• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.8-16
• /
• 2010

NAND multilevel cell (MLC) flash memory is widely issued because it can increase the capability of storage by storing two or more bits to a single cell. However if a number of levels in a cell increases, some physical features like cell to cell interference result cell voltage shift and it is known that a VT shift is unidirectional. To reduce errors by the effects, we can consider error correcting codes(ECC) or signal processing methods. We focus signal processing methods for the cell to cell interference voltage shift effects and propose the algorithms which reduce the effects of the voltage shift by estimating it and making level read voltages be adaptive. These new algorithms can be applied with ECC at the same time, therefore these algorithms are efficient for MLC error correcting ability. We show the bit error rate simulation results of the algorithms and compare the performance of the algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.343-345
• /
• 2015

Currently, SAW Device has been used as a frequency filter using the property of passing only a desired frequency with a narrow bandwidth. However, the areas of activity in various fields since the permanent advantages can be widened by using a non-powered. These sensor tags using SAW Device has been done, but a lot of research, the development of the state still insufficient for Reader Platform. How to read the value of the ID Tag Using SAW Device has a time domain sampling (TDS) method and a frequency domain sampling (FDS) method. The purpose of the paper, we use the FDS method that requires high-speed processing with a relatively slow sampling rate does not require high-speed sampling. Reader Platform was the way to detect ID through PC as FDS way, but It is based on the Cortex-A9 processor and it works a low price, compact and real-time Reader Platform.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.18-24
• /
• 2010

A correct and accurate model of optical data storage systems is very important in development and performance evaluation of various data detection algorithms. In this paper, we present an nonlinear modeling scheme of a super-resolution near-field structure (Super-RENS) read-out signal using the canonical piecewise-linear (PWL) and the second-order Volterra models. Nonlinear equalizers may be developed on the basis of the information obtained from this nonlinear modeling. To mitigate the nonlinear inter-symbol interference (ISI), we proposed a new nonlinear equalizer for Super-RENS discs. Its validity is tested with the RF signal samples obtained from a Super-RENS disc. The experiment results verified the possibility that the canonical PWL and the second-older Volterra models can be utilized for nonlinear modeling of Super-RENS systems. The proposed equalizers are superior to the one without equalization in terms of bit error rate (BER).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.69-77
• /
• 1989

A hologram scanner for POS bar code symb9ol readers has been developed. This system is composed of scanning optics, optical detector, video signal circuitary and preprocessor. In contrast to conventional scanners using polygonal mirrors, which complicate the scanning optics, the hologram scanner developed in this research was made up with simple optics and higher reading performance was achieved. And in order to read abar code symbol omnidirectionally with highdensity scan patterns, the new real time decoding technique was proposed. The advantage of this technique is less hardware and lower clock rate. High speed processing and improved readability for tilted symbol was confirmed experimentally.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.12-17
• /
• 2016

In the holographic data storage system (HDSS), the data regarding the volume of a storage medium are recorded and read by the page, and the transmission rate and storage capacity can be increased because of two-dimensional, page-oriented data processing; furthermore, the multi-level HDSS can store more than one bit per pixel. For this same reason, however, and unlike conventional data-storage systems, the HDSS is hampered by two-dimensional (2D) intersymbol interference (ISI) and interpage interference (IPI). Progress regarding the published papers on 2D ISI, which is more severe in the multi-level HDSS, continues; however, mitigation of both 2D ISI and IPI in terms of the multi-level HDSS has not yet been studied. In this paper, we therefore propose a 4-level balanced-modulation code that simultaneously mitigates 2D ISI and IPI.

• Phonetics and Speech Sciences
• /
• v.11 no.4
• /
• pp.109-116
• /
• 2019

This study was conducted to identify the characteristics of pauses and breath groups made by normal adults and patients with voice disorders while reading a paragraph. Forty normal female adults and forty female patients with a functional voice disorder (18-45 yrs.) read the "Gaeul" paragraph with the "Running Speech" protocol of the Phonatory Aerodynamic System (PAS), by which the pauses with or without inspiration and between or within syntactic words and breath groups were analyzed. The number of pauses with inspiration was found to be higher in the patient group, but the number of pauses without inspiration was higher in the normal group. The rate of syntactic word boundaries with pauses with inspiration was higher in the patient group, while the number of syllables per breath group was higher in the normal group. As these results can be explained by patients' poor breath support due to glottal insufficiency, the question of whether voice disorder patients use their pauses and breath groups properly should be considered carefully in evaluation and intervention.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.47-52
• /
• 2009

H.264 video coding standard is widely used due to the high compression rate and quality. The motion compensation is the most time-consuming and complex unit in the H.264 decoder. The performance of the motion compensation is determined by the calculation of pixel interpolation and management of the reference pixels. The reference pixels read from external memory using efficient memory management for data reuse is necessary along with the high performance interpolators. We propose the architecture of a motion compensation unit for H.264 decoders. It is composed of 2-dimensional circular register files, a motion vector predictor and high performance interpolators with low complexity. The 2-dimensional circular register files reuse reference pixel data as much as possible, and feed reference pixel data to interpolators without any latency and complex logic circuits. We design a motion compensation unit and a intra-prediction unit and integrate them into a prediction unit and verify the operation and the performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.2
• /
• pp.267-279
• /
• 2017

This study emulated unscheduled phishing e-mails over a long period of time by imitating the manner in which external hackers attacked a group of employees in a company. We then measured and analyzed the recipient's ability to identify and respond to phishing e-mails as training progressed. In addition, we analyzed the changes in participants' response behavior when changing the external control condition between the training. As a result of the analysis, it was confirmed that the training duration had a positive (+) relationship with the employees' ability to identify phishing e-mails and the infection rate, and more employees read emails and infected with phishing attacks using social issues and seasonal events. It was also confirmed that reinforcement of internal control policy on infected persons affects positively (+) on the phishing attack response behavior of employees. Based on these results, we would like to suggest the right training method for each organization to enhance the ability of employees to cope with phishing attacks.

• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.440-447
• /
• 2007

In this study, a biosensor was developed using an enzyme-linked immunosorbent assay (ELISA) to rapidly measure the fungicide iprovalicarb residues in agricultural products. The biosensor was designed to include micro-pumps and solenoid valves for fluid transport, a spectrophotometer cuvet as a reaction chamber, a photodiode with a light-emitting diode for optical density measurement, and a control microcomputer to implement assay. The rate of change in optical density of the cuvet was read as final signal output. Micro-pumps were evaluated to investigate their delivery capability, the highest values of the error and the coefficient of variation were 4.3% and 4.6% respectively. As the incubation period was reduced from 15 minutes to 11 minutes to shorten the total processing time, the sensor sensitivity was decreased as the antibody dilution ratio was reduced to a half. The maximum usable period of the coated cuvet was found to be two days with 1% error limit. To predict the concentration of the iprovalicarb residue in agricultural products, a linear calibration model was obtained with r-square values of 0.992 for potato and 0.985 for onion. In validation test for the samples of potatoes and onions against the high performance liquid chromatography, very high correlation values were obtained as 0.996 and 0.993 respectively. Using the cuvet immobilized with antigen, it took 21-minutes for the biosensor to complete the measuring process of the iprovalicarb residues.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.167-167
• /
• 2011

Magnetic random access memory (MRAM) is one of the prospective semiconductor memories for next generation. It has the excellent features including nonvolatility, fast access time, unlimited read/write endurance, low operating voltage, and high storage density. MRAM consists of magnetic tunnel junction (MTJ) stack and complementary metal-oxide semiconductor (CMOS). The MTJ stack is composed of various magnetic materials, metals, and a tunneling barrier layer. For the successful realization of high density MRAM, the etching process of magnetic materials should be developed. Among various magnetic materials, FePt has been used for pinned layer of MTJ stack. The previous etch study of FePt magnetic thin films was carried out using $CH_4/O_2/NH_3$. It reported only the etch characteristics with respect to the variation of RF bias powers. In this study, the etch characteristics of FePt thin films have been investigated using an inductively coupled plasma reactive ion etcher in various etch chemistries containing $CH_4$/Ar and $CH_4/O_2/Ar$ gas mixes. TiN thin film was employed as a hard mask. FePt thin films are etched by varying the gas concentration. The etch characteristics have been investigated in terms of etch rate, etch selectivity and etch profile. Furthermore, x-ray photoelectron spectroscopy is applied to elucidate the etch mechanism of FePt thin films in $CH_4$/Ar and $CH_4/O_2/Ar$ chemistries.