• Steel and Composite Structures
• /
• 제36권4호
• /
• pp.447-462
• /
• 2020

The paper aims to investigate the mechanical mechanism and seismic effect of stiffeners in blind bolt endplate connection to CFST column. A precise 3D finite element model with considering the cyclic properties of concrete and steel materials was established, and the efficiency was validated through monotonic and cyclic test data. The deforming pattern and the seismic performance of the unstiffened and stiffened blind bolt endplate connections were investigated. Then a parametric analysis was conducted to analyze the contribution of stiffeners and the joint working behaviors with endplate under cyclic load. The joint stiffness classifications were compared and a supplement stiffness classification method was proposed, and the energy dissipation ability of different class connections were compared and discussed. Results indicated that the main deformation pattern of unstiffened blind bolt endplate connections was the local bending of end plate. The vertical stiffeners can effectively alleviate the local bending deformation of end plate. And influence of stiffeners in thin endplate and thick endplate was different. Based on the stiffness of external diaphragm welded connection, a more detailed rigidity classification was proposed which included the pin, semi-rigid, quasi-rigid and rigid connection. Beam was the main energy dissipation source for rigid connection. For the semi-rigid and quasi-rigid connection, the extended endplate, stiffeners and steel beam would all participate in the energy dissipation.

• 한국광학회지
• /
• 제10권1호
• /
• pp.73-79
• /
• 1999

1$\times$2, 1$\times$4 및 4$\times$4 LD-gate형 반도체 광스위치 모듈을 제작하였다. 스위치 소자와 광섬유와의 광결합을 위해서 테이퍼드 광섬유를 어레어로 제작하여 사용하였으며 30핀 버터플라이형 패키지로 완성하였다. 광 부푼 정렬 및 고정에서는 레이저 용접법 및 햄머링 공정을 이용하여 최초의 광정렬 값에서 평균 82%까지 복원하였다. 완성된 모듈에 대한 평가를 위해 전송 실험을 수행하였는데 1$\times$2 스위치 모듈이 삽입되었을 때 223-1의 단어길이를 갖는2.5Gbps 광신호에 대해서 전송패널티가 약0.5dB~2dB로 나타났으며, 광섬유의 분산특성에 의하여 발생하는 전송 패널티에 대해서는 50km 및 90km 광섬유에 대해서 각각 0.6dB 및 0.7dB의 작은 패널티가 발생하였다. 1$\times$4 및 4$\times$4 스위치 모듈을 이용한 전송특성 평가에서도 모두 -30dB 이하의 수신감도를 갖는 우수한 결과를 보였다.

• 셀메드
• /
• 제2권3호
• /
• pp.26.1-26.5
• /
• 2012

Adverse side-effects and lack of scientific validation of some chemotherapeutic agents prevent the use of many traditional medicines claimed to have anti-cancer effects. Ethanolic extract of Conium maculatum has long been used in traditional and alternative systems of medicine including homeopathy for the treatment of glandular enlargements, cancerous tumours or hard lumps of testicles, prostate, ovaries, breasts and/ or uterus, particularly in the breast. However, if and how it acts still remains scientifically unknown. This study aims to test if Conium extract (CE), used as mother tincture of Conium in homeopathy, has demonstrable anti-cancer potentials without having much cytotoxicity in normal cells. Cytotoxicity of the drug was tested by conducting MTT assay on both normal (peripheral blood mononuclear cells) and HeLa cells. We also evaluated DNA fragmentation and DNA damage by DAPI and diphenylamine assay. The LDH activity assay was done to evaluate the percentages of apoptosis and necrosis. ROS accumulation also was evaluated to pin-point the actual events of apoptosis. Administration of drug clearly demonstrated its anti-cancer potentials as evidenced by the DNA damage analysis. The ROS activity also increased in case of the CE treated cells. LDH data revealed that the mode of cell death was mainly apoptotic and not necrotic. CE appears to induce apoptosis of cancer cells through ROS mediated pathway, and has negligible cytotoxicity against normal cells.

• Toxicological Research
• /
• 제21권1호
• /
• pp.45-49
• /
• 2005

The purpose of this study is to evaluate the free radical scavenging ability and xanthine oxidase inhibitory activity of a complex herbal bath consisted of Artemisiae argyi folium, Angelicae sinensis radix, Ligustici wallichii radix and Angelicae tuhuo radix, and its potential irritation response were also tested for safety use in the rabbits. For antioxidative activity, the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity of the complex herbal bath were examined at five different concentrations (0, 250, 500, 1000 and 2000 ㎍/ml). The concentration of the complex herbal bath required for scavenging DPPH free radical by 50% was 897.2 ㎍/ml. In the inhibition of xanthine oxidase (XO) activity, the concentration of the complex herbal bath required for 50% of inhibition was 221.4 ㎍/ml. In the skin irritation study in rabbit, all animals survived for the duration of the study and the examined skin exhibited no edema, erythema, and eschar formation. In the ocular irritation study in rabbit, after application of the sample to eyes, all of the eyes were normal. In summary, the complex herbal bath has potent antioxidant effects against the DPPH radical and XO and was considered to be a non-irritation bath for safety use.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.124-132
• /
• 2020

The effect of the stoichiometry on the sliding wear properties of NiAl coatings has been investigated. Three different powder mixtures with the compositions of Ni-50at%Al, Ni-54at%Al and Ni-42at%Al were diepressed respectively, and which were subsequently coated on mild steel through combustion synthesis in an induction heating system. Sliding wear behavior of the coatings was examined against an alloyed tool steel using a pin-on-disc type sliding wear test machine. As results, it could be seen that powder mixture(Ni-54at%Al) with displaying Al-rich deviations from the stoichiometry of NiAl(Ni-50at%Al) was promoted the most the synthetic reactivity. The microstructure of the coating layer with the compositions of Ni-54at%Al exhibits the porous NiAl single phase structure. However, the microstructure of the coating layer of the compositions of Ni-42at%Al exhibits the denser multi-phase structure containing several intermediate phases in addition to NiAl. Densification of the coating layer was enhanced by increasing the reacting temperature. On the other hand, the wear properties of the coating layers showed that the wear mode at speeds of around 1 m/s was severe wear, regardless of the stoichiometry and reacting temperature. However, wear properties of coating layer with the compositions of Ni-42at%Al were superior to those of coating layer with the compositions of Ni-54at%Al. This would be attributed by the fact that coating layer with the compositions of Ni-42at%Al develops little void and much intermediate phases with high strength.

• 한국정보통신학회논문지
• /
• 제17권2호
• /
• pp.405-413
• /
• 2013

본 논문에서는 program-verify-read 모드를 갖는 고신뢰성 24bit differential paired eFuse OTP 메모리를 설계하였다. 제안된 program-verify-read 모드에서는 프로그램된 eFuse 저항의 변동을 고려하여 가변 풀-업 부하(variable pull-up load)를 갖는 센싱 마진 테스트 기능을 수행하는 동시에 프로그램 데이터와 read 데이터를 비교하여 PFb(pass fail bar) 핀으로 비교 결과를 출력한다. 그리고 모의실험 결과 program-verify-read 모드에서 24-비트 differential paired eFuse OTP와 24-비트 듀얼 포트 eFuse OTP IP의 센싱 저항은 각각 $4k{\Omega}$과 $50k{\Omega}$으로 differential paired eFuse OTP의 센싱 저항이 작게 나왔다.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.32-40
• /
• 2015

The torque shear high strength bolt is clamped normally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the required tension, as it considerably fluctuates due to torque coefficient dependent on lubricant affected temperature. In this study, the clamping tests of torque shear bolts were conducted independently at indoor conditions and at construction site conditions. During last six years, temperature of candidated site conditions was recorded from $-11^{\circ}C$ to $34^{\circ}C$. The indoor temperature condition was ranged from $-10^{\circ}C$ to $50^{\circ}C$ at each $10^{\circ}C$ interval. As for site conditions, the clamping force was reached in the range from 159 to 210 kN and the torque value was from 405 to $556 N{\cdot}m$. The range of torque coefficient at indoor conditions was analyzed from 0.126 to 0.158 while tensions were indicated from 179 to 192 kN. The torque coefficient at site conditions was ranged from 0.118 to 0.152. Based on this test, the variable trends of torque coefficient, tension subjected temperature can be taken by statistic regressive analysis. The variable of torque coefficient under the indoor conditions is $0.13%/^{\circ}C$ while it reaches $2.73%/^{\circ}C$ at actual site conditions. When the indoor trends and site conditions is combined, the modified variable of torque coefficient can be expected as $0.2%/^{\circ}C$. and the modified variable of tension can be determined as $0.18%/^{\circ}C$.

• KIEAE Journal
• /
• 제8권3호
• /
• pp.77-83
• /
• 2008

The effective mixture of structural laminated timber and other materials is expected to extend the potentials of building structures because of the potentials to realize high performance in structural safety. The classical joint types using drift pin and bolts are occurred local failures due to the small bearing area. In result, new joints using H shaped steel were suggested in this research. The objective of this study is to evaluate elasto-plastic behaviors by strengthening types of wood frames with new joints connecting structural laminated timber with H shaped steel. A total of five specimens of about one-second scale were tested. Specimens had columns with 1,050 height and $84mm{\times}100mm$ section, and a beams with 1,950mm length and $130mm{\times}100mm$ section. Also, the specimens were stiffened by brace, hwang-toh brick, and autoclaved lightweight concrete. The results of the test showed that the specimen stiffened with autoclaved lightweight concrete was characterized by fairly good strength and stiffness than those of the other specimens. Initial stiffness of H-2.0D-NS specimen with 2 times inserting length of beam height showed 1.33 times than that of H-1.5D-NS specimen. However, the strength of H-2.0D-NS specimen has not improved too much than H-1.5D-NS specimen.

• 한국컴퓨터정보학회지
• /
• 제14권2호
• /
• pp.205-214
• /
• 2006

유비쿼터스 컴퓨팅 시대의 업무를 위하여 인터넷을 통한 원격 접속이 필요하고, 입력되는 ID와 패스워드에 대한 기밀성 무결성의 네트워크 보안을 위하여 OTP를 적용하고 있다. 현재의 OTP는 Token이라는 하드웨어를 보유하고 있어야 하며, 보안에서도 취약점이 있다. 본 논문에서는 OTP 네트워크에 스니핑 도구를 설치하고, Cain을 이용하여 ARP Cache poisoning 공격을 시행하여 사용자 암호에 대하여 스니핑으로 취약점을 확인한다. 새로운 보안 방안으로 Tokenless OTP를 적용할 수 있는 새로운 시스템을 제안하고, 기밀성과 무결성을 보장하고자 한다. 외부에서 원격 접속 시 Tokenless OTP를 활용하여 접근제어를 위한 테스트를 하고, 접속에서 인증시스템과 연동하여 접속제어를 할 수 있었다. 만약 인증과정에서 해킹을 당해도 사용자만이 알고 있는 핀 번호 없이는 접속이 불가능하다는 것이 확인되었다. 이 결과 Tokenless OTP를 적용할 시에 패스워드의 유출 및 오용과 해킹에 대한 방어가 되어 보안성을 강화하고, 안전성을 높이는 보안 시스템으로 평가되었다.

• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.9-18
• /
• 1998

본 논문에서는 E-GSM 단말기용 Transceiver RFIC 칩 수신단의 회로설계, 제작 및 특성측정을 수행하였다. AMS사의 0.8${\mu}m$ 실리콘 BiCMOS 공정을 사용하여 $10 {\times} 10 mm$ 크기를 갖는 80핀 TQFP 패키지로 제작하였으며, 동작전압 3.3V에서 우수한 RF 성능을 얻었다. 제작된 RFIC의 수신단에는 LNA, Down Conversion Mixer, AGC, SW-CAP 및 Down Sampling Mixer를 포함하고 있으며, 제작된 RFIC의 사용 주파수 범위는 925 ~ 960MHz, 전류소모는 67mA, 최소검출레벨은 -105dBm의 특성을 얻었다.