• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.62-68
• /
• 1996

Linear controllers, such as LQG/LTR controller, have been investigated to control flexible link manipulators. The performance and complexity of these depend largely on the linearized model upon which the controller is designed. In this study, singular perturbation model is tested in designing a LQG/LTR controller for a flexible link manipulator. The order of the resulting controller is much lower than the one based on a full model. Through numerical study, it is shown that the performance of the proposed controller reaches reasonably to the one based on the full model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.421-424
• /
• 1987

Recently, the problem associated with the achievement of desired trajectories for non-linear robotic manipulatory systems are researched. The control system which is designed for this robot manipulator, poses a number of severe problem. The methods proposed to deal with the problem fall loosely into three main classes : "direct" "adaptive", "anthropomorphic". Besides there is an approach which is described based upon the application of optimal control theory. In this paper, using the optimal theory, we choose error-coordinate, between the desired trajectories and the practical as the state values, and determine the control law U which minimize a corresponding performance criterion. Let's consider the robotic arm proposed by Freund and set up the deviations of it's trajectory as a measure of performance. To find the optimal control law $U^*$ and the next state value which need to obtain $U^*$ here, we should introduced the conjugate gradient algorithm and the Runge Kutta method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2874-2876
• /
• 2000

본 연구에서는 [1]에서 제안된 알고리즘을 마찰력이 존재하는 로봇 매니퓰레이터에 적용하여 위치제어를 수행하였다. 제안된 제어 알고리즘은 로봇의 위치 정보만을 이용하는 반복적 제어구조를 가지고 있다. 또한 제어기 설계 시, 로봇의 파라미터를 이용하지 않기 때문에 파라미터 불확실성이 있는 시스템에 강인한 특징을 보인다. 제안된 제어기의 성능을 검증하기 위하여.마찰력이 존재하는 2축 SCARA형 로봇에 적용하여 시뮬레이션 수행하였다

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.595-597
• /
• 2005

This paper shows the development of remote control system for manipulators which consists of PHANToM Device as a master, Samsung FARA robot as a slave and TCP/IP based LAN fortheir Communication. This work includes the motion mapping between the master and the slave, Generation of virtual viscosity force preventing operator's unwilled action and 3D remote control simulators for the stable operation of the remote control system, etc. The remote control implementation has been performed and the results shows that the developed system can allow the operator to effectively control the manipulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.558-560
• /
• 1998

The operation of robot manipulators has a restriction that the operator must reside at the factory, where the manipulator is used. To overcome this restriction, we propose a remote control system using the internet, the system which runs on the Window 95 environment is composed of the remote client which transfers commands to the server which control and manage the manipulator in the factory. In the control of Hong-ik Direct Drive Arm, it is necessary to consider the complex nonlinear parameters causing the mutual interaction between joints, so we use two TMS320C31 DSP chips in the controller for the real time dynamic control algorithms. For the test of system integrity and the verification of the mathematical modeling, we apply CTM, PD and VSS control algorithms and the simulation results are satisfactory.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.130-140
• /
• 2003

This paper presents an $H_\infty$controller synthesis based on disturbance observer for the trajectory control of a hydraulic excavator. Compared to conventional robot manipulators driven by electrical motors, hydraulic excavator have more nonlinear and coupled dynamics. In particular, the interactions between an excavation tool and the materials being excavated are unstructured and complex. In addition, its operating modes depend on working conditions, which make it difficult to not only derive the exact mathematical model but also design a controller systematically. In this study, the approximated linear model obtained through off-line system identification is used as nominal plant model for a disturbance observer. A disturbance observer based tracking controller which considers the effect of disturbance and model uncertainty is synthesized in $H_\infty$frameworks. Simulation results are used to demonstrate the applicability of the proposed control scheme.

• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.92-106
• /
• 1990

Active compliance is often used in the control of robot manipulators for the implementation of complex tasks such as assembly, multi-finger fine motion, legged-vehicle adaptive control,etc. This technique balances the interactive force between the manipulator tip and its working environment with its position and velocity errors to achieve the operation of a damped spring. This paper investigates the effecft of passive compliance on system stability with regard to force feedback implementation for actively compliant motion. Usually it is understood that accurate position control require a stiff system. However, theoretical examination of control experiments on a legged suspension vehicle suggests that, if the control includes discrete-time force feedback, some passive compliance is necessssary at the legs of the vehicle for system stability. This can be an important factor to bl considered in manipulator design and control. A theoretical analysis, numerical simulation, and experimental result, confirming the above conclusion, are introduced in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.46-48
• /
• 1996

In almost all the servo systems, especially for the robot manipulators and numerical control systems, there are resonance effects and nonlinear frictions which should be considered in designing servo controllers. In this paper to compensate friction and track the step-input without steady-state error, the original system is augmented with an integrator and employes $\mu$-Controller design method $\mu$-Controller design method enables to meet not only performance requirements but robust stabilities simultaneously. And there may exist a limit cycles due to interaction between integrator and nonlinear friction. With describing function method, the possibility of limit cycle is checked.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권3호
• /
• pp.256-262
• /
• 2012

Direct teaching of the industrial robot is a novel technique to easily teach manipulators. However, teaching data by human hand cannot help having large noise errors ranging from low to high frequency. To use teaching data, post-processing to correct the teaching trajectory is required. Here, a novel shape-based trajectory correction method to rebuild teaching data with the feature information of curvature and velocity is proposed. The proposed method is tested on square and circular objects.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.32-39
• /
• 2022

Since the mobile platform and the manipulator mounted on it move at the same time in a mobile manipulator, the risk of mutual collision increases. Most of the studies on collision avoidance of mobile manipulators cannot be applied to differential drive type mobile platforms or the end-effector tends to deviate from the desired trajectory for collision avoidance. In this study, a collision avoidance algorithm based on null space projection (CANS) that solves these two problems is proposed. To this end, a modified repulsive force that overcomes the non-holonomic constraints of a mobile platform is generated by adding a virtual repulsive force in the direction of its instantaneous velocity. And by converting this repulsive force into a repulsive velocity and applying it to the null space, the end-effector of the robot avoids a collision while moving along its original trajectory. The proposed CANS algorithm showed excellent performance through self-collision avoidance tests and door opening tests.