• 제목/요약/키워드: polyacrylonitrile

검색결과 246건 처리시간 0.025초

아민화 폴리아크로니트릴 유도체 현탁액의 전기유변학적 특성 (Electrorheological Properties of Aminated Polyacrylonitrile Susupension)

  • 최웅수;김충현
    • Tribology and Lubricants
    • /
    • 제25권3호
    • /
    • pp.176-181
    • /
    • 2009
  • Aminated polyacrylonitrile as the new organic disperse phases of the anhydrous ER fluid has been synthesized and ER effect of the suspension composed of aminated polyacrylonitrile in silicone oil investigated. The suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the suspension exhibited the dependence with a factor equals to 1.6 power on theelectric field. The current density and the conductivity of the of aminated polyacrylonitrile suspension increase with the electric field intensity and moreover the conductivity of the suspension is about 8 order of magnitude higher than that of the silicone oil. On the basis of the the results, aminated polyacrylonitrile suspension showed the ER flow behavior upon application of the electric field due to the polarizability of the branched amine polar group of the aminated polyacrylonitrile particles.

Polyacrylonitrile과 셀룰로오스 아세테이트의 그라프팅에 관한 연구 (Grafting of Performed Polyacrylonitrile onto Cellulose Acetate)

  • 이명구;원종명
    • 임산에너지
    • /
    • 제17권1호
    • /
    • pp.30-35
    • /
    • 1998
  • 자유라디칼 반응기구에 의한 그라프팅 반응은 셀룰로오스의 낮은 반응 참여율, 반응의 저조한 반복성, 반응조절의 난이점, 특히 homopolymer의 높은 발생율로 인한 그라프팅 반응의 낮은 치환도 등의 문제를 지니고 있다. 이러한 문제를 해결하기 위하여 음이온중합 방법으로 polyacrylonitrile을 조제한 후 셀룰로오스 아세테이트와 균일계 반응조건에서 이분차 친핵치환(SN2) 반응기구에 의하여 그라프트 공증합 반응을 실시하였으며, 시간의 변화에 다른 겔의 형성과 그라프트 공중합 반응 전 후의 셀룰로오스 아세테이트의 FTIR spectra의 중요한 흡수대를 비교하여 반응을 확인하였다.

  • PDF

Polyacrylonitrile-Poly(vinyl chloride) 공중합체 완화스펙트럼의 실험과 이론적인 고찰 (Experimental and Theory for Relaxation Spectrum of Polyacrylonitrile-Poly(vinyl chloride) Copolymers)

  • 김남정
    • 폴리머
    • /
    • 제35권3호
    • /
    • pp.232-237
    • /
    • 2011
  • Polyacrylonitrile-poly (vinyl chloride) 공중합체의 완화스펙트럼을 이론적인 완화스펙트럼 식에 실험적인 응력완화 곡선을 대입하여 계산하였다. 이론적인 완화스펙트럼 식은 Ree-Eyring and Maxwell 모델로부터 유도하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였다. 완화스펙트럼의 계산은 컴퓨터 프로그램을 이용하였으며, 완화스펙트럼으로부터 고체 고분자의 미세구조, 점탄성적인 성실, 홀 부피가 연구되었다. 또한 이들 시료의 완화스펙트럼은 유동단위의 분자량과 자체확산 분포와 밀접한 관계가 있음을 알 수 있었다.

폴리아크릴로니트릴에 關한 硏究 (第 3 報) 폴리아크릴로니트릴에 對한 放射線照射에 關하여 (Studies on Polyacrylonitrile (3) Irradiation of Polyacrylonitrile)

  • 노익삼
    • 대한화학회지
    • /
    • 제11권2호
    • /
    • pp.77-80
    • /
    • 1967
  • Radiolysis of polyacrylonitrile(PAN) has been studied. Parameters for crosslinking and scission induced by gamma-ray irradiation were obtained by means of sol-gel partitioning method. G-value of crosslinking in PAN ($\bar{M}n=6{\times}10^5$) was 0.038 and the gel dose 21.6 Mrad. The effects of irradiation on the thermal degradation rate in PAN was also studied. No appreciable changes in thermal degradation rate observed up to 81.8 Mrad of irradiation dose.

  • PDF

Hydroxyapatite/Polyacrylonitrile 복합섬유의 제조 및 특성 (Preparation of fiber and Characterization of Hydroxyapatite/Polyacrylonitrile hybrid fiber)

  • 강성일;정용식;박병기
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.279-280
    • /
    • 2003
  • 아크릴계 섬유를 포함하여 기존 섬유의 새로운 용도 창출 및 부가가치를 높이기 위하여 특수한 기능성을 나타내는 섬유들에 대한 관심이 꾸준히 증가하고 있다[1]. 이러한 이유로 유기물질과 무기물질의 복합체 제조는 일찍이 1980년대 초부터 연구되고 있고, 새로운 성능 및 기능 화대를 목표로 계속 이루어지고 있다[2]. 폴리아크릴로니트릴(Polyacrylonitrile, PAN)은 용액방사를 하는 대표적인 합성섬유로 담요, 카페트, 커튼 등 다양한 제품으로 응용되고 있으며, 그 성질이 천연섬유인 양모와 유사하기 때문에 양모 대체용으로 많이 사용되고 있다[1]. (중략)

  • PDF

Improvement of gas sensing properties of carbon nanofibers based on polyacrylonitrile and pitch by steam activation

  • Kim, Jeongsik;Kim, Hyung-Il;Yun, Jumi
    • Carbon letters
    • /
    • 제24권
    • /
    • pp.36-40
    • /
    • 2017
  • Polyacrylonitrile/pitch nanofibers were prepared by electrospinning as a precursor for a gas sensor material. Pitch nanofibers were properly fabricated by incorporating polyacrylonitrile as an electrospinning supplement component. Polyacrylonitrile/pitch nanofibers were activated with steam at various temperatures followed by subsequent carbonization to make carbon nanofibers with a highly conductive graphitic structure. Steam activation was effective in facilitating gas adsorption onto the carbon nanofibers due to the increased surface area. The carbon nanofibers activated at $800^{\circ}C$ had a larger surface area and a lower micro pore fraction resulting in a higher variation in electrical resistance for improved CO gas sensing properties.

혈당측정을 위한 폴리아크릴로니트릴 진단막의 제조(3) : 보관 환경이 글루코우즈의 농도 측정에 미치는 영향 (The Preparation of Polyacrylonitrile Diagnostic Membranes for Blood Glucose Measurements (3) : Effects of Storage Environments on the Measurements of Glucose Concentration)

  • 권석기;유재우
    • 멤브레인
    • /
    • 제19권3호
    • /
    • pp.222-227
    • /
    • 2009
  • 당뇨병 환자의 자가 혈당 측정 장치에 사용할 수 있는 폴리아크릴로니트릴 진단막을 제조하였다. 제조된 폴리아크릴로니트릴 진단막을 여러 가지 환경에서 보관한 후 혈액 속의 글루코우즈의 농도를 변화시켜가며 680 nm에서의 최종 흡광도를 측정하였다. 측정된 혈당치가 보관 온도의 변화에 따라서는 크게 차이를 보이지 않았다. 다만 여러 가지 습도에서 보관한 후 측정한 결과 높은 습도에서 장기간 보관한 후의 혈당치가 기준 값보다 다소 감소하는 것을 알 수 있었다.

혈당측정을 위한 폴리아크릴로니트릴 진단막의 제조에 관한 연구(1) : 온도와 습도가 글루코우즈의 농도 측정에 미치는 영향 (The Preparation of Polyacrylonitrile Diagnostic Membranes for Blood Glucose Measurements (1) : Effects of Temperature and Humidity on the Measurements of Glucose Concentration)

  • 권석기;박인희;윤도영
    • 멤브레인
    • /
    • 제17권4호
    • /
    • pp.369-374
    • /
    • 2007
  • 당뇨병 환자의 혈당치 측정을 위하여 폴리아크릴로니트릴로 만들어진 진단막을 제조하였다. 플라즈마속의 글루코우즈의 농도를 변화시켜 가며 활성화된 폴리아크릴로니트릴 진단막을 가지고 680 nm에서의 최종흡광도를 측정하였다. 흡광도로부터 얻어진 최종 K/S 결과치가 글루코우즈의 농도와 직선적으로 비례하였다. 온도가 글루코우즈 농도 측정에 미치는 영향을 조사하였다. 폴리아크릴로니트릴 진단막의 안정성을 상대습도 80%에서 측정하였다.

공기분위기 하에서 열처리된 고입체 규칙성 폴리아크릴로니트릴의 XRD에 의한 환화반응 속도 연구 (Kinetic Study of Cyclization of High-Tacticity Polyacrylonitrile Heat-Treated under Air Atmosphere via XRD)

  • Xu, Zhi-Xian;Xu, Jing;Xu, Liang-Hua;Dai, Yong-Qiang;Xue, Li-Wei;Jin, Ri-Guang
    • 폴리머
    • /
    • 제32권2호
    • /
    • pp.150-156
    • /
    • 2008
  • Two different polyacrylonitrile samples (PANs, triad tacticity fraction is 0.25 and 0.64) were synthesized and used to study the kinetics of cyclization. Polymers were treated at different temperatures between 250 to $300^{\circ}C$ under air atmosphere, and analyzed by X-ray diffractometer. The sharp and strong peak at $2{\theta}=16.5^{\circ}$ corresponds to a lateral repeat distance that is the (100) diffraction in hexagonal lattice, while the peak at $2{\theta}=25.5^{\circ}$ reflects the (101) diffraction. In comparing their areas of different heat treated samples, the cyclization of both PANs was identified as a first-order reaction. The rate constants of cyclization reaction at different temperatures and the active energy parameter were obtained. This results might provide an important effect on pre-oxidation of polyacrylonitrile fiber.

Gas Separation of Pyrolyzed Polymeric Membranes: Effect of Polymer Precursor and Pyrolysis Conditions

  • Jung, Chul-Ho;Kim, Gun-Wook;Han, Sang-Hoon;Lee, Young-Moo
    • Macromolecular Research
    • /
    • 제15권6호
    • /
    • pp.565-574
    • /
    • 2007
  • In this study, five representative, commercially available polymers, Ultem 1000 polyetherimide, Kapton polyimide, phenolic resin, polyacrylonitrile and cellulose acetate, were used to prepare pyrolyzed polymer membranes coated on a porous {\alpha}-alumina$ tube via inert pyrolysis for gas separation. Pyrolysis conditions (i.e., final temperature and thermal dwell time) of each polymer were determined using a thermogravimetric method coupled with real-time mass spectroscopy. The surface area and pore size distribution of the pyrolyzed materials derived from the polymers were estimated from the nitrogen adsorption/desorption isotherms. Pyrolyzed membranes from polymer precursors exhibited type I sorption behavior except cellulose acetate (type IV). The gas permeation of the carbon/{\alpha}-alumina$ tubular membranes was characterized using four gases: helium, carbon dioxide, oxygen and nitrogen. The polyetherimide, polyimide, and phenolic resin pyrolyzed polymer membranes showed typical molecular sieving gas permeation behavior, while membranes from polyacrylonitrile and cellulose acetate exhibited intermediate behavior between Knudsen diffusion and molecular sieving. Pyrolyzed membranes with molecular sieving behavior (e.g., polyetherimide, polyimide, and phenolic resin) had a $CO_2/N_2$ selectivity of greater than 15; however, the membranes from polyacrylonitrile and cellulose acetate with intermediate gas transport behavior had a selectivity slightly greater than unity due to their large pore size.