• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.852-855
• /
• 2002

This paper presents a design of FIR near-equiripple Nyquist filters having zero-intersymbol interference (ISI) and low sensitivity to timing jitter, with coefficients taking only discrete values. Using an affine scaling linear programming algorithm, an optimum discrete coefficient set can be obtained in a feasible computational time. Also presented is a pipelined multiplier-free FIR filter realization with periodically time-varying (PTV) coefficients based on a hybrid form suitable for Nyquist filter. The realization exploits the coefficient symmetry to reduce the hardware by about one half. High speed computation and low power consumption are achieved by its pipelined and low fan-out structure.

• 전자공학회논문지B
• /
• 제32B권3호
• /
• pp.11-23
• /
• 1995

In this paper, a parallel pipelined processor model which acts as a small VLIW processor architecture and a scheduling algorithm for extracting instruction-level parallelism on this architecture are proposed. The proposed model has a dual-instruction mode which has maximum 4 basic operations being executed in parallel. By combining these basic operations, variable instruction set can be designed for various applications. The scheduling algorithm schedules basic operations for parallel execution and removes pipeline hazards by examining data dependency and resource conflict relations. In order to examine operation and evaluate the performance,a C compiler and a simulator are developed. By simulating various test programs with the compiler and the simulator, the characteristics and the performance result of the proposed architecture are measured.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.220-228
• /
• 1995

An optimized 4-stage 12-bit pipelined CMOS analog-to-digital converter (ADC) architecture is proposed to obtain high linearity and high yield. The ADC based on a multiplying digital-to-analog converter (MDAC) selectively employs a binary-weighted-capacitor (BWC) array in the front-end stage and a unit-capacitor (UC) array in the back-end stages to improve integral nonlinearity (INL) and differential nonlinearity (DNL) simultaneously whil maintaining high yield. A digital-domain nonlinear error calibration technique is applied in the first stage of the ADC to improve its accuracy to 12-bit level. The largest DNL error in the mid-point code of the ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is simulated to prove the effectiveness of the proposed ADC architecture.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.246-251
• /
• 2006

In this paper, we introduce an implementation method of the CBS (Cycle Base Simulator), which describes the operation of a DSP (Digital Signal Processor) at a pipeline cycle level. The CBS is coded with C++, and is verified by comparing the results from the CBS and HDL simulation of the DSP with the various test vectors and application programs. The CBS shows the data about the internal registers, status flags, data bus, address bus, input and output pin of the DSP, and also the control signals at each pipeline cycle. The developed CBS can be used in evaluating the performance of the target DSP before the RTL(Register Transfer Level) coding as well as a reference for the RTL level design.

• 한국통신학회논문지
• /
• 제32권10C호
• /
• pp.1019-1024
• /
• 2007

본 논문에서는 무선 랜 시스템용 10비트 20MHz 파이프라인 아날로그-디지털 변환기 설계를 위해서 Verilog-A 언어를 사용하여서 모델링하였다. 변환기내 샘플 / 홀드 증폭기, 비교기, MDAC 및 오차 보정 회로 등의 구성회로들을 각각 모델링해서 모의실험 한 결과 HSPICE를 이용한 모의 실험 시간보다 1/50배로 단축되어서 시스템 모델링에 적합함을 확인하였다.

• 한국통신학회논문지
• /
• 제25권11A호
• /
• pp.1652-1660
• /
• 2000

본 논문에서는 DS/CDMA (Direct Sequence/Code Division Multipe Access) 시스템에서 임시 판정 함수로서 연판정 함수와 경판정 함수를 적용한 파이프라인화된 직렬 간섭 제어 구조(PSIC, Pipelined Successive Interference Cancellation)의 성능을 수식적으로 분석하고, 모의 실험을 통하여 검증한다. PSIC 구조는 다단 직렬 간섭 제거 구조(MSIC, Multistage Successive Interference Cancellation)가 가지는 복호지연(decoding delay)의 문제를 해결하기 위해 파이프라인 구조를 MSIC에 적용한 것이다. 제안된PSIC 구조는 하드웨어의 복잡도(hardwar complexity)를 희생하여 비트 오율(BER, Bit Error Rate)의 증가 없이 MSIC에서 발생하는 복호 지연을 줄일 수 있다. 또한 제안된 PSIC 구조에서 연판정 함수와 경판정 함수를 각 간섭 제거 단(Cancellation stage)에서의 임시 판정 함수로 사용하여 얻게 되는 PSIC 구조들의 성능을 비교한다. 분석 및 실험 결과에 의하면 제안되 PSIC 구조에서는 경판정 함수를 사용할때의 성능이 연판정 함수를 사용할때의 성능보다 우수함을 알 수 있었다.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권7호
• /
• pp.909-915
• /
• 1999

In this paper, we propose an efficient VLSI architecture of Reed-Solomon(RS) decoder. To improve the speed. we develope an architecture featuring parallel and pipelined processing. To implement the parallel and pipelined processing architecture, we analyze the RS decoding algorithm and the honor's algorithm for parallel processing and we also modified the Euclid's algorithm to apply the efficient parallel structure in RS decoder. To show the proposed architecture, the performance of the proposed RS decoder is compared to Shao's and we obtain the 10 % efficiency in area and three times faster in speed when it's compared to Shao's time domain decoder. In addition, we implemented the proposed RS decoder with Altera FPGA Flex10K-50.

• 대한전자공학회논문지
• /
• 제27권7호
• /
• pp.1005-1014
• /
• 1990

This paper proposes the control unit of a 32-bit high-performance RISC type microprocessor. This control unit controls the whole data path of target processor and on chip instruction/data caches in 4-stage pipelined scheme. For the improvement of speed, large parts of data path and control unit are designed by domino-CMOS and hard-wired circuit technology. First, in this paper, target processor's instruction set and data path are defined, and next, all signals needed to control the data path are analyzed. The decoder of control unit and clock generated logic block are implemented in DCAL(Dynamic CMOS Array Logic) with modified clock scheme for the purpose of speed up and supporting RISC processor's pipelined architecture efficiently.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.651-652
• /
• 2006

In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.