• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.55-60
• /
• 2011

Recently, the application of electronics in vehicle is increasing, in order to assess the reliability of the electronics, highly accelerated life test is used, highly accelerated life test can assess the reliability of the electronics in the short time. In this study, optimized HALT technique can be applied to the electronics is proposed. The main results are as follows; i) HALT is proceed to the 8-step process. ii) The test mode of HALT is composed of the cold step stress, hot step stress, vibration step stress and combined environments stress. iii) The time dwell is set to at least 20 minutes.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.271-280
• /
• 2015

In this paper, the maximum likelihood estimators for parameters are derived under three step-stress accelerated life tests for Type-I hybrid censored data. The exponential distribution and the cumulative exposure model are considered based on the assumption that a log quadratic relationship exits between stress and the mean lifetime ${\theta}$. The test plan to search optimal stress change times minimizing the asymptotic variance of maximum likelihood estimators are presented. A numerical example to illustrate the proposed inferential procedures and some simulation results to investigate the sensitivity of the optimal stress change times by the guessed parameters are given.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.9-16
• /
• 2011

To develop a 6061 aluminum alloy with low residual stress and high tensile strength, a cryogenic treatment process was investigated. Compared to the conventional heat treatment process for precipitation hardening with artificial aging, the cryogenic treatment process has two additional steps. The first step is cryogenic quenching of the sample into liquid nitrogen, the second step is up-hill quenching of the sample into boiling water. The residual stress for the sample was measured by the $sin^2{\psi}$ method with X-ray diffraction. The 6061 aluminum alloy sample showed 67% relief in stress at the cryogenic treatment process with artificial aging at $175^{\circ}C$. From this study, it was found that the optimum cryogenic treatment process for a sample with low residual stress and high tensile strength is relatively low cooling speed in the cryogenic quenching step and a very high heating speed in the up-hill quenching step.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.356-363
• /
• 2018

The combination of a buck converter and a forward converter can be considered to accomplish a high step-down non-isolated converter. To decrease the insufficient step-down ratio of a regular buck converter and to distribute switch voltage stress, a forward-integrated buck (FIB) converter is proposed in this paper. The proposed interleaved DC-DC converter provides an additional step-down gain with the help of a forward converter. In addition to its simple structure, the transformer flux reset problem is solved and an additional magnetic core reset winding is not required. The operational principle and an analysis of the proposed FIB converter are presented and verified by experimental results obtained with a 240 W, 150 V/24 V prototype.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1375-1386
• /
• 2006

In life testing, the lifetimes of test units under the usual conditions are so long that life testing at usual conditions is impractical. Testing units are subjected to conditions of high stress to yield informations quickly. In this paper, the inferences of parameters on the three step-stress accelerated life testing are studied. The two-parameter exponential distribution with a failure rate function that a log-quadratic function of stress and the tempered failure rate model are considered. We obtain the maximum likelihood estimators of the model parameters and their confidence regions. A numerical example will be given to illustrate the proposed inferential procedures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.405-408
• /
• 2004

The forming load and the stress applied to dies during cold forming of automotive part using microalloyed forging steel are examined with finite element analysis. The forming load and the stress applied to dies at each process step are investigated for two types of forming process. The changes in forming process significantly affect the variation of firming load and the stress at each process step, thus it is considered that the die lift will be remarkably changed with the type of forming process, therefore optimal process design is necessary to obtain an increased the die life and to make the die life uniform at each process step.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.843-850
• /
• 2012

The inferences of data obtained from periodic inspection and type I censoring for the three step stress accelerated life test are studied in this paper. The failure rate function that a log-quadratic relation of stress and the tampered failure rate model are considered under the exponential distribution. The optimal stress change times which minimize the asymptotic variance of maximum likelihood estimators of parameters is determined and the maximum likelihood estimators of the model parameters are estimated. A numerical example will be given to illustrate the proposed inferential procedures.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1187-1194
• /
• 2017

In this paper, a high step-up DC-DC PWM converter with continuous input current and low voltage stress is presented for renewable energy application. The proposed converter is composed of a boost converter integrated with an auxiliary step-up circuit. The auxiliary circuit uses an additional coupled inductor and a balancing capacitor with voltage doubler and switching capacitor technique to achieve high step-up voltage gain with an appropriate switch duty cycle. The switched capacitors are charged in parallel and discharged in series by the coupled inductor, stacking on the output capacitor. In the proposed converter, the voltage stress on the main switch is clamped, so a low voltage switch with low ON resistance can be used to reduce the conduction loss which results in the efficiency improvement. A detailed discussion on the operating principle and steady-state analyses are presented in the paper. To justify the theoretical analysis, experimental results of a 200W 40/400V prototype is presented. In addition, the conducted electromagnetic emissions are measured which shows a good EMC performance.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.203-210
• /
• 2009

If there are some construction works that affect the stability of buried pipelines, the pipelines should be moved to guarantee their safety. In this paper, modeling methods for analyzing the movement of pipelines were sought, and the step-by-step stress estimation method of moving pipelines was developed. Some factors affecting of pipeline response such as the element type, the element size, boundary modeling, and geometric non-linearity were quantitatively investigated. In addition, some conditions in which accuracy and effectiveness can be compromised in the analysis of long pipelines were identified. A neural network was used to estimate the pipeline stress. The inputs to the neural network included step-by-step displacements, and the output was the resulting stress at each movement step. After training the neural network, it can be used to estimate pipeline stresses at some sub-steps that are not included in the training. A Windows-based stress estimation program was developed.

• The Korean Journal of Applied Statistics
• /
• v.2 no.2
• /
• pp.61-78
• /
• 1989

We consider the step stress life testing which has been developed in order to perform the life testing of the units whose normal life time is long within a reasonable amount of time. The models suggested for statistical analysis of the data obtained form the stress life testing are reviewed and a model which contains these models in some respect is suggested. The statistical inference based on the suggested model is done using maximum likelihood and weighted least square estimates. Finally we review the design of the simple step stress life testing and extend the result to the censoring case.