• Journal of Microbiology and Biotechnology
• /
• v.20 no.6
• /
• pp.1032-1041
• /
• 2010

The comparative influence of two nanoparticles [viz., superparamagnetic iron oxide nanoparticles (SPION) and nanobarium titanate (NBT)] upon the in vitro and in situ low-density polyethylene (LDPE) biodegradation efficiency of a potential polymer-degrading microbial consortium was studied. Supplementation of 0.01% concentration (w/v) of the nanoparticles in minimal broth significantly increased the bacterial growth, along with early onset of the exponential phase. Under in vitro conditions, ${\lambda}$-max shifts were quicker with nanoparticles and Fourier transform infrared spectroscopy (FTIR) illustrated significant changes in CH/$CH_2$ vibrations, along with introduction of hydroxyl residues in the polymer backbone. Moreover, simultaneous thermogravimetric-differential thermogravimetry-differential thermal analysis (TG-DTG-DTA) reported multiple-step decomposition of LDPE degraded in the presence of nanoparticles. These findings were supported by scanning electron micrographs (SEM), which revealed greater dissolution of the film surface in the presence of nanoparticles. Furthermore, progressive degradation of the film was greatly enhanced when it was incubated under soil conditions for 3 months with the nanoparticles. The study highlights the significance of bacteria-nanoparticle interactions, which can dramatically influence key metabolic processes like biodegradation. The authors also propose the exploration of nanoparticles to influence various other microbial processes for commercial viabilities.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1545-1553
• /
• 2008

Using a one-pot reaction technique, monodisperse $\gamma-Fe_2O_3$ nanoparticles were prepared by thermal decomposition of Fe$(CO)_5$ in the presence of a long alkyl chain terminated dendron surfactant. The size of the particles is controlled by adjusting the concentration of the dendron ligands in the reaction solution. Spherical, 2 nm sized nanoparticles were obtained with a 3:1 ratio of dendrons to Fe$(CO)_5$, while 4.6 nm sized particles were formed with a 1:3 ratio. Superparamagetic properties of 2 nm, 4 nm, and 4.6 nm sized particles were measured using a SQUID magnetometer.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.209-219
• /
• 2013

We have used the modified diffusion flame burner to synthesize silica coated iron oxide nanoparticles having enhanced superparamagnetic property. Silica-encapsulated iron oxide particles were directly observed using a high resolution transmission electron microscope. From the energy dispersive X-ray spectroscopy (EDS) and zeta potential measurements, the iron oxide particles were found to be completely covered by a silica coating layer. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) measurements revealed that the iron oxide core consists of ${\gamma}-Fe_2O_3$ rather than ${\alpha}-Fe_2O_3$. Our magnetization measurements support this conclusion. Biocompatibility test of the silica-coated iron oxide nanoparticles is also conducted using the protein adsorption onto the coated particle.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.160-163
• /
• 2006

We have prepared crystalline Ag nanoparticles with an average size of 4 nm in diameter by using an inductively coupled plasma reactor equipped with the liquid nitrogen cooling system. Our magnetic data show that the nano-sized effect of Ag nanoparticles on the magnetic properties is ferromagnetic, instead of a diamagnetic component of the Ag bulk and a superparamagnetic component of magnetic nanoparticles. We have also studied the magnetic properties of Ag-Cu nanocomposites with an opposite concentration profile between surface and core. These comparisons indicate that the ferromagnetic component strongly depends on the surface of Ag nanoparticles, while the paramagnetic component is strongly affected by the outer oxide layer, with the background of a diamagnetic component from the core of Ag.

• Journal of Magnetics
• /
• v.9 no.3
• /
• pp.83-85
• /
• 2004

Magnetic nanoparticles have been investigated for use as biomedical purposes for several years. For biomedical applications the use of particles that present superparamagnetic behavior at room temperature is preferred [1-4]. To control the magnetic materials by magnetic field is essential locate particle to the suitable destination on feeding by injection. In order to use them properly, the particles should be nano size. However there are many difficulties in applications, because there is lack of identifications in nano magnetic properties. In our studies, structural and magnetic properties of iron oxide nanoparticles were investigated by XRD, VSM, TEM, and Mossbauer spectroscopy. At 13 K, hyperfine fields of ${\gamma}-Fe_2O_3$ were 516 kOe and 490 kOe, that of $Fe_3O_4$ were 517 kOe and 482 kOe. The saturation magnetizations were 21.42 emu/g and 39.42 emu/g. The particle size of powders is 5～19 nm.

• Korean Journal of Veterinary Research
• /
• v.55 no.1
• /
• pp.57-60
• /
• 2015

To investigate kinetics of free $^{177}Lu$ and $^{177}Lu$-labeled thermally cross-linked superparamagnetic iron oxide nanoparticles (TCL-SPION), suspensions were intravenously injected into the tail vein of mice at a dose of $5{\mu}Ci$/mouse or 15 mg/kg body weight, respectively. Free $^{177}Lu$ radioactivity levels were highest in kidney followed by liver and lung 1 day post-injection. $^{177}Lu$-labeled TCL-SPION radioactivity in liver and spleen was significantly higher compared to that of other organs throughout the experimental period (p < 0.05). Radioactivity in blood, brain, and epididymis rapidly declined until 28 days. Based on these results, TCL-SPION could be a safe carrier of therapeutics.

• Advances in nano research
• /
• v.5 no.2
• /
• pp.171-178
• /
• 2017

Superparamagnetic Zinc ferrite submicropheres are firstly synthesized via a one-pot solvothermal approach at $200-215^{\circ}C$ for 4-8 hours. $ZnCl_2$, $FeCl_3$ and NaAc are used as precursors with ethylene glycol solvent. The X-ray diffraction (XRD) data indicate that $ZnFe_2O_4$ nanoparticles with the grain size around $15{\pm}3nm$ can be successfully synthesized via the one-pot method. The scanning/transmission electronic microscope (SEM/TEM) images further show the samples are submicrospheres self-assembled by nanoparticles with size about 375-500 nm changed with reaction conditions. Room-temperature vibration magnetic strength measurements (VMS) demonstrates the as-obtained $ZnFe_2O_4$ submicrospheres show prefect superparamagnetism, whose coercivity force and remanence are practically nil. The reaction temperature and time influence on the crystallinity, diameter, saturated magnetic intensity and morphology of the particles.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.237-242
• /
• 2006

$Fe_3O_4$ and $CoFe_2O_4$ magnetic nanoparticles have been synthesized successfully in aqueous solution and coated with oleic acid. The solid and organic solution of the synthesized nanoparticles was obtained. Self-assembled monolayer films were formed using organic solution of these nanoparticles. The crystal sizes determined by Debye-Scherre equation with XRD data were found close to the particle sizes calculated from TEM images, and this indicates that the synthesized particles are nanocrystalline. Especially, EDS, ED, FT-IR, TGA/DTA and DSC were used to characterize the nanoparticles and the oleic acid adsorption, and it was found that oleic acid molecule on the $Fe_3O_4$ nanoparticle is a bilayer adsorption, while that on $CoFe_2O_4$ nanoparticle is single layer adsorption. The superparamagnetic behavior of the nanoparticles was documented by the hysteresis loop measured at 300 K.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.63-66
• /
• 2008

In order to the magnetization and magnetic entropy change for superparamagnetic ferrite nanoparticles, ultrafine cobalt ferrite particles were synthesized using a mircoemulsion method. The peak of X-ray diffraction pattern corresponds to a cubic spinel structure with the lattice constant 8.40 $\AA$. The average particle size, determined from X-ray diffraction line-broadening using Scherrer's, is 7.9 nm. The maximal magnetizations measured at 5 and 300 K are 24.3 emu/g and 17.2 emu/g, respectively. Superparamagnetic behavior of the sample is confirmed by the coincidence of the M vs. H/T plots at various temperatures. According to the thermodynamic theory, magnetic entropy change decreases with increasing temperature.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.463-470
• /
• 2019

Fe₃O₄/SiO₂/YVO₄:Eu³⁺ multifunctional nanoparticles are successfully synthesized by facile stepwise sol-gel processes. The multifunctional nanoparticles show a spherical shape with narrow size distribution (approximately 40 nm) and the phosphor shells are well crystallized. The Eu³⁺ shows strong photoluminescence (red emission at 619 nm, absorbance at 290 nm) due to an effective energy transfer from the vanadate group to Eu. Core-shell structured multifunctional nanoparticles have superparamagnetic properties at 300 K. Furthermore, the core-shell nanoparticles have a quick response time for the external magnetic field. These results suggest that the photoluminescence and magnetic properties could be easily tuned by either varying the number of coating processes or changing the phosphor elements. The nanoparticles may have potential applications for appropriate fields such as laser systems, optical amplifiers, security systems, and drug delivery materials.