to the dimensions of those used in fixed-type float-over installation because only the location and the number of LMUs are known. The two-parameter Mooney-Rivlin model is adopted to describe the hyperelastic pads under given material parameters. Geometric variables, such as the thickness, height, and width of members, as well as configuration variables, such as the angle and number of members, are defined as design variables and are parameterized. A sampling-based design sensitivity analysis based on latin hypercube sampling method is performed to filter the important design variables. The design optimization problem is formulated to minimize the total mass of the LMU under maximum von Mises stress and reaction force constraints.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.2
• /
• pp.65-75
• /
• 2022

On 11 June 2021, the Supreme Court ruled that the judgment of the lower court was justified for the subject case, that the plaintiff could assert the defendant's liability for default due to incomplete performance even though the warranty period for defects which stipulated in the particular condition of the contract has expired. In Korean civil law, the concurrent between the exclusion period for defect warranty and the extinctive prescription for default liability is conceded, since the exclusion period and the extinctive prescription have their respective purposes in law, therefore these two should be judged by harmonizing them based on that they are mutually related. If the subject judgment is generalized, there is no reason to exist for the provisions of defect liability in the construction contract any longer. This study examines the subject judgments through the general theory and precedent case studies on the defect liability and default liability, then derived any problems that may arise if the subject judgment is generalized. In addition, based on a realistic model, it was suggested for a practical improvement method that both the provisions of the warranty period shall be changed realistic and to stipulate the character of its nature as written provisions in the contract.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.3
• /
• pp.101-116
• /
• 2022

This study aims to apply the problem-based learning method to a college course on 'Consumer Studies' in a teacher education program. The participants of this study were 27 undergraduate students who were enrolled in the course. The PBL class was implemented for seven weeks using two problems: proposing special lectures on economic concepts and financial consulting. The effectiveness of PBL was analyzed through self-reflective journals, self-assessment, and a learning satisfaction survey of students. The result of this study was as follows. Students achieved the learning objectives and strengthened their collaboration and communication skills with team members during the PBL process. Moreover, students improved their self-directed learning and problem-solving ability through the PBL class. The results of self-assessment, in terms of learning task performance, active interaction, and self-directed learning were generally high at 4.63 points. In addition, the overall learning satisfaction level was very high, with a score of 4.75. The results will provide effective information on PBL classes to instructors and prospective teachers and will be used as data for learner-centered PBL classes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.403-421
• /
• 2021

Most of the urban tunnels in Korea, which are represented by the 1st to 3rd subways, use the drainage tunnel by NATM. Recently, when a construction project that actively utilizes large-scale urban space is promoted, negative effects that do not conform to the existing empirical rules of urban tunnels may occur. In particular, there is a high possibility that groundwater fluctuations and hydrodynamic behavior will occur owing to the practice of tunnel technology in Korea, which has mainly applied the drainage tunnel. In order to solve the problem of the drainage tunnel, attempts are being made to control groundwater fluctuations. For this, the establishment of tunnel groundwater management standard concept and the analysis of the tunnel hydraulic behavior were performed. To prevent the problem of groundwater fluctuations caused by the construction of large-scale tunnels in urban areas, it was suggested that the conceptual transformation of the empirical technical practice, which is applied only in the underground safety impact assessment stage, to the direction of controlling the inflow in the tunnel, is required. And the relationship between the groundwater level and the inflow of the tunnel required for setting the allowable inflow when planning the tunnel was derived. The introduction of a tunnel groundwater management concept is expected to help solve problems such as groundwater fluctuations, ground settlement, depletion of groundwater resources, and decline of maintenance performance in various urban deep tunnel construction projects to be promoted in the future.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.599-608
• /
• 2022

There has been criticism that the government-led makerspace did not reflect the actual demand of makers, so there was a limit to performance creation. In this regard, the study aims to diagnose the current status and problems of makerspace and to suggest the implication to respond to policy demand. To this end, we analyzed the current status of makerspace by utilizing the government documents. Then, we conducted a survey of SMEs related to ICT devices that experienced makerspace, and analyzed their opinions on D·N·A technology demand, management difficulties, and governments' support policies. As results, the study proposed several improvement measures to upgrade makerspace as a digital conversion platform as follows. First, due to the nature of the existing industry for introducing D·N·A technology, there is a limit for companies to enter the market on their own, so comprehensive support from the government is needed. Second, it is necessary to establish and expand an empirical test bed for the development of new products and services so that various types of metaverse contents can be discovered and digital transformation convergence models of existing businesses can be derived. Third, by modifying the support method to operate the makerspace as a platform that implements the government-led start-up support policy, boldly transfer what the private sector can do well to the private sector. The participants of Industry·University·Institute Collaboration should freely share ideas and help the common problem be solved. Based on the problems and the findings for improvement, it is expected that the current makerspace would be upgraded to a digital conversion platform suitable for the demand of the field.